• Title/Summary/Keyword: frequency-response

Search Result 5,570, Processing Time 0.035 seconds

Fast(submillisecond) Switching of Nematic Liquid Crystals and Effects of Dielectric Dispersion; Theory and Experiment

  • Shiyanovskii, Sergij V.;Golovin, Andrii B.;Yin, Ye;Lavrentovich, Oleg D.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2005.07a
    • /
    • pp.181-186
    • /
    • 2005
  • We demonstrate that the finite rate of dielectric relaxation in liquid crystals which has been ignored previously causes profound effects in the fast dielectric reorientation of the director. The phenomenon is relevant for submillisecond switching of the director when the switching rate approaches the rate of dielectric relaxation through the reorientation of the molecular dipoles. A submillisecond switching ($15-400\;{\mu}s$ for an optical retardation shift $0.3-2.2\;{\mu}m$ in $10-15\;{\mu}m$ thick cells) is demonstrated for dual frequency nematic cells with high pretilt that maximizes the dielectric torque acting on the director. We propose the theory of dielectric response in which the electric displacement depends not only on the present (as in the standard theory) but also on the past values of electric field and director. We design an experiment in which the standard "instantaneous" model and our model predict effects of opposite signs; the experimental data support the latter model.

  • PDF

Investigation of discharge characteristic of Shadow Mask PDP

  • Tu, Yan;Wang, Baoping;Zhang, Xiong;Yang, Zhang;Zhang, Jian;Cui, Wei
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2005.07a
    • /
    • pp.243-246
    • /
    • 2005
  • The discharge characteristic of a novel AC PDP with Shadow mask (SM-PDP) has been studied with 2-D and 3-D simulations. Compared with the conventional coplanar PDP, the SM-PDP has lower ignition voltage, higher response frequency and higher brightness. It's easy to realize a high definition display while keeping a good performance with the SM-PDP. The discharge process as measured with a fast Intensified CCD (ICCD) compares favorably with the simulation results.

  • PDF

Identification of control system of No.1 Plate Mill in POSCO (포항제철(浦項製鐵) 1후판(厚板) 압연(壓延) ROLL 구동계(驅動係)의 식별(識別)에 관(關)한 연구(硏究))

  • Jeong, Ho-Seong;Kang, Myung-Jo
    • Proceedings of the KIEE Conference
    • /
    • 1987.11a
    • /
    • pp.147-149
    • /
    • 1987
  • On the colling mill plant, the qulity of products depends on the ability to follow up the command of roll speed and the magnitude of impact drop. In this paper, the frequency response method is applied to the main motor system of No.1 Plate Mill Plant in POSCO. This paper show the influences when the pseudo random noise as test signal is applied to the system to be measured and presents the proper magnitude of test signal.

  • PDF

MODELING OF PRESSURE CONTROL SYSTEM OF BOILER (보일러 풍압 제어 계통의 모델링)

  • Park, Min-Ho;Mok, Hyung-Soo
    • Proceedings of the KIEE Conference
    • /
    • 1987.11a
    • /
    • pp.362-366
    • /
    • 1987
  • The amount of inflowing Air into the boiler has controlled by manipulating the opening of valve, damper and vane, as fan operated by induction motor operats at constant speed, but these control methods are not efficient. Thus VVVf(Variable Voltage Variable Frequency) control of fan has selected to improve efficiency and to acquire power savings. Control system of Air Flow is affected by nonlinearity caused by load variation, vane opening, etc. The analysis of control parameter causing nonlinearity is needed to acquire optimal control and excellent transient response. This paper provides modeling of boiler with various load conditions and vane opening, and analysis of this system.

  • PDF

POSITION CONTROL OF D.C. SERVO MOTOR USING VARIABLE STRUCTURE WITH SLIDING MODE (슬라이딩 모드에 의한 직류 서브 모터의 위치 제어)

  • Lee, Yoon-Jong;Yuhn, Hyeong-Deok
    • Proceedings of the KIEE Conference
    • /
    • 1987.11a
    • /
    • pp.552-554
    • /
    • 1987
  • A design principles of discontinuous control are studied and then are applied to position control of D. C. sevo drive fed by a four-quadrant chopper. Variable structure control with sliding mode gives fast dynamic response with no overshoot. And the resulting system bas good robust properties independent of the wide variations of electrical, mechanical parameters and external disturbances without any system identification. But the high frequency chatter component of control input in the sliding mode is undesirarable. A continuous control law that is a approximation to discontinuous control law is used for design.

  • PDF

Development of the 300kVA Large Capacity IGBT UPS (IGBT를 적용한 300kVA급 대용량 무정전전원장치 개발)

  • Byun, Y.B.;Kim, T.J.;Joe, K.Y.;Park, S.J.;Kim, C.U.
    • Proceedings of the KIEE Conference
    • /
    • 1998.07f
    • /
    • pp.2057-2059
    • /
    • 1998
  • In order to maintain a high quality output voltage, conventional UPS systems use complex filters with large passive components. To overcome this drawback, real time feedback control schemes have been invested. However, these techniques require a high inverter switching frequency to dynamically adapt to changing load conditions reduce harmonics of the output voltage, thereby rendering the system inadequate for high power applications. This paper presents real time digital signal processor(DSP) control of a large capacity UPS system feeding nonlinear loads to provide a sinusoidal inverter output voltage, unity input power factor, low bus voltage ripple, and excellent transient response.

  • PDF

Optimal Design to reduce Acoustic Noise in Interior Permanent Magnet Motor (매입형 영구자석 전동기의 소음 저감을 위한 최적 설계)

  • Lee, Sang-Ho;Lee, Suk-Hee;Hong, Jung-Pyo;Hwang, Sang-Moon;Kim, Young-Kyoun
    • Proceedings of the KIEE Conference
    • /
    • 2006.07b
    • /
    • pp.851-852
    • /
    • 2006
  • This paper presents methods to reduce acoustic noise in interior permanent magnet (IPM) motor. Mechanical and magnetic sources are considered to reduce noise of the machine, and structural and electromagnetic designs are performed. In the structural design to reduce mechanical source, the structural resonances are moved to higher frequency for enhancement of stiffness. Then, the electromagnetic design to reduce magnetic source, the amplitudes of magnetic force harmonics are reduced by using objective function of response surface methodology (RSM). The validity of the design process and objective functions is confirmed with their calculated and experimental results.

  • PDF

A Basic Study for the Control Circuit of 2-phase 8-pole HB type Linear Pulse Motor (2상 8극 HB형 리니어펄스모터의 제어회로구성을 위한 기초연구)

  • Kim, Sung-Hun;Kim, Il-Jung;Lee, Eun-Woong
    • Proceedings of the KIEE Conference
    • /
    • 1994.07a
    • /
    • pp.135-137
    • /
    • 1994
  • In this paper, step response, speed, maximum frequency characteristics of 2-phase, 8-pole, HB type, prototype linear pulse motor(LPM) were investigated with the open loop control system(OLCS) being attached to the LPH. In this experiment, both 1-phase and 1-2 phase excitation types were adopted and microcomputer was used in deal with the data. The results point to some directions for the improvement of the open loop control system.

  • PDF

A Study on the Design of Multiplierless FIR Filters (승산기를 사용하지 않는 FIR필터의 설계에 관한 연구)

  • 신재호;이종옥
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.22 no.3
    • /
    • pp.16-22
    • /
    • 1985
  • In this paper a new algorithm named modified delta modulation (MDM) for encoding filter coefficients is proposed. And this paper presents the designing method of multiplier less FIR filters rosin영 Proposed MDM a19orithm. In the delta modulation (DM) system the quantiaation levels consist of two levels $\pm$1, but in newly proposed MDM algorithm quantization levels are extended to many levels 0, $\pm$2$^n$, n=0, 1, 2... It is recognized by the result of computer simulations that frequency response of multi-plierless FIR filters designed by MDM algorithm is relatively good. And comparing with con-ventional FIR filters on the number of hardware devices, this filter needs a little increased memory, but regardless of filter order it needs only one multiplier which is used for signal scaling.

  • PDF

Active RC Filter (능동 RC 여파기)

  • 이흥구;이문기
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.7 no.1
    • /
    • pp.9-17
    • /
    • 1970
  • The paper presents pole optimization in RC network of active RC filter using current inversion negative impedance converter. And also empais is placed on improving the stability of the active RC filter. Experimental results obtained with active RC low pass filter, having Chebyshev 2nd order response and modular angle 55$^{\circ}$, cutoff frequency 3.4KC, are shown and compared with theoretical curves.

  • PDF