• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.90-94
• /
• 2004

In this treatise, The "Induction-Heating" and "The Skin Effect" which resulted from the High-Frequency using the High-Frequency Resonant Inverter are showed by this paper. It would research into "The Electro-magnetic Induction" and "The skin Effect" with an aluminum which is the typical paramagenetic metal. Ultimately, it was focused on the possibility of the heating for an aluminum sheet and draw up its practical use-plan.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.227-234
• /
• 1988

To study diagnosis and treatment plan of malocclusion, comparison of race and nation and consideration of treatment technique, 885 orthodontic patients of the department of orthodontics, Infirmary of dental college, Chosun University were evaluated. The frequency and pattern of tooth extraction were studied according to malocclusion types and developmental stages of occlusion and sex. Thefollowingresultswereobtained. 1. Average frequency of tooth extraction for orthodontic treatment was $38.3\%$. 2. The frequency of tooth extraction was $43.7\%$ in class I malocclusion, $34.2\%$ in class II malocclusion and $32.1\%$ in class III malocclusion. 3. The drequency of tooth extraction was the highest in permanent dentition $(49.2\%)$. 4. The frequency of tooth extraction was not different between male and female. 5. The frequency of 3-4 premolars extraction was the highest $(57.5\%)$ and that of lower incisor extraction was the lowest $(2.9\%)$ in patterns of tooth extraction. 6. Both frequency of unilateral and single arch extraction were the highest in class III malocclusion.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.376-376
• /
• 2006

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.62-73
• /
• 2008

In this paper, domestic standard revision plan of dynamic frequency method which is used both in unmanned automatic toll collection system and manned collection system of the express highway is presented. For such ETCS, the infrared rays (870 nm) of active frequency method and the frequency integrated method (5.8 GHz) are adopted and extended to be operated to the all around the Toll Gate. This standardization plan is based on inter connection reference model between OSI (Open System Interconnection) in process of ITS short range radio communication standardization of 5.8 GHz bandwidth to support traffic information and control system service, and the derived revision plan by starting from physical layer which support interoperability for multiple access between RSE (Road Side Equipment) and OBE (On Board Equipment), in which is categorized into physical layer, data link layer, and application layer. In case of radiation power, existing standard is divided by class1 (within 10 m) and Class2 (within 100 m) according to transmission lengthwhile it is operated with just single standard 'Class1' because of notification of Ministry of Information and Communication in 2004. In the case of the limitation value of incident power in communication area, considering operation plan of ETCS that is on actuality operation the measurements are reflected to the standard. In other wort this paper proposed the improvement standard of incident power, pseudo response in the communication area and radiated power in order to secure stability and compatibility among operator systems about the needed part on ETCS operation.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2008.06a
• /
• pp.111-115
• /
• 2008

Textile industry of Domestic has been descended in the sector of design, brand, recognition comparing with developed countries. And products of middle and low price do not have competitiveness against developing countries. In addition, textile industry market is changing from the provider market-oriented to consumer-driven market. RFID(Radio Frequency Identification) is the core technology to correspond in the these environmental change. RFID is a technology that is used to communicate with identified objects using radio waves, so that the objects can be recognized, tracked and traced. In this study, we reviewed characteristic and present condition of domestic textile industry and newest technology aspect of RFID. Also, we suggested application plan of RFID technology in textile industry through the analyzing RFID application case of domestic and outside the country textile industry.

• International journal of advanced smart convergence
• /
• v.13 no.1
• /
• pp.180-184
• /
• 2024

Since COVID-19, many foreign tourists have visited Korea for medical tourism. When statistical data were checked from 2022, after COVID-19, the number of foreign patients visiting Korea for two years was 24.8 million, an increase of 70.1% from 2020. It was confirmed that it has achieved a 50% level compared to 2019 (Statistics Office, 2023). Therefore, to create a development plan by linking medical tourism and wellness tourism, the purpose of this study is to find the link between medical tourism and wellness tourism as big data and present a development plan. In this research method, medical tourism, and wellness tourism for two years from 2022 to 2023 from the post-COVID period as big data are set as central keywords to compare text data to find common points. When analyzing wellness tourism and medical tourism, it was confirmed that most wellness tourism had a greater frequency than medical tourism. This confirmed that wellness tourism occupies a larger pie than medical tourism. As a result, when checking the word frequency, it was confirmed that wellness tourism and medical tourism share a lot as complex tourism products, and when checking 2-gram, to attract many medical tourists, it is necessary to combine medical tourism clusters and wellness tourism according to each other's characteristics among local governments.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2017

In this study, to design a multi-GNSS receiver using single RF front-end, the receiving performances for various frequency plans were evaluated. For the fair evaluation and comparison of different frequency plans, the same signal needs to be received at the same time. For this purpose, two synchronized RF front-ends were configured using USRP X310, and PC-based software was implemented so that the quality of the digital IF signal received at each front-end could be evaluated. The software consisted of USRP control, signal reception, signal acquisition, signal tracking, and C/N0 estimation function. Using the implemented software and USRP-based hardware, the signal receiving performances for various frequency plans, such as the signal attenuation status, overlapping of different systems, and the use of imaginary or real signal, were evaluated based on the C/N0 value. The results of the receiving performance measurement for the various frequency plans suggested in this study would be useful reference data for the design of a multi-GNSS receiver in the future.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.2
• /
• pp.111-120
• /
• 2020

This study assessed the reliability of the agricultural water supply based on future climate change scenarios, and suggested plans to improve the reliability in order to promote the adaptability of irrigation water in agricultural reservoirs to climate change. The assessment of agricultural water supply reliability was performed on reservoirs which had a lower water quantity than their design basis and which had recently been subject to drought. In other words, from the irrigation districts of main intake works among the reservoirs managed by the Korea Rural Community Corporation, 1~2 districts in each province-that is, a total of 13 districts -that were recently designated as a district for securing agricultural water (drought prevention district) were selected. Climate change scenarios were applied to the selected districts to analyze their future water supply reliability compared to the current level. All districts selected showed a drought frequency of 4 years or shorter, which demonstrated the need to establish climate change response plans. As plans for responding to climate change, a plan that utilizes supplemental intake works to reduce the area of the irrigation districts of main intake works, and another one that increases the capacity of main intake works were adopted to reanalyze their water supply reliability. When the area of the irrigation districts of main intake works was reduced by about 30~40%, the drought frequency dropped to more than 10 years, securing the reliability of water supply. To secure the reliability by increasing the capacity of main intake works, it was calculated that about 19,000~2,400,000 tons need to be added to each reservoir. In addition, climate change response plans were suggested to improve the reliability of the water supply in each district based on the results of economic analysis.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.36.1-36.1
• /
• 2010

OFC (Optical Frequency Comb) is an optical spectrum which consists of equidistant lines in frequency space. OFC can thus be used as an optical ruler. Since it was demonstrated in late 1990s, it is revolutionizing many fields in frequency metrology such as the measurement of absolute optical frequencies, the measure ratios of optical frequencies with extremely high precision. It is also used in high-precision spectroscopy. In astronomy, OFC can be used as a very accurate and stable wavelength standard for a high resolution spectrograph to measure the radial velocity of celestial bodies with extremely high accuracy of about several tens cm/s. In our presentation, we will introduce some basic concepts of OFC and some issues to use it in astronomical spectrograph. We will also present our plan to develop a high resolution spectrograph with OFC.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.44-47
• /
• 2005

This paper presents the efficient plan for the EMI improvement from of TFT-LCD Module. It investigates the frequency characteristics of Power/Ground Plane of TFT-LCD drive circuit PCB concretely. After the frequency characteristics is reviewed, EMI improvement is tried to insert to RC termination between Power/Ground Plane and to shift resonance frequency. It is confirmed by a simulation result and RC Termination which is inserted the point where the resonance characteristics change is necessary. It applied in 19 "SXGA TFT-LCD drive circuits and the EMI improvement verification is described.