• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.257-263
• /
• 2007

Detection of structural damage is an inverse problem in structural engineering. There are three main questions in the damage detection: existence, location and extent of the damage. In concept, the natural frequency and mode shapes of any structure must satisfy an eigenvalue problem. But, if a potential damage exists in a structure, an error resulting from the substitution of the refined analytical finite element model and measured modal data into the structural eigenvalue equation will occur, which is called the residual modal forces, and can be used as an indicator of potential damage in a structure. In this study, a useful damage detection method is proposed and compared with other two methods. Two degree-of-freedom system and Cantilever beam are used to demonstrate the approach. And the results of three introduced method are compared.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.1
• /
• pp.216-239
• /
• 2021

The present work addresses the challenging problem of coordinating power allocation with interference management in multi-robot networks by applying the promising expansion capabilities of multiple-input multiple-output (MIMO) and full duplex systems, which achieves it for maximizing the throughput of networks under the impacts of Doppler frequency shifts and external jamming. The proposed power allocation with interference coordination formulation accounts for three types of the interference, including cross-tier, co-tier, and mixed-tier interference signals with cluster head nodes operating in different full-duplex modes, and their signal-to-noise-ratios are respectively derived under the impacts of Doppler frequency shifts and external jamming. In addition, various optimization algorithms, including two centralized iterative optimization algorithms and three decentralized optimization algorithms, are applied for solving the complex and non-convex combinatorial optimization problem associated with the power allocation and interference coordination. Simulation results demonstrate that the overall network throughput increases gradually to some degree with increasing numbers of MIMO antennas. In addition, increasing the number of clusters to a certain extent increases the overall network throughput, although internal interference becomes a severe problem for further increases in the number of clusters. Accordingly, applications of multi-robot networks require that a balance should be preserved between robot deployment density and communication capacity.

• Advances in aircraft and spacecraft science
• /
• v.9 no.4
• /
• pp.301-318
• /
• 2022

This paper presents the free vibration analysis of 3D printed sandwich beams by using high-order theories based on the Carrera Unified Formulation (CUF). In particular, the component-wise (CW) approach is adopted to achieve a high fidelity model of the printed part. The present model has been used to build an accurate database for collecting first natural frequency of the beams, then predicting Young's modulus based on an inverse problem formulation. The database is built from a set of randomly generated material properties of various values of modulus of elasticity. The inverse problem then allows finding the elastic modulus of the input parameters starting from the information on the required set of the output achieved experimentally. The natural frequencies evaluated during the experimental test acquired using a Digital Image Correlation method have been compared with the results obtained by the means of CUF-CW model. The results obtained from the free-vibration analysis of the FDM beams, performed by higher-order one-dimensional models contained in CUF, are compared with ABAQUS results both first five natural frequency and degree of freedoms. The results have shown that the proposed 1D approach can provide 3D accuracy, in terms of free vibration analysis of FDM printed sandwich beams with a significant reduction in the computational costs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1719-1721
• /
• 2015

In this paper, we investigate a frequency assignment problem from graph theory for military communications. We propose an algorithm based on the graph coloring theory and confirm that we utilize 0.77 times lower number of frequencies. We also propose a hybrid algorithm that facilitates a trade-off between the range and the spectrum utilization gain.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.728-732
• /
• 2010

GIS(Gas insulated switching gear) is power equipment with excellent dielectric strength and is economy merit in high confidence and stability. Recently, because equipment of GIS was occurring problem of confidence used for a long time, partial discharge on-line diagnosis systems have been importantly recognized. Partial discharge (PD) detection is an effective means for monitoring and evaluation of dielectric condition of gas insulated system (GIS). The ultra-high-frequency (UHF) PD detection technique can detect and locate the PD sources inside GIS by detecting electromagnetic wave emitted from PD source. Therefore, real-time diagnostic system using UHF detection method has been developed for this application is being expanded gradually. However, the signal of partial discharge occurring in SF6 gas is very weak and susceptible to external noises which mainly consist of PD in air. Thus, it is important to distinguish the PD in SF6 gas more sensitively from the external noises. Unfortunately, these external noise signals and the partial discharge signals have very similar characteristics. Therefore, to solve this problem, we need the signal processing method for distinguish partial discharge signals with external noise signals for improvement of SNR(signal to noise ratio) and sensitivity. In this paper, we proposed internal signal processing method for removing external noise signals with built-in pre.amplifier and frequency conversion circuit.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.816-823
• /
• 2018

The Auto-synchronizer is essential equipment for synchronizing a generator to the power system. It is performing that measurement of the magnitude, frequency and phase of the voltage signal of the power system and generator. It is important to select the appropriate measurement algorithm for preventing various problem such as mechanical stress and Electrical problem. Teager Energy Operator(TEO) and Discrete separation algorithm(DESA) is measurable the instantaneous parameters of a sine wave using 5 samples and can be measured at a fast and with a simple operation. Therefore it has many advantages in measuring the parameters. In this paper, it confirmed measurement results using matlab simulations when there are synchronized in order of frequency, magnitude. Also it presented methods using digital filters and sample intervals to improve accuracy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.667-672
• /
• 2013

In this paper, we propose a multi-impedance changes localization method of on-voltage underground power cable using the wavelet transform based time-frequency domain reflectometry (WTFDR). To localize the impedance change in on-voltage power cable, the TFDR is the most suitable among reflectometries because the inductive coupler is used to inject the reference signal to the live cable. At this time, the actual on-voltage power cable has multi-impedance changes such as the automatic section switches and the auto load transfer switches. However, when the multi-impedance changes are generated in the close range, the conventional TFDR has the cross term interference problem because of the nonlinear characteristics of the Wigner-Ville distribution. To solve the problem, the wavelet transform (WT) is used because it has the linearity. That is, using WTFDR, the cross term interference is not generated in multi-impedance changes due to the linearity of the WT. To confirm the effectiveness and accuracy of the proposed method, the actual experiments are carried out for the on-voltage underground power cable.

• Journal of KSNVE
• /
• v.8 no.3
• /
• pp.542-552
• /
• 1998

The noise sources, structure-borne and/or air-borne, in machinery can be defined by their locations and strengths. However the locations of that noise sources are well known in many cases. In those cases, the problem can be defined as an inverse problem to known the strengths of the noise sources in the frequency domain, the modeling scheme is classified by thecoherent or incoherent source. This paper expands the basic concept to the case of the complex noise sources, in which the set of coherent and incoherent noise sources are matched with the noise of a real vehicle. The error factors in the experiment and the optimal number of the monopole sources to match the real suond filed are also investigated. The results of the noise source modeling of heavy machinery show that the incoherent and coherent/incoherent source models are applicable to the high frequency and the low frequency region, respectively. The noise source model also enables the noise source analysis to rank the contribution of real source group such as engine, T/M, exhuast, etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.358-364
• /
• 2007

RFID, Radio Frequency Identification, technology is a contactless automatic identification technology using radio frequency. For this RFID technology to be widely spread, the problem of multiple tag identification, which a reader identifies a multiple number of tags in a very short time, has to be solved. Up to the present, many anti-collision algorithms have been developed in order to solve this problem, and those can be largely divided into ALOHA based algorithm and tree based algorithm. In this paper, two new anti-collision algorithms combining the characteristics of these two categories are presented. And the performances of the two algorithms are compared and evaluated in comparison with those of typical anti-collision algorithms: 18000-6 Type A, Type B, Type C, and query tree algorithm.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.7
• /
• pp.332-339
• /
• 2008

Radio Frequency Identification (RFID) technology is an important part of infrastructures in ubiquitous computing. Although all products using tags is a target of these services, these products also are a target of attacking on user privacy and services using authentication problem between user and merchant, unfortunately. Presently, it is very important about security mechanism of RFID system and in this paper, we analyze the security protocol among many kinds of mechanisms to solve privacy and authentication problem using formal verification and propose a modified novel protocol. In addition, the possibility of practical implementation for proposed protocol will be discussed.