• Title/Summary/Keyword: frequency problem

Search Result 3,569, Processing Time 0.028 seconds

Establishment of Resilient Infrastructures for the Mitigation of an Urban Water Problem: 1. Robustness Assessment of Structural Alternatives for the Problem of Urban Floods (도시 물 문제 저감을 위한 회복탄력적 사회기반시설 구축: 1. 도시 홍수 문제 구조적 대안의 내구성 평가)

  • Lee, Changmin;Jung, Jihyeun;An, Jinsung;Kim, Jae Young;Choi, Yongju
    • Ecology and Resilient Infrastructure
    • /
    • v.3 no.2
    • /
    • pp.117-125
    • /
    • 2016
  • Current cities encounter various types of water problems due to rapid urbanization and climate change. The increasing significance of urban water problems calls for the establishment of resilient alternatives to prevent and minimize social loss that results from these phenomena. As a background research for establishing resilient infrastructures for the mitigation of urban water problems, we evaluated the robustness of structural alternatives for urban flood as a representative case. Combining the robustness index (RI) and the cost index (CI), we suggested the robustness-cost index (RCI) as an indicator of the robustness of structural alternatives, and applied the index to assess the existing infrastructures and structural alternatives (i.e., sewer network expansion, additional storage tank construction, and green roof construction) at a site prone to floods located around Gangnam-station, Seoul, Korea. At a rainfall intensity frequency range of 2 to 20 years, the usage of a storage tank and a green roof showed relatively high RCI value, with a variation of an alternative showing greater RCI between the two depending on the size of design rainfall. For a rainfall intensity frequency of 30 years, installing a storage tank with some green roofing was the most resilient alternative based on the RCI value. We proposed strategies for establishing resilient infrastructures for the mitigation of urban floods by evaluating the robustness of existing infrastructures and selecting optimal structural alternatives with the consideration of scales of design disaster.

Detection of Precise Crop Locations under Vinyl Mulch using Non-integral Moving Average Applied to Thermal Distribution

  • Cho, Yongjin;Yun, Yeji;Lee, Kyou-Seung;Lee, Dong-Hoon
    • Journal of Biosystems Engineering
    • /
    • v.42 no.2
    • /
    • pp.117-125
    • /
    • 2017
  • Purpose: Damage to pulse crops by wild birds is a serious problem. The damage is to such an extent that the rate of damage during the period between seeding and cotyledon stages reaches 54.6% on an average. In this study, a crop-position detection method was developed wherein infrared (IR) sensors were used to determine the cotyledon position under a vinyl mulch. Methods: IR sensors that helped measure the temperature were used to locate the cotyledons below the vinyl mulch. A single IR sensor module was installed at three locations of the crops (peanut, red lettuce, and crown daisy) in the cotyledon stage. The representative thermal response of a $16{\times}4$ pixel area was detected using this sensor in the case where the distance from the target was 25 cm. A spatial image was applied to the two-dimensional temperature distribution using a non-integral moving-average method. The collected data were first processed by taking the moving average via interpolation to determine the frame where the variance was the lowest for a resolution unit of 1.02 cm. Results: The temperature distribution was plotted corresponding to a distance of 10 cm between the crops. A clear leaf pattern of the crop was visually confirmed. However, the temperature distribution after the normalization was unclear. The image conversion and frequency-conversion graphs were obtained based on the moving average by averaging the points corresponding to a frequency of 40 Hz for 8 pixels. The most optimized resolutions at locations 1, 2, and 3 were found on 3.4, 4.1, and 5.6 Pixels, respectively. Conclusions: In this study, to solve the problem of damage caused by birds to crops in the cotyledon stage after seeding, the vinyl mulch is punched after seeding. The crops in the cotyledon stage could be accurately located using the proposed method. By conducting the experiments using the single IR sensor and a sliding mechanical device with the help of a non-integral interpolation method, the crops in the cotyledon stage could be precisely located.

Influence of Sexual Desire Caused by Watching Phonography on Human Body (음란물 시청으로 야기된 성욕이 인체에 미치는 영향)

  • Kim, Bong Hyun;Cho, Dong Uk;Kim, Hee Dae;Lee, Bum Joo;Park, Young;Jeong, Yeon Man
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.42 no.4
    • /
    • pp.831-837
    • /
    • 2017
  • The development of various electronic media such as the Internet and smart phones, each kinds of media informations has been accompanied by the fact that various types of media information are provided from one media, and on the other hand, various dysfunctions including smart phone addiction are also caused by a very large social problem. Especially, one of the biggest dysfunctions is the social crime problem such as sex crime caused by increased sexual desire according to watch the phonography, and even if it is not a social crime, watching the phonography has influenced bad mental and physical on human body. In this paper, we try to analyze what kind of change occurs in the voice in order to investigate what kind of bad influence it has on the human body after watching the phonography. In other words, the voice in the human body is the place where the human body signal is most expressed with the face. Therefore, the purpose of this study is to investigate the effects on the organs of the human body by comparing the change of voice before and after watching phonography. Experimental results showed that the stress hormone was increased by the inability to resolve sexual desire after watching the phonography, which resulted in an increase in the bandwidth of the 3rd formant frequency.

A Study on the Recognition of Population Problems of Male and Female Students using Text-mining: To Drive the Implications of Population Education (텍스트마이닝기법을 활용한 남녀 학생의 인구문제에 관한 인식 분석: 인구교육의 시사점 도출을 위하여)

  • Wang, Seok-Soon;Shim, Joon-Young
    • Journal of Korean Home Economics Education Association
    • /
    • v.31 no.3
    • /
    • pp.73-90
    • /
    • 2019
  • The purpose of this study was to explore the differences in perceptions of male and female students about population problems and to draw up implications for population education. Using text mining, the report about population problem, which had written by students in population education class, were analysed. After extracting key words, semantic networks were visualized. The results were as follows. First, the high frequency words were the same for each gender. Second, key words based on frequency did not differ depending on gender. And the key words extracted by the correlation analysis and bigram were different. That is, in the semantic network of girls' words, the network of "life"-"marriage"-"birth"-"pregnancy" appeared independently, distinguishing it from male students who showed separate objective links to population problems. Therefore, it drew suggestions that male and female students should be viewed as heterogeneous groups with different cognitive structures on population problems and that the content and methods of population education should be approached differently depending on gender.

Evaluation of the Response of BRM Analysis with Spring-Damper Absorbing Boundary Condition according to Modeling Extent of FE Region for the Nonlinear SSI Analysis (비선형 SSI 해석을 위해 Spring-Damper 에너지 흡수경계조건을 적용한 BRM의 유한요소 모델링 범위에 따른 응답평가)

  • Lee, Eun-Haeng;Kim, Jae-Min;Jung, Du-Ri;Joo, Kwang-Ho
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.29 no.6
    • /
    • pp.499-512
    • /
    • 2016
  • The boundary reaction method(BRM) is a substructure time domain method, it removes global iterations between frequency and time domain analyses commonly required in the hybrid approaches, so that it operates as a two-step uncoupled method. The BRM offers a two-step method as follows: (1) the calculation of boundary reaction forces in the frequency domain on an interface of linear and nonlinear regions, (2) solving the wave radiation problem subjected to the boundary reaction forces in the time domain. In the time domain analysis, the near-field soil is modeled to simulate the wave radiation problem. This paper evaluates the performance of the BRM according to modeling extent of near-field soil for the nonlinear SSI analysis of base-isolated NPP structure. For this purpose, parametric studies are performed using equivalent linear SSI problems. The accuracy of the BRM solution is evaluated by comparing the BRM solution with that of conventional SSI seismic technique. The numerical results show that the soil condition affects the modeling range of near-field soil for the BRM analysis as well as the size of the basemat. Finally, the BRM is applied for the nonlinear SSI analysis of a base-isolated NPP structure to demonstrate the accuracy and effectiveness of the method.

A Study on the Quantity Food Production Practices of Foodservice in Sangju and Near-by Region (상주 및 인근지역 단체급식소의 다량조리 실태 연구 -식단분석 및 다량조리 실태-)

  • 박모라;김귀영;박필숙;강우원
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.8 no.1
    • /
    • pp.36-50
    • /
    • 1998
  • The purpose of this study was to investigate quantity food production practices in foodservices by analysing the menus of April, 1996, The questionnaire was developed and responded to by 96 dietitians in Sangju, Munkyung, Gumee, Kimchun, and Andong during November, 1996. The survey was performed by simple random samplings. The results were as follosw; 1. Hospitals and industry served food for thirty days and schools for twenty days. Kimchi was a select-menu for hospitals and one side dish for industry and schools. The type of menu was a single use menu which consisted of cooked rice, soups and three side dishes. 2. The most frequently used ingredients were green onions, rice, carrots, onions, Korean radish roots, pork, eggs, glutinous rice, and milk. Kimchis were served most frequently in all food services and cooked rices and soups were next. 3. The age of most of the respondents was 26 to 30.54.2% of subjects were juniou college graduates and 77.1% were single. Fifty seven point three percent of the dietitians lived with family relatives, or friends. 87.5% of the dietitians had been working for 1 to 5 years. 4. Most foodservices were self-operated. The number of meals served was determined by meal coupon counting in hospitals(37.5%), meal board counting in industry(29.2%), and attendance card counting in schools(41.1%) The cost of sales per meal was approximately 2,450 won in hospitals and was approximately 1,100 won in industry and schools. The average number of days per menucycle was 7.4 in hospitals. 10.3 in industry and 25.5 in schools. Hospitals, industry, and schools held about 118, 265 and 263 recipes respectively. The average number of dietitians was 2.6 in hospitals and 1.0 in industry and schools. Except for the number of recipes, the general practices of foodservices were significantly different(P<0.05). 5. In the general quantity food production, food and seasonings measuring was hardly done. the percentage of foodservices using chemical seasonings was higher in hospitals and industry than in schools. the most important concern was taste, Registered cooks were employed in 75% of schools but only 50.0% in hospitals and 20.8% in industry. Most of the dietitians respinded that their cooks skill was not bad. The education of unregistered cooks was performen once or two times a month in hospitals and industry, and in schools performed everyday. The problem when educating cooks was the lack of cooking skill of the dietitians in schools, and the lack of time in hospitals, and the negative attitude toward education in industry. The method for improving cooking in all foodservices was OJT, or the extension of education facilities and the development and dissemination of standard recipes. The frequency of throwing away leftovers was higher in hospitals. But in industry, the frequency of saving leftovers was higher. 6. Though all foodservices have standard recipes, the number that used them was low, Another problem is that standard recipes resulted in leftovers. The inconveniences of using standard recipes were the difficulty of applying standard recipes to various numbers of customers the complication of use, or facility insufficiency.

  • PDF

A Study on Urinary Incontinence of Elderly Communities (지역사회 거주 노인의 요실금에 관한 연구)

  • Ju, Young-Hee;Kim, Jung-Soon
    • Research in Community and Public Health Nursing
    • /
    • v.11 no.2
    • /
    • pp.441-452
    • /
    • 2000
  • The purpose of this study was to identify the prevalence of urinary incontinence and its relating factors elderly communities. Subjects of this survey consisted of 877 elderly women and men in one Kun. Korea, who were over 60 years old. The design for this study was descriptive: the subjects were interviewed by well trained investigators from July 9. 1999 to July 20. 1999. During that survey period, the subjects were interviewed with a structured questionnaire. The data were analyzed by frequency, percentage, $X^2-test$. T-test using an SAS program. The results of the study were the following: 1. The prevalence rate of urinary incontinence was 20.1 %. of the total. The types of urinary incontinence were mixed incontinence 44.3%. stress incontinence 38.1%. and urge type incontinence 17.6%. 2. The relating factors of urinary incontinence were as follows: 1) 33.5% of UI(urinary incontinence) subjects reported urine loss once a month. twice or three times a week 23.3%. one or two times a day 17.0% 2) 38.1% of elderly reported only 1 to 2 drops. 1 t-spoon 36.9%. 1 T-spoon 15.9% 3) The volume of urine loss registered by changing underwear was 63.1 %. no necessity of changing underwear was 22.1 %. or using some type of pads was 13.1%. 4) 62.5% of UI subjects never discussed their UI problem with other people. 73.9% of the total had never experienced any treatment for their UI problem. The reasons for not receiving medical cure were their typical conception about urinary incontinence taking UI as a normal part of aging 76.2% and due to their bad financial situation 9.2%. 3. Women had more prevalence of UI than men (p=0.01), and it was found that the worse the subjective health state. the higher the prevalence of UI (p=0.001). However. there was no statistical difference in daily frequency of UI (p>0.05). The more nocturnal incontinence (p=0.001), the more intermittent stream experience (p = 0.01), the more retention experience (p = 0.01), and the more incomplete the emptying experience (p=0.001), the higher the prevalence of UI. 4. UI groups had lower ADL scores than non UI groups(p=0.01). The level of depression in the group of urinary incontinence was significantly higher than that of non incontinence group (p=0.0001). As shown above, the elderly people suffering from UI haven't been treated properly: their subjective health state and their ADL competence was lower, and their depression level was higher than non UI groups. Therefore, the development of a proper urinary incontinence management program are required so that they can lead more healthy lives. Also continual case studies for the elderly people with UI are necessary.

  • PDF

Design of RFID Authentication Protocol Using 2D Tent-map (2차원 Tent-map을 이용한 RFID 인증 프로토콜 설계)

  • Yim, Geo-su
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.13 no.5
    • /
    • pp.425-431
    • /
    • 2020
  • Recent advancements in industries and technologies have resulted in an increase in the volume of transportation, management, and distribution of logistics. Radio-frequency identification (RFID) technologies have been developed to efficiently manage such a large amount of logistics information. The use of RFID for management is being applied not only to the logistics industry, but also to the power transmission and energy management field. However, due to the limitation of program development capacity, the RFID device is limited in development, and this limitation is vulnerable to security because the existing strong encryption method cannot be used. For this reason, we designed a chaotic system for security with simple operations that are easy to apply to such a restricted environment of RFID. The designed system is a two-dimensional tent map chaotic system. In order to solve the problem of a biased distribution of signals according to the parameters of the chaotic dynamical system, the system has a cryptographic parameter(𝜇1), a distribution parameter(𝜇2), and a parameter(𝜃), which is the constant point, ID value, that can be used as a key value. The designed RFID authentication system is similar to random numbers, and it has the characteristics of chaotic signals that can be reproduced with initial values. It can also solve the problem of a biased distribution of parameters, so it is deemed to be more effective than the existing encryption method using the chaotic system.

Study of Condition Analysis and Diagnosis on Oil Paintings with Terahertz Imaging (테라헤르츠 이미징기법을 이용한 유화의 상태분석 및 진단)

  • Baek, Na Yeon;Song, You Na;Kim, Moon Jeong;Chung, Yong Jae;Lee, Han Hyoung
    • Journal of Conservation Science
    • /
    • v.35 no.3
    • /
    • pp.237-244
    • /
    • 2019
  • In this study, we applied terahertz imaging technology to three Korean modern oil paintings ('Boy,' 'Girl,' and 'Hyehwadong Landscape'); investigated the types of inner layer information in the pictures that can be extracted with terahertz imaging technology; and analyzed the conditions for extracting them. The biggest problem in the terahertz imaging analysis we encountered was the image distortion caused by the change of the distance between the target surface and the terahertz detector, depending on the surface curvature of the target paintings. We then developed a 'working distance maintaining device' to solve this problem. As a result, the terahertz imaging technique was used to identify the base material characteristics and any patterns of damage inside, and presented the optimal conditions for identifying each characteristic. In addition, it was useful to employ the terahertz frequency-division image to check the characteristics of the background materials. To confirm coloring techniques such as brush strokes, it is effective to compare the maximum reflection peak image with the cross-section image; and to detect damage information inside the paintings that cannot be observed on the surface, to compare the cross-section image with the frequency-division image. On the other hand, according to the terahertz imaging analysis of the oil paintings, the internal structural damage marks of 'Boy' and 'Girl' were confirmed, and the artist's painting style was confirmed in 'Hyehwadong Landscape.' The above results are expected to be useful for the analysis and diagnosis of Korean modern oil paintings for their preservation.

Collision Tree Based Anti-collision Algorithm in RFID System (RFID시스템에서 충돌 트리 기반 충돌방지 알고리즘)

  • Seo, Hyun-Gon
    • Journal of KIISE:Information Networking
    • /
    • v.34 no.5
    • /
    • pp.316-327
    • /
    • 2007
  • RFID (Radio Frequency Identification) is one of the most promising air interface technologies in the future for object identification using radio wave. If there are multiple tags within the range of the RFID tag reader, all tags send their tag identifications to the reader at the same time in response to the reader's query. This causes collisions on the reader and no tag is identified. A multi-tag identification problem is a core issue in the RFID. It can be solved by anti-collision algorithm such as slot based ALHOA algorithms and tree based algorithms. This paper, proposes a collision tree based anti-collision algorithm using collision tree in RFID system. It is a memory-less algorithm and is an efficient RFID anti-collision mechanism. The collision tree is a mechanism that can solve multi-tag identification problem. It is created in the process of querying and responding between the reader and tags. If the reader broadcasts K bits of prefix to multiple tags, all tags with the identifications matching the prefix transmit the reader the identifications consisted of k+1 bit to last. According to the simulation result, a proposed collision tree based anti-collision algorithm shows a better performance compared to tree working algorithm and query tree algorithm.