• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.855-865
• /
• 1999

This paper presents the improvement of BER performance using fading compensation method for 16 QAM-TCM to reduce the effects of multi-path fading in mobile radio environments. We propose the multi-pilot symbol aided fading compensation technique using Gausian interpolation method for inter-symbol interference or fading distortion occured in frequency selective fading channel. The proposed system is combined coding and modulation scheme for improving the reliability of a digital transmission system without increasing the transmitted power or the required bandwidth. In the fading compensation, the pilot symbols from a known sequence is multiplexed into the data symbols at regular intervals to from a frames for transmission. And we use a modified bit reversal block interleaver to randomize burst errors. The results show that significant improvements in the bit-error rate performances can be achieved by the proposed techniques.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.368-378
• /
• 2004

In this paper, we proposed the compensation structures for the enhanced directivity of CPW(Coplanar waveguide) directional couplers with finite-extent backed conductor. The proposed compensation structures are. realized by expanding the slot width between signal line and ground plane in center region of couplers. The CPW couplers with expanded slot have the same phase velocity for even and odd mode because of added inductance and changed capacitance appropriately, so the enhanced directivity is accomplished. The designed CPW directional couplers have good directivity and matching characteristic at center frequency in simulation and measurement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.568-573
• /
• 2009

This paper presents a step-down DC-DC converter with On-chip Compensation for battery-operated portable electronic devices which are designed in O.13um CMOS standard process. In an effort to decrease system volume, this paper proposes the on chip compensation circuit using capacitor multiplier method. Capacitor multiplier method can minimize error amplifier's compensation capacitor size by 10%. It allows the compensation block of DC-DC converter be easily integrated on a chip and occupy less layout area. But capacitor multiplier operation reduces DC-DC converter efficiency. As a result, this converter shows maximum efficiency over 87.2% for the output voltage of 1.2V (input voltage : 3.3V), maximum load current 500mA, and 25mA output ripple current. This voltage mode controled buck converter has 1MHz switching frequency.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.532-540
• /
• 2014

It is necessary to measure the current of rotor for controlling the active and reactive power generated by the stator side of the doubly fed induction generator (DFIG) system. There are offset and scaling errors in the current measurement. The offset and scaling errors cause one and two times current ripples of slip frequency in the synchronous reference frame of vector control, respectively. This paper proposes a compensation method to reduce their ripples. The stator current is variable according to the wind force but the rotor current is almost constant. Therefore input of the rotor current is more useful for a compensation method. The proposed method adopts the synchronous d-axis current of the rotor as the input signal for compensation. The ripples of the measurement errors can be calculated by integrating the synchronous d-axis stator current. The calculated errors are added to the reference current of rotor as input of the current regulator, then the ripples are reduced. Experimental results show the effectiveness of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.1
• /
• pp.47-53
• /
• 2012

In cellular geo-location systems, positioning performance is influenced by hearability of receivers. Hearability can be enhanced by using long integration at the receiver. When unknown residual frequency remains in baseband signals, however, the coherent integration loss increases as the residual frequency becomes larger. Consequently, length of coherent integration is determined by the residual frequency. By precise estimation and compensation of the residual frequency, integration length can be enlarged. This paper presents a residual frequency estimator for WiBro geo-location and analyzes its performance in multipath environment. By computer simulation, an optimal receiver structure to enhance the hearability of WiBro geo-location is proposed.

• Journal of information and communication convergence engineering
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2023

This paper presents a design method for a wideband bandpass filter (BPF) which compensates for frequency dependency based on the image admittance and image phase. In the proposed method, new compensation methods for the admittance and phase are integrated with the conventional method. The proposed method improves the frequency shift and reduces the unwanted bandwidth when designing more than 20% of the Fractional Bandwidth (FBW), whereas the conventional method exhibits frequency degradation at only 10% FBW. The proposed design theory was verified by applying it to both lumped elements and distributed lines through circuit simulation and measurements without an optimization process. The measurement results demonstrate improvements in the frequency shift and target bandwidth. In the future, an accurate design method based on frequency dependence can be implemented for the next-generation broadband communication system applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1225-1232
• /
• 2008

In this paper, we describe a compensation method of diurnal effect which is one of the factors giving large effect on the performance when using ground-wave signals like Loran-C for a backup and substitute navigation system of global satellite navigation system such as GPS, and currently many researches of the topics are doing in USA and in Europe. In order to compensate diurnal effect, we find periodic frequency components by using the Least Square Spectral Analysis (LSSA) method at first and then compensate the effect by subtracting the estimated compensation signal, obtained by using the estimated amplitude and phase of the individual frequency component, from the original signal. In this paper, we propose a simple compensation algorithm and analysis the performance through simulations. From the results, it is observed that the amplitude and phase can be estimated with under 5 % and 0.17 % in a somewhat poor receiving situation with 0 dB Signal to Noise Ratio (SNR). Also, we analyze the obtainable performance improvement after compensation by using the measured Loran-C data. From the results, it is observed that we can get about 22 % performance improvement when a moving average with 5 minutes interval is employed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.135-142
• /
• 2005

This paper presents an adaptive repetitive control scheme for optical disk drives to track a variable periodic reference signal. Periodic disturbances can be adequately attenuated using the concept of repetitive control, provided the period is known. Because optical disk drives support various speeds, they have the varying periodic disturbances. Based on repetitive control to change sampling frequency to follow the change of reference period, an adaptive repetitive control is proposed in order to deal with such disturbances. The proposed control consists of the repetitive controller and the frequency generator. The former uses a varying sampler operating at fixed multiple times of the disturbance frequency and the latter generates the changeable sampling frequency based on the disturbance frequency. The experimental results on the control of an optical disk drive demonstrate the effectiveness of the proposed schemes and the improvement of random access time as well.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.385-391
• /
• 2007

In this paper, we propose a frequency synchronization algorithm for S-DMT cable modem, which is practicable to the next-generation high capacity upstream physical layer in HFC networks. Analyzing several viable frequency synchronization algorithms of multicarrier systems, we proposed an algorithm using predetermined training sequence of repeated pattern in preamble field and residual frequency offset compensation with pilot signals. We verified that the simulation results of the proposed algorithm in AWGN showed good performance and suitability to the S-DMT upstream cable modem for fast frequency synchronization.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.117-122
• /
• 1995

The transfer matrix method is proposed to compensate the attachment effect of a piezo-electric impedance head. To validate the proposed method, an experiment is carried out for axial vibration of a uniform rod for which an analytical solution is known. The impedance head is attached to the test rod by a stud and is connected to the exciter. The frequency response function is mesured by applying random excitation from the electro-magnetic exciter. The frequency response function compensated by the method proposed in this research shows good agreement with the analytical solution.