• 설비공학논문집
• /
• 제28권11호
• /
• pp.458-465
• /
• 2016

The purpose of this research is to improve the thermal effiency of solar collector and to quantitatively analyze its performance. Solar thermal systems have been limited to water heating systems mainly using low-temperature range. However, through diverse developments, the application has been extended to medium- and high-temperature fields such as solar heating, solar air conditioning, and solar thermal industrial process. Among the diverse research, this research is specially focusing on enhancement of the thermal performance by minimizing the heat loss coefficient of flat plate solar collectors. In order to do it, a front-side glazing material and a back-side insulation material with high insulated structure is proposed and based on computational analysis, the performance of energy collecting volume of the proposed solar collector is analyzed. The research shows that the proposed structure has the excellent performance at medium- and high-temperature range. therefore, it is expected that the proposed structure can easily replace existing technologies.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1128-1133
• /
• 2019

이 논문에서는 전이 금속 산화물(TMO)층으로 구성된 다층 박막을 사용하는 BIPV(Building Integrated Photovoltaic) 시스템용 전면 컬러 유리를 제안하였다. 몰리브덴 산화물(MoO₃) 및 텅스텐 산화물(WO₃)은 굴절률 차이가 큰 계면을 형성하여 적절한 간섭효과를 얻을 수 있다. 단일 Thermal Evaporator 증착 방법을 통해 다층 박막을 제작함으로써 간단하고 빠르며 저렴한 제조 방법을 제안하였다. MoO₃(60nm)/WO₃(100nm) 다층 박막으로 90% 이상의 광 투과율을 갖는 자홍색 유리를 시연하였으며, 이 기술은 상용화된 BIPV 시스템에 유용할 것으로 기대된다.

• 한국의류학회지
• /
• 제5권2호
• /
• pp.21-33
• /
• 1981

The purpose of this study was to develop a skirt pattern drafting method for korean women between the ages of $18\~24$ on the basis of their physical charcteristics which differs from those of other races in its size and figure. The study procedures and results were as follows; 1. Ten types of convantional skirt patterns were collected and compared to determine the essential measuring items for skirt construction, and to discover what problems are involved. 2. Fourteen items of KIST measurement data were analysed for correlation coefficients, to establish representative items and independent ones. 3. Front waist length and back waist length were additionally measured for supplementary data. 4. A new skirt drafting method was developed based on the results of the pattern comparison and the data analysis. 5. A sensory evaluation was applied to evaluate the new method comparing it with the most widely accepted conventional pattern. An original rating scale was developed for the evaluation and an expert panel consisting of five members judged each shell from 12 subjects by random selection. According to a statistical analysis of the result of the 17 items on the rating scale, 14 items showed significant differences (${\alpha}\leqq$0.01 or ${\alpha}\leqq$0.05) between the two, with the new pattern having better fit. The new pattern drafting method proved to be superior to the conventional one especially in the fitness at the back hip, dart length, side seam balance, and the ease for daily activities.

• 패션비즈니스
• /
• 제24권4호
• /
• pp.1-18
• /
• 2020

The purpose of this study is to identify the design features appropriate for the altered physical characteristics of pregnant women and formulate the direction of future design and development of maternity wear. A Delphi research method based on a panel of experts and pregnant women was used and the survey was conducted to determine the suitability of maternity wear. The survey found that A-line silhouette outerwear with round necklines, with wide sleeves and snap-button fastening on the front with a formal and decent look was considered appropriate as maternity and postpartum wear. Shirts and blouses long enough to cover the hip area to complement women's curvy and full figures, especially around the bust, waist, and hip areas during the later stages of pregnancy were found to be appropriate. Calf-length pleated skirts were comfortable to wear during pregnancy due to the abundant freedom of movement and space offered by pleats. Ankle-length straight leg pants were rated appropriate in terms of comfort and style both during late stages of pregnancy and at work postpartum. Dresses decorated with pleats from the armholes all the way down to the knees were found to provide high levels of comfort at the abdomen, chest, and hips, and considered appropriate. Based on this study results, a follow-up study will be conducted to examine the design of maternity wear during pregnancy as well as at work after pregnancy.

• 한국광학회지
• /
• 제24권5호
• /
• pp.237-244
• /
• 2013

초 다시점 및 전자 홀로그래픽 디스플레이는 향후 기대가 되는 연속시차를 주는 3차원 디스플레이 방식이나, 아직 가용한 디스플레이의 부재로 초기 개발 단계에 있다. 초 다시점의 구현은 다시점 영상의 수 보다는 화소셀/요소 영상내의 화소 수와 화소 사이즈에 의존하며, 전자 홀로그래피도 전체 패널내의 화소 수와 화소 사이즈에 의존하므로 이들의 구현을 위한 요구 사항에는 차이가 없다. 그러나 구현 영상자체는 전자 홀로그래피의 경우는 공간 부양 영상이므로 초 다시점의 패널을 앞뒤로 한 깊이감의 표시보다 시각적인 효과가 더 클 것으로 예상된다.

• Journal of KIEE
• /
• 제11권1호
• /
• pp.41-45
• /
• 2001

The addressing time should be reduced by modifying cell structure and/or driving method in order to replace the dual scan system by single scan and increase the luminance in large ac plasma display panel(PDP). In this paper, the effects of the dielectric layer thickness and the barrier rib height on the addressing time of ac PDP are investigated. It is found out that the addressing time was decreased with decreasing thickness of dielectric layer on the front glass and thickness of white dielectric layer on the rear glass. The decreasing rate were 160ns/10${\mu}{\textrm}{m}$ and 270nsd/10${\mu}{\textrm}{m}$, respectively. Also in case of decreasing the height of barrier rib, addressing time was decreased at the rate of 550ns/10${\mu}m$.

• 한국전자통신학회논문지
• /
• 제13권5호
• /
• pp.1101-1108
• /
• 2018

본 연구는 디바이스 와 앱 처리, 게이트웨이 기능 처리, 그리고 애플리케이션 과 서비스 기능이 협력되어 처리되는 플랫폼 부분의 스쿨존 안전 시스템 연구다. 디바이스 부분은 스쿨존에서 학생이 이동할 때 지원되는 비콘들 이다. 그리고 앱 부분은 스마트폰에 적용되는 통학 알림이 서비스다. 마지막으로 어린이 보호 구역 표지판은 게이트웨이에 등록된 학생들의 숫자가 표시된다. 게이트웨이는 두 가지 형태로 운영된다. 첫 번째 형태는 초등학교 학생들의 이동 상황을 파악하기 위해서 설치된 게이트웨이이다. 그리고 두 번째 형태는 학교 정문을 통과한 학생을 확인하기 위한 게이트웨이 이다. IoT 플랫폼은 다양한 서비스 기능 과 어린이 보호구역 판넬 지원 그리고 학생 카운터 처리 기능들을 처리 한다.

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5963-5973
• /
• 2011

현재 사용되고 있는 소일네일링 구조물에 관한 설계 및 해석법들은 실내모형실험이나 원형실험 또는 수치해석 결과를 바탕으로 주변지반과 보강네일 사이의 상호작용 메카니즘을 달리 적용함으로서 서로 다른 안전율을 제시하고 있다. 이러한 해석법들은 네일의 강성도나 지반조건 등이 가정된 바와 같이 잘 일치할 경우에는 합리적인 설계법이 될 수 있다. 하지만 이와 조건이 다른 경우 부적절한 결과를 가져올 가능성이 크다. 따라서, 본 연구에서는 원심모형시험기를 사용하여 소일네일링 구조물의 거동과 파괴메카니즘에 관한 매개변수적 실험을 실시하였다. 매개변수적 실험에서는 네일의 길이 및 설치각, 네일과 전면판의 강성도 등을 다양하게 변화시키면서 모형 벽체가 파괴될 때까지 중력수준을 증가시키는 자중실험을 실시하였다. 실험으로부터 얻어진 결과를 바탕으로 매개변수의 변화에 따른 영향, 파괴메카니즘 등을 비교분석하였다. 원심모형실험 결과와 현재 사용되고 있는 방법들과 비교 검토함으로서 기존 방법들에 대한 타당성을 검증하였다.

• 패션비즈니스
• /
• 제25권3호
• /
• pp.71-89
• /
• 2021

The purpose of this study was to design posture braces for rounded shoulders by examining characteristics of incorrect postures of rounded shoulders. The review of information in literature on rounded shoulder postures, correction exercise methods, and posture correction devices, has prompted this study to determine the design and material of a proper posture brace for rounded shoulders. In order to develop the pattern of a posture brace for rounded shoulders for women, the study carried out a comfort evaluation of the braces based on the 2D patterns through drafting method by utilizing the body measurements and relational formulae associated with the major body measurement such as bust circumference and on the 3D patterns of the brace which were obtained from 3D human model of women in their early 20s in Korea. Differences in angles were noted when 2D and 3D patterns of shoulder posture braces were compared. The side neck point was relocated farther outside in the 3D pattern to allow additional flexibility in the back-neck area, and the shoulder band was lowered by 14.8°, increasing armhole area comfort. The upper hemline of the front panel was found to rotate upward at an angle of 22.0° as the underarm point of the 3D pattern moved upwards than the underarm point of the 2D pattern, which enhanced comfort in the abdomen area. The 3D designs of shoulder posture brace was preferred in this study, as they significantly improved comfort while conducting fit evaluation compared to the 2D patterns of shoulder posture brace.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.480-487
• /
• 2019

This study used 3D technology to develop a multi-functional sports brassiere with increased comfort and fit that can be worn as a base layer during exercise or as underwear. A 75A size industrial lingerie figure was used to develop a standard pattern. 3D tools for scanning and pattern making, such as Vivid 910, Geomagic Design X, 2C-AN and Yuka CAD were used. The sports brassiere was designed as a tank top style with dual structure and linings attached to a pad utilized with a sport brassiere mold cup. 3D outer and lining's pattern was differently developed in consideration of the body's curvature with pad's shape and structure. Shoulder and neck part reduction rates were adjusted to increase the neck areas fit that considered the nude pattern's structure due to uncomfortableness felt by wearers who were uncomfortable with the neck areas fit on existing brand products. The reduction rate was also set differently on each part. For example, the reduction rate on outer side panel was set strongly to increase the breast's volume. Two products, developed by a 3D sports brassiere and previously released product, were worn on 8 subjects in their 20's to evaluate fit, comfort, and purchase preferences. The evaluation proved that newly developed 3D products were superior to comparative products. The results of the clothing pressure measurement indicate that the newly developed sports brassiere's front part had less pressure on upper bust and shoulder areas compared to comparative products as well as showed less pressure on the back side, which shows improved wearing comfort compared to comparative products.