• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.678-683
• /
• 1998

Combustion instability by thermoacoustic feedback incite strong low frequency noise and vibration which damage the system and provoke the environmental problems. Therefore, it is necessary to control the thermoacoustic oscillation. In the way of controlling the instability, active control method using adaptive algorithm is applied. In this study, active noise control method using anti-sound technique is selected, whose principle is cancelling the noise with the addition of opposite phase sound. At first, simulation is performed to confirm the stability of controller, and after that control of combustion instability is carried out to get cancellation of 20-30dB SPL.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.80-84
• /
• 2008

In this paper, we have posed contactless power supply method using the contactless transformer with multiple primary winding. Also, the system uses resonant frequency tracking method for safe power supply at the elevator's car. The proposed system has been verified by the simulation using ICA4 and Maxwell. The contactless power transmission system is designed for 5[kW] rate.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.563-568
• /
• 1999

Generally the control method of wire feeding motor in welding machine has been used full-wave phase control method. The fire-angle control generates low frequency speed ripple, and it causes the output current ripple. So it results in the variation of welding condition and low welding performances such as spatter generation and bead state. For the purpose of welding performances improvement by speed controller in wire feeding motor, in this paper the constant speed control method for welding machine is proposed. The proposed system is composed of speed control loop and current control loop. As a result of experiment by using proposed constant wire feed experiment by using proposed constant wire feed speed controller, the output voltage and current waveform and metal transfer are maintained stably. And moreover the number of instantaneous short circuit occurrence is reduced remarkably.

• Structural Engineering and Mechanics
• /
• v.75 no.2
• /
• pp.239-246
• /
• 2020

In this paper, a novel analytical method, Max-Min Approach (MMA), has been presented and applied to consider the nonlinear vibration of dry cask storage systems. The nonlinear governing equation of the structure has been developed using the shell theory. The MMA results are compared with numerical solutions derived by Runge-Kutta's Method (RKM). The results indicate a satisfying agreement between MMA and numerical solutions. Parametric studies have been conducted on the nonlinear frequency of dry casks. The phase-plan of the problem is also presented and discussed. The proposed approach can potentially ca be extended to highly nonlinear problems.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.123-126
• /
• 1995

The waveform coding are concerned with simply preserving the wave shape of speech signal through a redundancy reduction process. In the case of speech synthesis, the wave form coding with high quality are mainly used to the synthesis by analysis. However, because the parameters of this coding are not classified as either excitation and vocal tract parameters, it is difficult to applying the waveform coding to the synthesis by rule. In this paper, we proposed a new pitch alteration method that can change the pitch period in waveform coding by using scaling the time-axis and compensating the spectrum. This is a time-frequency domain method that is preserved in the phase components of the waveform and that has a little spectrum distortion with 2.5% and less for 50% pitch change.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1382-1390
• /
• 2017

This paper presents a power supply for gate drivers, which uses a magnetic resonance wireless power transfer system. Unlike other methods where multiple antennas are used to supply power for the gate drivers, the proposed method uses a single antenna in an insulated receiver to make multiple mutually isolated power supplies. The power transmitted via single antenna is distributed to multiple power supplies for gate drivers through resonant capacitors connected in parallel that also block DC bias. This approach has many advantages over other methods, where each gate driver needs to be supplied with power using multiple receiver antennas. The proposed method will therefore lead to a reduction in production costs and circuit area. Because the proposed circuit uses a high resonance frequency of 6.78 MHz, it is possible to implement a transmitter and a receiver using a small-sized spiral printed-circuit-board-type antenna. This paper used a single phase-leg circuit configuration to experimentally verify the performance characteristics of the proposed method.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.113-121
• /
• 2013

This paper introduces a simple core loss calculation method for output filter inductor in pulse width modulation (PWM) DC-AC inverter. Amorphous C-core (AMCC-320) is used to analyze the core loss. In order to measure core loss of the output filter inductor and validate the proposed method, a single-phase half-bridge inverter and a calorimeter are used. By changing switching frequency and modulation index (MI) of the inverter, core loss of the AMCC-320 is measured with the lab-made calorimeter and the results are compared with calculated core loss. The proposed method can be easily extended to other core loss calculation of various converters.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.235-239
• /
• 1999

This thesis is concerned with the development of useful engineering techniques to detect and analyze nonlinearities in mechanical systems. The methods developed are based on the concepts of higher order spectra, in particular the bispectrum. The study of higher order statistics has been dominated by work on the bispectrum. The bispectrum can be viewed as a decomposition of the third moment(skewness) of a signal over frequency and as such is blind to symmetric nonlinearities. Initially auto higher order spectra are studied in detail with particular attention being paid to normalization method. Traditional method based on the bicoherence are studied. Under certain conditions, notably narrow band signals, the above normalization method is shown to fail and so a new technique based on prewhitening the signal in the time domain is developed.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.199-203
• /
• 1997

Fine displacement of spherical suface was detected and analyzed by Twyman-Green interferometer and the interferogram analysis using Fourier transform method. The surface profile was obtained from single interferogram by introducing the carrier freguency to the interferogram. The interferogram was processed in the spatial frequency domain by fast Fourier transform, and the phase distribution was obtained by inverse Fourier transform. The 3-dimensional distribution for the surface displacement was obtained. It was compared with the calculated surface displacement and the error was less than λ/10.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.369-371
• /
• 2004

With the proliferation of nonlinear loads, high neutral harmonic currents in three-phase four-wire distribution system have been observed. It has been. known that the ground impedance has an effect on the neutral currents of a system which operates with harmonics present. On-site measurements of harmonic currents and voltages according to the fell-of-potential method under case study system were made and the ground impedance modeling using the pattern search method for the harmonic analysis was developed. The ground impedance model obtained by the proposed method was compared with the frequency characteristics by field tests and has shown appropriate results, and would be applicable to evaluate the harmonic and transient response characteristics of the ground system.