• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.498-498
• /
• 2001

Seismic qualification of the Main Control Boards for nuclear power plants has been performed with the guideline of AS ME Section III. US NRC Reg. Guide and IEEE 344 code. The analysis model of the Main Control Boards is consist of beam. shell and mass element by using the finite element method. and, at the same time. the excitation forces and other operating loads for each model are encompassed with respect to different loading conditions. As the fundamental frequencies of the structure are found to be less than 33Hz. which is the upper frequency limit of the seismic load, the response spectrum analysis using ANSYS is performed in order to combine the modal stresses within the frequency limit. In order to confirm the structural and functional integrity of the major components, modal analysis theory is adopted to derive the required response spectrum at the component locations. As all the combined stresses obtained from the above procedures are less than allowable stresses and no mechanical or electrical failures are found from the seismic testing, it concludes the Main Control Boards is dynamically qualified for seismic conditions. Although the authors had confirmed the structural and functional integrity of both Main Control Boards and all the component, in this paper only the seismic analysis of the Main Control Board is introduced.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.288-294
• /
• 2015

Recently, the module-integrated converter has shown an interest in the photovoltaic generation system. In this system, the high frequency transformer should be compact and efficient. The proposed method is based on the correlation characteristic between the copper and core loss to minimize the loss of transformer. By sizing an effective cross-sectional area and window area of core, the amount of loss is minimized. This paper presents the design and analysis of high frequency transformer by using the 3D finite element model coupled with DC-DC converter circuit for more accurate analysis by considering the nonlinear voltage and current waveforms in converter circuit. The current waveform in each winding is realized by using the ideal DC voltage source and switching component. And, the thermal analysis is performed to satisfy the electrical and thermal design criteria.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.209-217
• /
• 2003

In this paper, the dynamic system modeling and the state sensitivity analysis of the spin-coater system are proposed for the reduction of the vibration. In the respect of modeling, the spin-coater system is considered to be composed of servomotor, spindle, supporting base and so on. Each component of model is combined and derived to 3 dimensional equations. The combined model is verified by experimental values of actual system in the frequency domain. By direct differentiation of the constraint equations with respect to kinematic design variables, such as eccentricity of spindle, moment of inertia, rotational stiffness and damping of supported base, sensitivity equations are derived to the verified state equations. Sensitivity of design variables could be used for vibration reduction and natural frequency shift in the frequency domain. Finally, dominant design variables are selected from the sensitivity analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.604-605
• /
• 2008

Modal participation factor (MPF) is a widely used in a mode-coupling squeal noise problem for finding the most sensitive component over a complex brake system in a vehicle using eigenvectors of sub-components. This methodology requires the problematic total response of system by the unstable squeal noise at a specific frequency as well as eigenvectors of each component belonging to brake system. In this paper, a unit-force response analysis is performed for intact total system to obtain eigenvectors of each component and then such data is directly used for the contribution analysis of a squeal noise problem. Since the eigenvectors of each component induced from virtual unit-excitation is most reliable owing to the intact boundary condition, it can be expected that the corresponding contribution analysis with MPF also provides a trustworthy result.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1833-1840
• /
• 1993

An efficient vibration analysis method, Component Mode Synthesis(CMS), for an exhaust system with bellows is presented. Analyses are performed for two types of bellows, where characteristics of vibration modes affecting idle shake and interior noise of a vehicle are examined. Also analyzed are the contributions of an exhaust and engine mounting system to the idle shake and interios noise. Comparison between the analysis and test is in good agreement, hence the CMS method is shown to be efficient and valid.

• Communications for Statistical Applications and Methods
• /
• 제9권2호
• /
• pp.491-503
• /
• 2002

In this paper, we propose a automatic document summarization method based on Principal Component Analysis(PCA) which is one of the multivariate statistical methods. After extracting thematic words using PCA, we select the statements containing the respective extracted thematic words, and make the document summary with them. Experimental results using newspaper articles show that the proposed method is superior to the method using either word frequency or information retrieval thesaurus.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.325-331
• /
• 2013

본 논문에서는 상용 프로그램 ABAQUS를 이용하여 브레이크 시스템의 불안정 모드를 알아보기 위한 복소고유치해석을 수행하였다. 또한 전체 시스템의 불안정 복소 고유모드에서 가장 진동에너지가 큰 부품을 알아보기 위한 기여도해석과 전체 복소 고유모드와 해당 부품의 부품모드간의 기여도해석을 통해 모드 연성의 가능성이 높은 모드를 알아보았다. 본 연구에서는 디스크 로터의 2차 굽힘모드와 토크멤버의 3차 축방향 횡모드의 연성에 의해 1.4kHz의 불안정 모드가 발생하는 것을 알 수 있었다. 이러한 모드 연성을 차단하기 위해 불안정성을 유발하는 토크멤버에서 해당모드의 주파수 변화에 대한 감도 해석을 실시하였다. 감도 해석 결과를 토대로 질량 가중에 의한 구조물 동특성 변경을 수행한 결과 저주파 영역에서 불안정 모드가 발생하지 않아 본 연구에서 제시된 저감방법의 유효성을 확인할 수 있었다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권5호
• /
• pp.273-278
• /
• 2002

Even though the modulating signal frequency of the light is too high to detect directly, the signal can be extracted by frequency conversion at the same time as the detection by means of the non-linearity of the APD. An analysis is presented for super-high-speed optical demodulation by an APD with electronic mixing. A normalized gain is defined to evaluate the performance of the frequency conversion demodulation. The nonlinear effect of the internal capacitance was included in the small signal circuit analysis. We showed theoretically and experimentally that the normalized gain is dependent on the down converted difference frequency component. In the experiment, the down converted different frequency outputs became larger than the directly detected original signal for the applied local signal of 20㏈m.

• 한국실내디자인학회논문집
• /
• 제26권5호
• /
• pp.83-92
• /
• 2017

This research is about the characteristics of the saccades that occurring in the process of observing the spatial. The size of the saccades is the visual activity for acquiring the information, and the search trace that left by the spatial visitor. Reviewed over the saccade through the analysis of observation process that appeared in the eye-tracking experiment of sports store from the department store, the saccade is defined as the sight movement in the process of finding a component to view in the spatial. If some spatial component induces saccade, and able to know which specific component acquired through the saccade, then the designer will have a clue which able to provide the spatial desired by the consumer. The results of analyzing the process in the deriving the spatial component and saccade characteristic from industrial space, can be summarised as follows. The first, the average fixed number of [IN].[OUT] zone appeared similarly, and it leads to knowing that the time used for attention with one frequency is about 0.3 seconds. Second, there were more saccades toward [$IN{\rightarrow}OUT$] (13 persons, 76.5%) than [$OUT{\rightarrow}IN$] (4 persons, 23.5%). The Los Angeles area has lots of interesting things to watch, so it able to thinks to begins with small saccade and then occur to bigger saccade activity to find new interests shortly after [OUT] saccade. Third, according to time range changes, keep eyes on the characteristics of saccade, [IN].[OUT] frequency has slightly decreased the changes of viewing time, but there was no significant change in an average number of observations. This means that the frequency and the number of observations are decreased together. Therefore, it can be seen that the amount of information to be acquired (frequency) is decreased (count) as the observation time elapses.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2004년도 추계학술대회 및 정기총회
• /
• pp.582-586
• /
• 2004

The purpose of this study is to examine the lead-lag relationship between volatility and returns in high frequency stock market data to see the validity of two hypotheses that explain volatility asymmetry. Specifically, wavelet analysis is applied to decompose the volatility process into permanent and transitory components and then each component is investigated in conjunction with returns. The results from cross-correlation analysis between volatility and returns support the leverage effect hypothesis rather than the volatility feedback hypothesis in all cases.