• Interaction and multiscale mechanics
• /
• 제4권1호
• /
• pp.1-16
• /
• 2011

The inverse problem about the theoretical analysis of a drill string bending in a channel of an inclined bore-hole with localized geometrical imperfections is studied. The system of ordinary differential equations is first derived based on the theory of curvilinear flexible elastic rods. One can then use these equations to investigate the quasi-static effects of the drill string bending that may occur in the process of raising, lowering and rotation of the string inside the bore-hole. The method for numerical solution of the constructed equations is described. With the proposed method, the phenomenon of the drill column movement, its contact interaction with the bore-hole surface, and the frictional seizure can be simulated for different combinations of velocities, directions of rotation and axial motion of the string. Geometrical imperfections in the shape of localized smoothed breaks of the bore-hole axis line are considered. Some numerical examples are presented to illustrate the applicability of the method proposed.

• Tribology and Lubricants
• /
• 제27권2호
• /
• pp.65-70
• /
• 2011

The power servo cylinder for driving accurately turbine stop valve of an atomic power plant is necessary to do turn-over owing to a leakage of oil and a structure problem, especially, it of a power plant be in demand a high quality standard depends entirely on import. There are much problem that the AlBC be to used as a material of piston head in cylinder are caused by wear. Therefore, it is necessary to examine friction characteristics of it. In this study, wear test experiments was carried out with AlBC and SCM440, using reciprocating friction tester of pin on disk. This result was shown that the wear mechanism of AlBC on working condition is adhesive wear and the maximum temperature of infra redray thermal image of frictional surface show over 2 mm from contact surface of pin and disk.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.687-695
• /
• 2007

Statement of problem: The proper contact relation between adjacent teeth in each arch plays an important role in the stability and maintenance of the integrity of the dental arches. Proximal contact has been defined as the area of a tooth that is in close association, connection, or touch with an adjacent tooth in the same arch. Purpose: The aim of this study was to develop a digital device for measuring the proximal tooth contact tightness by pulling a thin stainless steel strip (2mm wide, 0.03mm thick) inserted between proximal tooth contact. Material and method: This device consists of measuring part, sensor part, motor part and body part. The stainless steel strip was connected to a stain gauge. The strain gauge was designed to convert the frictional force into a compressive force. This compressive force was detected as a electrical signal and the electrical signal was digitalized by a A/D converter. The digital signals were displayed by a micro-processor. The pulling speed was 8mm/s. Results: For testing reliability of the device in vivo, two healthy young adults (A, B) participated in this experiment. The tightness of proximal tooth contact between the second premolar and the first molar of mandible (subject A) and maxilla (subject B) was measured fifteen times for three days at rest. We double-checked the accuracy of the device with a Universal Testing Machine. Output signals from the Universal Testing Machine and the measuring device were compared. Regression analysis showed high linearity between these two signals. In vivo test, no significant differences were found between measurements. Conclusion: This device has shown to he capable of producing reliable and reproducible results in measuring proximal tooth contact. Therefore, it was considered that this device was appropriate to apply clinically.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.11-18
• /
• 2013

This paper presents the plastic inhomogeneous deformation behavior of bimetal composite rods during the axisymmetric and steady-state extrusion process through a conical die. The rigid-plastic FE model considering frictional contact problem was used to analyze the co-extrusion process with material combinations of Cu/Al. Different cases of initial geometry shape for composite material were simulated under different conditions of co-extrusion process, which includes the interference and frictional conditions. The main design parameters influencing on deformation pattern are diameter ratio of the composite components and semi-die angle. Efforts are focused on the deformation patterns, velocity gradient, predicted forming load and the end distance through the various simulations. Simulation results indicate that there is an obvious difference of forming pattern with various diameter ratio and semi-die angle. The analysis in this paper is concentrated on the evaluation of the design parameters on the deformation pattern of composite rod.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.553-560
• /
• 2008

STATEMENT OF PROBLEM: Proximal contact plays an important role in the stability and maintenance of the integrity of the dental arches. However, it is difficult to evaluate quantitatively the tightness of proximal tooth contact (TPTC). PURPOSE: The aim of this study was to measure the TPTC in permanent dentition. MATERIAL AND METHODS: Ten young adult volunteers with healthy dentition participated in this experiment. The TPTC between the teeth of both the maxilla and the mandible was measured at rest state by a novel device which records the TPTC by pulling of a stainless steel strip (0.03 mm thick) using the electric motor. One-way ANOVA test was used to compare the values in all measured area. When a statistically significant difference was calculated, Bonferroni correction was applied. Independent samples t-test was used to compare the values in male and female. RESULTS: The lowest TPTC and the highest TPTC was measured between the lower central incisors (0.87 ${\pm}$ 0.20 N), and between the lower left first molar and second molar (1.99 ${\pm}$ 0.68 N), respectively. All TPTC per quadrant demonstrated a similar pattern of a continuous increased gradient in an anterior-posterior direction. There are no significant difference between the maxilla and mandible. CONCLUSION: The TPTC was measured quantitatively by a novel device and decreased progressively in a posterior-anterior direction.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.95-102
• /
• 2007

A feeding system is a key component in manufacturing packing boxes such as printing, slotting and gluing. The role of the feeding system is to feed corrugate cardboards which is usually tick and large. So, a special method is necessary to feed corrugate cardboards. This paper suggests a concept and an automatic feeding machine to feed corrugated cardboards using TRIZ, the theory of inventive problem solving. The automatic feeding machine consists of units to regulate the machine according to length and width of corrugated cardboards, a feeding part with a plurality of small rollers, and a sucking part which intensify frictional force between rollers and the lowest feeding cardboard. In particular, the feeding part is composed of an up-and-down motion plate with holes to suck the lowest corrugated cardboard as well as small rolling rollers after stopping in a moment. Thus this machine does not sensitive to size of corrugated cardboards and also can keep feeding accuracy during feeding fast.

• 한국전자통신학회논문지
• /
• 제13권6호
• /
• pp.1235-1242
• /
• 2018

풍속이 급변할 경우 전력계통 시스템과 기계시스템의 안전을 위해 풍력발전기를 제동시킨다. 이 때, 풍력발전기 내부의 기어박스에서 기어 이의 접촉하중으로 인한 기어의 손상 및 파손이 발생하며, 브레이크를 이용한 제동 시 블레이드의 동력을 그대로 전달받아 마찰열 상승, 브레이크의 성능 저하 등의 문제가 있다. 본 논문은 풍력 발전 시스템의 동력전달장치인 기계식 기어의 접촉에 의한 문제를 해결하기 위해 동력 차단 시스템을 결합시킨 하이브리드 마그네틱 기어의 형상을 제안한다. 이차원 유한해석법을 활용하여 하이브리드 마그네틱 기어의 형상에 따른 토크와 손실 분석을 통해 풍력발전 시스템에 적합한 하이브리드 마그네틱 기어의 형상을 도출하였다.