• Journal of the Korea Institute of Building Construction
• /
• v.2 no.2
• /
• pp.151-156
• /
• 2002

When fresh concrete is exposed to low temperature, the concrete may suffer frost damage due to freezing at early ages and strength development may be delayed. One of the solution methods for resolve these problems is to reduce freezing temperature of concrete by the use of chemical admixture called Accelerators for freezing resistance. In this study, we investigate the effect on strength development of cement mortar using accelerators for freezing resistance with the variance curing condition. As the result of this study, the mortar using accelerators for freezing resistance show that continuously strength development in curing condition of -5$^{\circ}C$. And compressive strength under the variance temperature condition was higher than constant temperature condition in same maturity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1267-1272
• /
• 2000

When fresh concrete is exposed to low temperature, the concrete may suffer frost damage due to freezing at early ages and strength development may be delayed. These are problems on cold weather concrete. One of the solution methods for resolving these problems has been to reduce the freezing temperature of concrete by the use of chemical admixtures called Accelerators for freezing resistance. Therefore, in this study, we executed freezing temperature of mortar, setting and strength properties with using water reducing accelerator and accelerators for freezing resistance which are producted internationally. As a result of this experiment, the freezing temperature of mortar is lower and the setting property is promoted when the admixing content of accelerators for freezing resistance is increased. Moreover, the compressive strength of mortar used accelerators for freezing resistance represented the result which is similar with result of analysis of compressive strength increase with using logistic curve formula, but in the case of plain and using water reducing accelerator, there is no relation between logistic curve formula, maturity and compressive strength.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.4
• /
• pp.409-415
• /
• 1998

This study was carried out to investigate the effects of freezing temperature on quality of vacuum packaging freezed beef. In case of thaw drip loss, the freezing of -3$^{\circ}C$ and -20$^{\circ}C$ were 5.23% and 5.17% to 60 days respectively, were increased significantly during freezing. The cooking loss of water bath and pan were increased significantly during freezing than the beginning of freezing, but were no different between -3$^{\circ}C$ and -20$^{\circ}C$. The salt soluble protein extractability was decreased during freezing, the -20$^{\circ}C$ freezing was higher than -3$^{\circ}C$freezing. The water soluble protein extractability was increased during freezing higher than during freezing. The myoglobin denatured percentage of the -3$^{\circ}C$ freezing was higher than -20$^{\circ}C$ freezing, the 15 days storage of -3$^{\circ}C$ freezing was highest to 96%. The shear force value was not change during freezing, the myofibrillar fragmentation index during freezing was higher than the beginning of freezing, but was not change during freezing. The pH was decreased to freezing 45 days, after that increased.

• Culinary science and hospitality research
• /
• v.14 no.2
• /
• pp.286-292
• /
• 2008

The purpose of this study was to examine the effects of freezing and thawing methods on the quality of pork meat. The freezing methods for pork meat were the cryogenic freezing with liquid nitrogen gas, fast freezing at $-70^{\circ}C$ and normal freezing at $-20^{\circ}C$. The thawing methods were tested on low temperature thawing at refrigerative temperature($4^{\circ}C$), room temperature($20^{\circ}C$), high temperature($60^{\circ}C$) and using microwave. The quality of pork meat frozen by cryogenic methods was better than those of fast and normal freezing methods. The cooking hardness of pork meat frozen by cryogenic method showed the highest value as 1,898 g. In case of fast freezing, the hardness of pork meat was 1,472 g and that of normal frozen pork meat was 1,541 g. The high cooking hardness value of cryogenic frozen pork meat showed that the cryogenic freezing method made less freeze damage like textural softness. The drip-loss of pork meat thawed at refrigerative temperature($4^{\circ}C$), room temperature($20^{\circ}C$), high temperature($60^{\circ}C$) were shown lower than that of microwave thawing. The cooking hardness of pork meat that was thawed by microwave showed the lowest value among the thawing methods. The cryogenic freezing was the most useful freezing method for preserving quality, decreasing the freeze damage of pork meat. And thawing at refrigerative temperature was the most effective method to prevent quality loss and weight loss by drip-loss.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.5
• /
• pp.386-394
• /
• 1991

Freezing of saturated porous media contained in a rectangular cavity has been studied experimentally. Water and different diameter glass beads consitituted the liquid and porous media. Solidification front shape, the effects of bead diameter and initial liquid temperature was investigated. When the hot wall temperature was below $4^{\circ}C$, the freezing rate was higher at the top than at the bottom due to the density inversion, but with increasing the hot wall temperature the freezing rate at the top was effected by the liquid temperature and was lower than at the bottom. With increasing the bead diameter, the difference of freezing rate between top and bottom was increased and depends on thermal conductivity. When the liquid temperature was low in the beginning, the freezing rate was high, but with increasing the time almost the same with those of high temperature liquid.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1507-1516
• /
• 2020

This study analyzed the scenario for road freezing section by applying the road freezing evaluation algorithm. To apply road freezing algorithm, the influencing factors on road freezing were reviewed. Observation data from four points, Mokgam IC, Jeongneung tunnel, Seongsan bridge, and Yeomchang bridge were used for analysis. All observatories are installed on the expressway, and they are classified for the analysis of road freezing characteristics. When the difference between the road surface temperature and dew-point temperature of the road freezing evaluation algorithm was 3℃ or less, the section where road freezing occurred was checked. In addition, road freezing evaluation was derived through the change of the road surface condition and water film thickness of the freezing section.

• Geomechanics and Engineering
• /
• v.32 no.3
• /
• pp.293-305
• /
• 2023

To ensure the safety of underground infrastructures, ground can sometimes be first treated by cement slurry and then stabilized using artificial ground freezing (AGF) technique before excavation. The hydration heat produced by cement slurry increases the soil temperature before freezing and results in an extension of the active freezing time (AFT), especially when the Metro Jet System (MJS) treatment is adopted due to a high cement-soil ratio. In this paper, by taking advantage of an on-going project, a case study was performed to evaluate the influence of MJS and AGF on the ground temperature variation through on-site measurement and numerical simulation. Both on-site measurement and simulation results reveal that MJS resulted in a significant increase in the soil temperature after treatment. The ground temperature gradually decreases and then stabilized after completion of MJS. The initiation of AGF resulted in a quick decrease in ground temperature. The ground temperature then slowly decreased and stabilized at later freezing. A slight difference in ground temperature exists between the on-site measurements and simulation results due to limitations of numerical simulation. For the AGF system, numerical simulation is still strongly recommended because it is proven to be cost-effective for predicting the ground temperature variation with reasonable accuracy.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.5
• /
• pp.482-487
• /
• 1998

This study was carried out to investigate the effects of freezing temperature on quality of thawed beef loin. In case of thaw drip loss, the freezing of -3$^{\circ}C$ and -2$0^{\circ}C$ were higest by 3.4% to 30 days and by 1.8% to 60 days, respectively. And the thaw drip loss of -3$^{\circ}C$ freezing was more than -2$0^{\circ}C$ freezing. The cooking loss of water bath and pan boiling were increased significantly during freezing than the beginning of freezing, but were not different -3$^{\circ}C$ and -2$0^{\circ}C$. The salt soluble protein extractability was decreased during freezing, the -2$0^{\circ}C$ freezing was higher than -3$^{\circ}C$ freezing. The water soluble protein extractability of -3$^{\circ}C$ freezing was not significant different during freezing storage, that freezed at -2$0^{\circ}C$ was increased during freezing. The "L" value of the beginning of freezing was higher than during freezing, the "a" value was not different during freezing, and the "b" value during freezing was higher than the beginning of freezing. The myoglobin denatured percentage of the -3$^{\circ}C$ and -2$0^{\circ}C$ freezing were highest by 94.4% to 45 days and by 94.0% to 15 days, respectively. The shear force value during freezing was higher than the beginning of freezing, the myofibrillar fragmentation index was not significant different during freezing. The pH was increased to freezing 30 days, after that was decreased.ays, after that was decreased.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.959-969
• /
• 2018

This study investigated the effects of deep freezing and storage temperature ($-50^{\circ}C$, $-60^{\circ}C$, and $-80^{\circ}C$) on the quality and freshness of lamb. To compare the qualities of deep frozen and stored lamb, fresh control and normal freezing conditions ($-18^{\circ}C$) were adopted. As quality and freshness parameters, drip loss (thawing loss and cooking loss), water-holding capacity (WHC), texture profile analysis (TPA), thiobarbituric acid reactive substances (TBARS), and total volatile basic nitrogen (TVBN) were evaluated during 5 months of storage. Temperature influenced the drip loss and WHC, and deep freezing minimized the moisture loss during frozen storage compared to the normal freezing condition. Lamb frozen and stored at deep freezing temperature showed better tenderness than that stored in normal freezing conditions. In particular, lamb frozen at lower than $-60^{\circ}C$ exhibited fresh lamb-like tenderness. Regardless of temperature, evidence of lipid oxidation was not found in any frozen lamb after 5 months, while TVBN was dependent on the applied temperature. Therefore, this study demonstrated that deep freezing could potentially be used to maintain freshness of lamb for 5 months. From the quality and economic aspects, the freezing and storage condition of $-60^{\circ}C$ is estimated as the optimum condition for frozen lamb.

• Food Science of Animal Resources
• /
• v.18 no.2
• /
• pp.164-175
• /
• 1998

The objective of this study was to investigate the effects of freezing rate on ice crystal size and freeze-drying rate. Our experiments were carried out with self-manufactured freeze-dryer. Gelatin gels (2% w / w, 80$\times$20mm) were frozen unidirectionally (Neumann's model) from the bottom at -45, -30, -20, and -15$^{\circ}C$ and followed with freeze-drying. Under the upper conditions we measured freezing rate and the change of temperature and pressure during freeze drying. Freeze-dried gelatins were cut horizontally into 5 mm thickness from the bottom and measured their pore sizes. Also freeze-drying rate(primary drying) is estimated by measuring the temperature of sample and pressure of vacuum chamber. During freeze-drying, profiles of pressure and temperature were shown constant tendency regardless of freezing temperature and we could expect the end-point of freeze drying by considering pressure and temperature together. In temperature profiles, the point which temperature increased significantly was observed during freeze-drying. There is no relationship between freeze temperature and drying rate of primary drying in our model system. As freezing temperature increased, ice crystal size(X*) which correspond to 63.2% of cumulative frequency was increased and at the same freezing temperature ice crystal size(X*) was decreased with distance from the bottom of the sample. Freezing conditions have a strong influence on the quality of the final freeze-dried products in freeze-drying system.