• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.407-412
• /
• 2014

In this paper, we propose an underwater acoustic communication of FH-MFSK(Frequency-Hopped Multiple Frequency Shift Keying) system with multiple orthogonal property. Generally, the processing of FSK(Frequency Shift Keying) method is simple, but it is vulnerable to ISI (Inter-Symbol Interference) caused by multipath transmission. In this paper, the orthogonal codes are generated with the same number of transmitting symbols, and these codes are corresponding to multiple frequencies. We used m-sequence to generate multiple orthogonal codes. We compared the performance of proposed method with conventional MFSK method via the experiment. As a result, we confirmed that the proposed method shows 6~10 % lower error rate at 100 bps than conventional method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.97-103
• /
• 2014

Signal processing technique of linear frequency modulation-frequency shift keying (LFM-FSK) waveform has been introduced for rear view radars of an automobile. LFM-FSK waveform consists of two sequential stepped frequency waveforms with some frequency offset, and thus, can be used to generate inverse synthetic aperture radar (ISAR) images of rear view target of an automobile. However, ISAR images can often be blurred due to inter-pulse phase errors. To resolve this problem, one-dimensional (1-D) entropies of high resolution range profiles (HRRP) are minimized with the help of particle swarm optimization (PSO). The searching space used in PSO is adaptively adjusted by the use of information on the target's velocity obtained from LFM-FSK waveforms. Simulation results show that the proposed method can generate well-focused ISAR images.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.218-226
• /
• 2022

The main characteristics of the underwater acoustic channel have varying multipath and fast fading. Especially, Frequency Shift Keying (FSK) signals with multiple frequency bands caused loss of information bits allocated on the specific frequencies due to selective fading phenomenon. Therefore, this paper proposes frequency gain control algorithm based on preamble error rates. The proposed algorithm estimates optimal gain value in the range of preamble error rate with less than 10 % for specific faded frequency. By employing turbo equalized FSK signals with rate of 1/3, the experiment was conducted on a lake in Munkyeong city with distance of 300 m to 500 m. The result confirms that packets are decoded successfully by applying proposed algorithm as increasing number of iterations.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.258-261
• /
• 2000

In this paper, the design of Binary FSK Using Cellular Oscillator Network architecture is newly introduced and analyzed. With its easy frequency controllability and MHz range of quadrature signals, the Cellular Oscillator Network can be used in RF communication systems. Binary Frequency Shift Keying can also be implemented through digital loop-path switching. This FSK model is simulated and proved with typical 3V, 0.5$\mu\textrm{m}$ CMOS N-well process parameters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.203-206
• /
• 2008

기존의 대표적인 디지털 통신방식으로 주파수 편이 변조(FSK: frequency shift keying), 위상 편이 변조(PSK: phase shift keying), 진폭 편이 변조(ASK: amplitude shift keying) 방식들이 있다. 본 논문에서는 2진 정합필터를 이용하여 웨이브릿 편이변조 신호를 복원하는 알고리즘을 제안한다. 웨이브릿 편이 변조 시스템은 스케일링 함수(scaling function)와 웨이브릿(wavelet)을 이용한다. 스케일링 함수를 1로, 웨이브릿 함수를 0으로 할당하여 2진 데이터를 변조한다. 기존의 웨이브릿 편이 변조 시스템에서는 복원을 위해 후처리가 필요하였다. 된 논문에서는 2진정합필터를 이용하여 복원하므로, 별도의 후처리 과정 없이 복원을 가능하게 하였다. 모의실험 결과 제안한 알고리즘이 타당함을 확인하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.425-430
• /
• 2017

This paper presents a novel method for identification of FSK modulated radar signal. Three features which measure the number of frequency tones, the regularity of the frequency shifting, and the diversity of power spectrum of detected radar signal, are introduced. A Two-step combined maximum likelihood classifier was used to identify the details of the detected FSK signal; the modulation order and the use of Costas code. We attempted to divide FSK signal into binary FSK, ternary FSK, 8-ary FSK, and FSK with Costas code of length 7. The simulation results indicated that the proposed methods achieves an averaged identification accuracy was 99.93% at a signal-to-noise of 0 dB.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.583-587
• /
• 2015

In this study, a half-duplex mutual communication device via human skin was developed. Frequency-shift keying (FSK) digital modulation and demodulation control were used to transmit and receive data. Data communication through the human body is an effective communication technique and has high-grade security characteristics. In addition, making contact is a natural instinct of humans. Transmitting data through the human body is currently a highly conspicuous technology, because recently a lot of commercial sensors for humans have been developed. A body area network (BAN) can be easily constructed by this communication method on human skin. In this study, a half-duplex FSK mutual communication device was developed using a commercial FSK modulator and demodulator. A special control switching circuit and communication sequence were developed for mutual communication through human skin.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1134-1136
• /
• 2002

This paper proposes a FSK(Frequency Shift Keying) transmitter which has a inverter for power amplification instead of linear amplifier. As it can generate large signal using resonant circuit under the low voltage source even if the impedance of antenna is large as like a loop antenna of TWC(Train to Way-side Communication) system. In this paper, the proposed fully digital controlled transmitter including FSK modulation is presented and its control schemes are discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.632-637
• /
• 2000

In this paper, to control with light dimming levels of the fluorescent lamps, we have used the power line instead of the signal line to transmit the control signals. To reduce the BER(Bit Error Rate) on the power line communication with the serious noise interferences. We have adapted the FSK(Frequency Shift Keying) modulation and demodulation technique. Since the electronic ballast produced the EMI(ElctroMagnetic Interference) noise in some frequency bands, we have reduced the EMI levels in the band below -50dB. By varying the switching frequency of the ballast for the FL032/T8 from 18kHz to 25kHz, it is possible that the dimming levels are controled with the range of 5∼100%

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.4
• /
• pp.159-166
• /
• 2020

The IBC (Intra-Body Communication) benefits from a wireless communication system for exchanging various kinds of digital information through wearable electronic devices and sensors. The IBC using the human body as the transmission channel allows wireless communication without the transmitting radio frequency waves to the air. This paper discusses the results of experiments on electrostatic coupling IBC based on FSK (Frequency Shift Keying) and 1 bit error correction. We implemented FSK communication and 1 bit error correction algorithm using the MCU boards and aluminum tape electrodes. The transmitter modulates digital data using 50% duty square wave as carrier signal and transmits data through human body. The receiver performs ADC (Analog to Digital Conversion) on carrier signal from human body. In order to figure out the frequency of carrier signal from ADC results, we applied zero-crossing algorithm which is used to detect the edge characteristic in computer vision. Experiment results shows that digital data modulated as square wave can be successfully transmitted through human body by applying the proposed architecture of a 1ch GPIO as a transmitter and 1ch ADC for as a receiver. Also, this paper proposes 1 bit error correction technique for reliable IBC. This technique performs error correction by utilizing the feature that carrier signal has 50% duty ratio. When 1 bit error correction technique is applied, the byte error rate at receiver side is improved around 3.5% compared to that not applied.