• 대한가정학회지
• /
• 제31권4호
• /
• pp.209-214
• /
• 1993

The purpose of this study is to provide the fundamental data for a dummy design used I read-made clothing and underwear production I terms of a pattern of breast types based o their morphological characteristics in accordance with different pattern of breast types. The breast's side and frontal views of the breast were measured with 90 junior high school girls of age between 13 and 16 residing in the urban area of Seoul using the plan photogrammetry. 1. The correlation between the side view body measurement and the breast's side and front view were analyzed by using the canonical correlation analysis, whereby the side view body measurement is showing a 39% of the breast's side view and frontal view. 2. The breast's side and front view has been classified by cluster analysis. The results of custer analysis for the breast's side and front view would be turned out the four cluster. 1) The cluster Ⅰ, The most volumed breast's side view.(20%) 2) The cluster Ⅱ, The fastest growing breast's front view.(38%) 3) The cluster Ⅲ, the latest growing breast.(3%) 4) The cluster Ⅳ, the middle degree growing breast.(39%)

• 대한인간공학회지
• /
• 제22권1호
• /
• pp.17-29
• /
• 2003

This study was initiated to develop a methodology for devising Korean virtual models for apparel shopping at internet shopping site. The data base for this study was the Korean National Anthropometric Survey in 1997. The subjects were 493 women and 626 men in 20's. The researchers also measured 88 males and females in age 20's to suggest back and front depth proportions which are not available from the survey. The virtual models' figure types were classified by the heights, drop value and bust(chest) girth. It was evaluated whether it is needed to separate figure type with bust(chest) girth. The body sizes of virtual models were suggested for side view model and front view model in 13cm height. Four female virtual models were suggested for front view and side view. Eight male virtual models were suggested for front view and side view. Each virtual model's height, breadth and depth proportions were calculated. Shoulder breadth. Bust(chest) breadth, waist breadth, hip breadth and proportions were calculated for front view model. The bust(chest) depth, waist depth, abdomen depth, hip depth and proportions were calculated for side view model. Height proportions were suggested for female and male virtual models.

• 한국의류학회지
• /
• 제26권10호
• /
• pp.1443-1454
• /
• 2002

The purposes of this study were to classify body type of adult males into several kind of shape and to provide the characteristics of size of each group which has same shape. As the sample, subjects were 1290 males of 20 to 54 year-old. The procedure and results were follows; 1. As the result of the previous reserch, the front line of body was classified in X, H, Y and A types. 2. The principal component analysis was used to obtain the shape factor of the side line of the trunk. 9 factors in the side were extracted. As the result of the cluster analysis of factor scores, the side line of body was classified in 5 types. It was named X, A, Y and H type in the front and S, D1, d, I and D2 type in the side. 3. In order to consider the shape of body as a whole, the body shape of the front and side were compounded. The whole body shapes of adult male were very various, and 6 body shapes, XS, YS, Yd, YI, AD2 and HD1 were selected as the basic types. In each type of body, several groups were classified by size factor, height and chest girth and master size was selected considering appearance frequency.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.51-58
• /
• 2001

The use of tailor welded blanks (TWB) in automotive applications is increasing due to the potential of weight and cost saving. The object of this study is development of the front side member by static analysis and crash simulations. Accord-ing to the results , energy absorption and barrier force is very important parameter to control passenger safety and deforma-tion shape. A energy absorbability point of view, tailor welded blanks is most effective to absorb energy than non-twb. Non-TWB front side member and TWB applied front side member were simulated. It shows reduce stmping parts weight reduction and cost down.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.27-38
• /
• 2002

This research was to study somatotype characteristics of elderly women and to classify them based on the results. It also analyzed the age distribution of the classified types, and the frequency among the age groups. The subjects of the study were 331 women of the age of 55 fears or older. They were measured on the performing anthropometric and photographic measurements. The samples were classified into 4 different types, and the photographic measure of each front and side view also clustered 4 different types. The results of the research are as follows : The somatotype of elderly women in Korea is most likely to be H-shaped, which shows a slight refraction when viewed from a front. When viewed from a side, an appearance off straight somatotype is common among the age of 70 or younger. However, the age of 70 or older appears to have swayback somatotype. This means that women are likely to reserve their straight body figure from their middle-age until the age of 70. The major somatotype characteristic of old age, a stooped body shape, is more frequently seen as they get older.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1558-1563
• /
• 2004

A measurement technique for the void fraction and the bubble dynamics in gas-liquid two-phase flows has been proposed using a time-resolved two-phase PIV system. For the three-dimensional evaluation of the bubble information, both the images from the front and side views are simultaneously recorded into a high speed CCD camera by reflecting the side image into the front view with the help of a $45^{\circ}$ oriented mirror. Then, a stereo-matching technique is applied to calculate the void fraction, bubble size and shape. To obtain the rising bubble velocities, the 2-frame PTV method was applied. Consequently, the present technique shows good feasibility for the measurements of the volume fractions, mean diameters, aspect ratios and velocities of the bubbles at the three-dimensional point of view.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.15-26
• /
• 2002

The purpose of this study was to classier the somatotype of late middle-aged women and to analyze the characteristics of each somatotype. The subjects were 337 late middle-aged women and their age range os from 45 to 59 fears old. Data were collected through anthropometry and photometry and analyzed by factor analysis, cluster analysis and discriminant analysis. The results were as follows; 1. The result of factor analysis indicated that 9 factors were extracted through factor analysis and those factors comprised 83.56 percent of total valiance. 2. Using factor scores, cluster analysis was carried out and the subject were classified into 4 cluster. Each cluster was classified as their body front and side view contour. Type 1 is tall, slim, and lower balk is flat on the side. Type 2 is standard and lean-back type on the side. Type 3 is standard height and weight, H type in front, and belly-protruded on the side. Type 4 is short, fat, and the side is hip-protruded. 3. According to the stepwise discriminant analysis, the 9 important items in classifying the somatotype of the late middle-aged women are as follows ; lower back tilt angle, hip depth(back) -back waist depth(back), bust depth(fore) - anterior waist depth(fore), jugular fossa point(fore), upper back tilt angle, burst breadth -waist breadth, right shoulder tilt, height of shoulder - height of anterior waist, abdomen breath. The correct classification rate for these items is as exact as 84.62%.

• 대한기계학회논문집B
• /
• 제31권11호
• /
• pp.904-911
• /
• 2007

A measurement technique fur void fraction has been proposed using a time-resolved two-phase PIV system and the bubble dynamics has been investigated in gas-liquid two-phase flows. For the three-dimensional evaluation of the bubble information, both the images from the front and side views are simultaneously recorded into a high speed CCD camera by reflecting the side view image on a $45^{\circ}$ oriented mirror to be juxtaposed with the front view image. Then, a stereo-matching technique is applied to calculate the void fraction, bubble size and shape. To obtain the rising bubble velocities, the 2-frame PTV method was adopted. The present technique is applied to freely rising bubby flows in stagnant liquid. The results show that the increase of bubble flow rate gives rise to the increase of bubble size and rising velocity at first. If it goes over a certain level, the rising velocity becomes constant and the horizontal velocity grows bigger instead due to the obstruction of other bubbles.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1470-1481
• /
• 2004

The purpose of this study was to research on facial shape to suggest a quantified data for the domestic apparel and beauty industry. Conducted a measurement research of 278 female college students, We took the photographs of front view and lateral view of the subjects by digital camera and obtained the 69 measurements through the facial measurement program. 264 ,subjects' measurement data were analyzed by various statistical methods such as descriptive analysis, factor analysis and cluster analysis. Using the 69 measurement items,4 factors were selected as key factors for the factor analysis of facial shape, the factors are: \circled1 Front face height \circled2 Side face radial length \circled3 Front face breadth \circled4 Ear height and Gnathion radial length. We categorized the facial shape into four types by cluster analysis. Type 4 is the most common facial shape in female college students: \circled1 Type 1: Round face \circled2 Type 2: Oval face \circled3 Type 3: Square face \circled4 Type 4: Heart shaped face According to the facial shape analysis, facial shape of female college students are consisting of Heart shaped face(34.8%), Round face(29.2%), Square face(23.5%), oval face(12.5%).

• 복식
• /
• 제54권2호
• /
• pp.149-165
• /
• 2004

In this study, the photographic and anthropometric measurements of men in the 20's were made. and pattern making professionals visually evaluated their side photos to classify lateral views. These data were analyzed by being compared with existing research results to select objective standards, and body types were classified according to the selected standard. In addition, body features were defined according to lateral views based on measurement items and indices, and standard lines and determining factors for visual evaluation which determines lateral views were revealed. Back length - front length size smaller than 1.5cm was named as the lean-back type, 1.5∼3.9cm was named as the straight type. and that larger than 3.9cm was named as the bend-forward type. In the straight type, the bisection point of waist depth was located at a similar place to tragion level vertical line. In the lean-back type, the point was at the front of tragion level vertical line. In the bend-forward type, the point was at the back of tragion level vertical line.