• 천문학논총
• /
• 제22권3호
• /
• pp.83-87
• /
• 2007

We designed the Intermediate Frequency(IF) distributor for multi beam backend system and manufactured Voltage to Frequency Converter(VFC) to measure the multi-beam receiver performance. Multi beam receiver has 15 channel receivers and can get 15 spectrums at once. The multi beam receiver has more observation efficiency than single beam receiver. We manufactured the 15 IF distributors to distribute IF signal for Autocorrelation spectrometer that is radio signal processor. Also, we manufactured the VF Converter to test the performance measurement of receiver for Korea VLBI Network(KVN) system which is under-construct in Seoul, Ulsan and Jeju. As a result of performance measurement, we could obtain linearity of 99.4% on the input power vs output frequency and measured the operating range of input frequency.

• 한국공간구조학회논문집
• /
• 제15권4호
• /
• pp.99-105
• /
• 2015

The serviceability design of the high-rise building is affected by the wind response vibration such as the acceleration, at this time it is important to calculate the natural frequency correctly. Since the suggestion equation of the natural frequency being used in the design phase is not the regression equation obtained from the vibration measurement of the high-rise building, the verification to use for the serviceability design of the high-rise building is necessary. This thesis conducted an ambient vibration measuring on the high-rise building through the mobile-phone application to calculate the natural frequency and suggested a natural frequency approximate expression following the building's height, and compared with the domestic/foreign standard and the result of the eigen-value analysis.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.146-150
• /
• 2001

Microwave model and high-frequency measurement of the ACF flip-chip interconnection was investigated using a microwave network analysis. S-parameters of on-chip and substrate were separately measured in the frequency range of 200 MHz to 20 GHz using a microwave network analyzer HP8510 and cascade probe. And the cascade transmission matrix conversion was performed. The same measurements and conversion techniques were conducted on the assembled test chip and substrate at the same frequency range. Then impedance values in ACF flip-chip interconnection were extracted from cascade transmission matrix. ACF flip chip interconnection has only below 0.1nH, and very stable up to 13 GHz. Over the 13 GHz, there was significant loss because of epoxy capacitance of ACF. However, the addition of SiO$_2$filler to the ACF lowered the dielectric constant of the ACF materials resulting in an increase of resonance frequency up to 15 GHz. High frequency behavior of metal Au stud bumps was investigated. The resonance frequency of the metal stud bump interconnects is higher than that of ACF flip-chip interconnects and is not observed at the microwave frequency band. The extracted model parameters of adhesive flip chip interconnects were analyzed with the considerations of the characteristics of material and the design guideline of ACA flip chip for high frequency applications was provided.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.599-607
• /
• 2004

이 논문은 PLL주파수 합성기의 루프 대역폭보다 높은 주파수에서 낮은 주파수까지 변화하는 신호에 대한 주파수 변조가 일정한 최대 주파수 편이를 갖도록 하는 단순하면서도 저가의 새로운 주파수 변조회로를 소개하였다. 이 주파수 변조회로는 PLL 안에서의 주파수에 따른 루프 필터의 궤환량을 보상하도록 설계되었고 최대주파수 편이값 조절과 루프와의 상호 간섭을 제거할 수 있도록 설계되었다. 또한 기존의 스펙트럼 분석기로 $\Delta$f(최대 주파수 편이)또는 $\beta$(변조 지수)를 측정하는 방법은 협대역 주파수 변조에서만 유용하여 광대역 주파수에서 측정할 수 있도록 새로운 측정방법을 제안하고 변조 신호 발생기를 이용하여 정확성을 확인하였다. 이런 한 방법으로 설계하여 제작한 회로를 측정하여 기대한 일정한 최대 주파수 편이를 가지는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1176-1180
• /
• 2021

The current study relates to RADAR (RAdio Detection and Ranging) application for level measurement of vitrified radioactive liquid nuclear waste. The vitrification of radioactive liquid waste is carried out in special equipment called 'Melters'. The study is directed towards the design and frequency modulation used in the level measurement of vitrified waste. More specifically, the RADAR design and frequency used for level measurement in a melter. This level measurement technique can also be used for dynamic vitrification process and can be used to measure the level variations without using any external medium/material and using only electromagnetic waves. Also, this technique is durable and accurate even under the high radioactive environment present inside the melter.

• Wind and Structures
• /
• 제31권1호
• /
• pp.21-29
• /
• 2020

The wind field measurement of severe winds such as hurricanes (or typhoons), thunderstorm downbursts and other gales is important issue in wind engineering community, both for the construction and health monitoring of the wind-sensitive structures. Although several wireless data transmission systems have been available for the wind field measurement, most of them are not specially designed for the wind data measurement in structural wind engineering. Therefore, the field collection is still dominant in the field of structural wind engineering at present, especially for the measurement of the long-term and high-frequency wind speed data. In this study, for remote wind field measurement, a novel wireless long-term and high-frequency wind data acquisition system with the functions such as remote control and data compression is developed. The system structure and the collector are firstly presented. Subsequently, main functions of the collector are introduced. Also novel functions of the system and the comparison with existing systems are presented. Furthermore, the performance of this system is evaluated. In addition to as the wireless transmission for wind data and hardware integration for the collector, the developed system possesses a few novel features, such as the modification of wind data collection parameters by the remote control, the remarkable data compression before the data wireless transmission and monitoring the data collection by the cell phone application. It can be expected that this system would have wide applications in wind, meteorological and other communities.

• 한국항행학회논문지
• /
• 제16권4호
• /
• pp.602-610
• /
• 2012

GPS 신호의 주요 오차 요인 중 전리층 지연 오차는 신호 주파수에 따라 지연량이 달라지는 특성을 가진다. 이중 주파수 사용자는 L1, L2 주파수의 의사거리 측정치의 차이 값을 이용하여 보정하게 되는데, 이렇게 추정된 전리층 지연 추정치에는 의사거리 잡음에 의한 오차가 포함되게 되므로 일반적으로 필터를 통해 의사거리 측정치를 평활화 시킨 후 전리층 지연을 계산하게 된다. Weighted hatch filter는 측정치의 잡음 수준을 고려하여 최적의 평활화 된 의사거리 측정치를 계산해 낼 수 있으나, 이를 이용하기 위해서는 측정치 잡음에 대한 모델링이 필요하다. 본 논문에서는 NDGPS 기준국들에 대하여 측정치 잡음 모델링을 수행하였다. 그리고 모델링 결과를 바탕으로 weighted hatch filter를 구성하여 평활화 된 의사거리 측정치 및 전리층 지연을 추정한 결과 필터를 적용하지 않은 것에 비하여 전리층 지연 오차의 표준편차가 1/25 가량으로 줄어드는 것을 확인하였다.

• 한국통신학회논문지
• /
• 제33권8A호
• /
• pp.846-851
• /
• 2008

통신 산업의 급격한 발달로 통신서비스의 종류가 다양해지고 전파사용이 증가함에 따라 이전의 전파감시 시스템을 대체할 효율적이고, 지능화된 전파감시 시스템의 개발이 필요하게 되었다. 차세대 지능형 전파감시 시스템은 ITU-R, 무선설비규칙 및 전파법을 근간으로 하여 V/UHF대역의 On-Air 상의 아날로그 및 디지털신호에 대해 스펙트럼분석을 통한 채널전력과 주파수편차 및 편이, 점유대역폭(99% 또는 x-dB)을 정확하고 효율적으로 전파측정 할 수 있도록 개발되었다, 시스템의 주요 기능은 전파품질측정, 불요파(스퓨리어스, 고조파)측정, 고속스펙트럼측정, 주파수이용효율조사, 불법전파탐사, 운용감시이고, 본 논문에서는 차세대 지능형 전파감시 시스템의 주요기능 중 전파품질측정, 고속스펙트럼측정에 대해 기술한다.

• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.1791-1797
• /
• 2014

수자원 관리를 위하여 활용되고 있는 FMCW 레이다 센서는 비트 주파수를 추정함으로서 표면 수위를 측정한다. 따라서 비트 주파수 추정치에서의 높은 신뢰성 및 정확도가 요구된다. 그러나 수위에 따른 비트 스펙트럼은 시스템의 주파수 선형성 및 측정 환경, 기상 상태에 따라 매우 다양한 형태를 나타낼 수 있다. 따라서 현재 사용되는 기존의 수위정보 추출 알고리즘의 정확도 및 신뢰성에 심각한 문제가 발생할 수 있다. 따라서 본 논문에서는 기존의 방법을 개선할 수 있는 고 해상도 비트 스펙트럼 추정에 의한 수위 정보 추출 방법들을 분석하였다. 이러한 방법들은 SNR 이 일정 기준 이상인 경우 더 정밀한 수위의 측정이 가능함을 보여준다. 그러나 SNR 이 매우 낮은 상황에서는 절대적인 오차수준이 크게 나타나지만 오히려 기존의 방법이 상대적으로 더 높은 신뢰도를 보인다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권3호
• /
• pp.186-195
• /
• 2000

In this paper, partial discharge (PD) measurement was performed to evaluate the quality of the cable joint and termination constructions. The resistive coupling technique for PD detection using resistivity of semiconducting layer of the cable in the accessories, such as joints and terminations. With high frequency PD (HEPD) measurement, an excellent sensitivity below 20pC could be achieved under unshielded condition. The localization of the defects in the accessories could be identified. During heating cycle, PDs were monitored and analyzed. At that time, the PDs were dependent on the temperature of the heating cycle and showed cyclic behaviors, which were attributed to local delamination of the interfaces, between epoxy unit and stress relief cone(SRC) and between SRC and cable, due to the difference of thermal expansion. As a conclusion, HFPD measurement technique was proven to be an effective diagnostic method for qualification of extra high voltage (EHV) cable accessories. With this technique, the optimal design of the components of the accessories could be verified not only in an early stage but also under operating condition. This technique would result in the improvement of the reliability of the EHV cable accessories.