• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.214-218
• /
• 2011

In order to survive in turbulent and competitive markets, automotive part manufacturers try efforts to develop new manufacturing technologies for ultra-lightweight, high-intensity and environmentally-friendly parts. Most of front lower arm is manufactured by welding process between upper- and lower panel which are produced by press stamping process. Because lower arm mounted on the cross member parts is one of the important complementary parts. So, to improve safety and lightweight of these parts, hybrid technologies are used in this paper. As hybrid technologies are applied to be front sub-frame, rear cross member and other chassis parts as well as front lower arm, the 20% lightweight has been achieved compared with existing steel parts.

• 대한산업공학회지
• /
• 제42권5호
• /
• pp.360-369
• /
• 2016

This study attempted to identify the effect of the panel stiffness on the customers' affect, which was not addressed in the research field of affective engineering. For this, this study derived four affects related to the panel stiffness from literature and pre-experiment : hardness, deform consistency, thickness and satisfaction and prepared a questionnaire to evaluate the affects of the panel. In the experiment, 54 adults in the age of 20~50 participated and evaluated the affects of hood, front and rear door for nine full size and luxury sedans by pressing the panels with their hands. As results, participants' affect for the panels were significantly different depending on the force-deflection curves of them, and the subjects' satisfaction of the panels increased as the slope of the curve (stiffness) increases. In addition, it was found that the subjects evaluated the panel with the pressing force up to 14kgf. The findings of the study can be used to increase and control the affective quality of exterior panels on passenger cars.

• 소성∙가공
• /
• 제10권4호
• /
• pp.283-293
• /
• 2001

Laser welded tailored blanks(TB) are increasingly used in automotive parts. Among these, TB side panel has forming difficulties in stretch flanging areas such as front and center pillar lower region. To avoid splits in the stretch flanging areas, Proper design of blank shape and drawbeads are essential In this study, the forming simulaton is carried out to investigate the influences of blank shape and drawbeads on stretch flange formability of different thickness TB. And an optimization procedure including the effects of both the blank design and drawbeads is presented. The optimization procedure proposed in this study is expected to be effectively used in blank and die design of TB side panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.294-297
• /
• 2006

Using a single LC panel and two lighting systems, we have developed an advanced LCD system called "Double-Sided LCD." It has only one LC panel and two lighting systems, but it can display images of the same size and resolution on both the front and the rear side. Furthermore, utilizing a simple and thin lighting system we have reduced dramatically its module thickness up to 3.0mm, much thinner than that of conventional dual-type LCD, which is quite appropriate for the use of mobile applications.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1590-1597
• /
• 1994

The aerodynamic analysis of a $6{\times}6$ counter-rotating propfan around a missile-like-body has been completed analytically using a frequency domain panel method. The present method requires Fourier transformation of flow field around the propfan in computing the velocities normal to the propfan lifting surfaces. The aerodynamic performance curve is determined by angle of attack and nonuniform inflow conditions. The inflow conditions result from the variations of missile flight speed, angle of attack, propfan location relative to control surfaces and control surface deflection angle. The two cases of propfan location relative to control surface, front and behind, are analyzed and the aerodynamic results are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.249-250
• /
• 2006

Recently FPD(Flat Panel Display) is used in various field to display enormous information. So cutting technique of flat panel display is needed for producing variety display merchandises. In present, cutting methods of flat panel glass includes breaking process. But this process occurs many glass particles. This glass particles are directly related badness of merchandise and falling productivity. In this paper, to cut front substrate glass of LCD and to get optimized cutting condition are tried fur eliminating breaking process with developed glass cutting machine using a Piezoelectric ceramics actuator. It is known that the vibration of Piezoelectric Ceramic have effect in crack proceeding through the analysis of fracture section.

• 소성∙가공
• /
• 제9권6호
• /
• pp.567-573
• /
• 2000

An analysis system for evaluating the design of dieface of stamping press dies is developed. The die design analysis system interfaced with CATIA via universal or NASTRAN data format provides the design information such as binder-wrap, punch contact status, section length change ratio, wrinkle symptom etc., which are crucial in predicting the defects of initial shape of the sheet in the dieface design stage. The graphic post-processor of developed system which displays 3-dimensional shapes of tool and die and analysis results, helps the interpretation of design evaluation. The dieface design analysis system was tested in draw dies of front floor panel and quarter panel of auto-body in order to verify the usefulness and validity of the system The examples show that the developed system would be a good tool in evaluating dieface designs.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.33-40
• /
• 1998

In recent domestic automotive industry, applications of computer simulation to the manufacturing of stamping dies for inner and outer body panels which greatly affect durability and aesthetic quality of automobiles, have been increased. Enhancement of die quality, and reduction of total die manufacturing time and consequently manufacturing cost are the visible outcome. However, to successfully apply the result of simulation by a commercial package to the die manufacturing, development of an optimal die manufacturing process is required upon the completion of analysis of forte and shortcomings of available sheet metal forming softwares in the market. Based on the results of numerical analysis of front door outer panel forming, this paper evaluates the applicability of simulation results to the real die making for automotive body panels. Also, it attempts to select an optimal die manufacturing process including design, machining and tryout. Lastly, it discusses the expected effects by adopting the selected process in a real stamping die manufacturing facility.

• 한국기계가공학회지
• /
• 제19권4호
• /
• pp.99-104
• /
• 2020

In this study, the temperature distribution and heat transfer characteristics of each component in a solenoid motor system were numerically investigated when heat is generated by the steel pad attached to the solenoid ring of the motor. It was found that the internal airflow was complicated by the inflow velocity of air and the rotation of guide rollers and solenoid rings. Based on the numerical results, the tendency for temperature changes in the steel panel was lower due to the contact of the cooling air in the front in the rotational direction, and the peak temperature was at the front of the center. In particular, it was confirmed that as the air inflow rate was increased, the temperature was reduced due to strong convection. The temperature of the iron plate pad was decreased as the convective heat transfer coefficient was linearly increased with increasing airflow around the solenoid ring. In addition, the temperature of the iron plate panel was rapidly increased with increasing heat generation.

• ETRI Journal
• /
• 제42권6호
• /
• pp.943-950
• /
• 2020

We propose 8.2-GHz band radar RFICs for an 8 × 8 phased-array frequency-modulated continuous-wave receiver developed using 65-nm CMOS technology. This receiver panel is constructed using a multichip solution comprising fabricated 2 × 2 low-noise amplifier phase-shifter (LNA-PS) chips and a 4ch RX front-end chip. The LNA-PS chip has a novel phase-shifter circuit for low-voltage operation, novel active single-to-differential/differential-to-single circuits, and a current-mode combiner to utilize a small area. The LNA-PS chip shows a power gain range of 5 dB to 20 dB per channel with gain control and a single-channel NF of 6.4 dB at maximum gain. The measured result of the chip shows 6-bit phase states with a 0.35° RMS phase error. The input P1 dB of the chip is approximately -27.5 dBm at high gain and is enough to cover the highest input power from the TX-to-RX leakage in the radar system. The gain range of the 4ch RX front-end chip is 9 dB to 30 dB per channel. The LNA-PS chip consumes 82 mA, and the 4ch RX front-end chip consumes 97 mA from a 1.2 V supply voltage. The chip sizes of the 2 × 2 LNA-PS and the 4ch RX front end are 2.39 mm × 1.3 mm and 2.42 mm × 1.62 mm, respectively.