• Journal of the Korean Geotechnical Society
• /
• v.37 no.12
• /
• pp.107-116
• /
• 2021

In this study, a set of laboratory liquefaction test has been conducted using undisturbed samples collected from Songlim-park, Pohang where liquefaction phenomenon had been observed in 2017. Soil samples were frozen right after tube sampling to minimize the disturbances during transport, storage, and test preparation. Cyclic triaxial test has been carried out to evaluate the liquefaction resistance ratio of undisturbed soil samples. As a result, the liquefaction resistance ratio of samples collected from 8.0~8.8 m and 11.0~11.8 m were almost similar, and these values were approximately 0.04~0.07 larger than values estimated by simplified assessment method using field test results. It is expected that the application of undisturbed sample for the evaluation of liquefaction resistance could contribute to the economical design of geotechnical structures.

• Restorative Dentistry and Endodontics
• /
• v.46 no.2
• /
• pp.26.1-26.15
• /
• 2021

Objectives: The aim of the present systematic review was to investigate the cryopreservation process of dental pulp mesenchymal stromal cells and whether cryopreservation is effective in promoting cell viability and recovery. Materials and Methods: This systematic review was developed in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement and the research question was determined using the population, exposure, comparison, and outcomes strategy. Electronic searches were conducted in the PubMed, Cochrane Library, Science Direct, LILACS, and SciELO databases and in the gray literature (dissertations and thesis databases and Google Scholar) for relevant articles published up to March 2019. Clinical trial studies performed with dental pulp of human permanent or primary teeth, containing concrete information regarding the cryopreservation stages, and with cryopreservation performed for a period of at least 1 week were included in this study. Results: The search strategy resulted in the retrieval of 185 publications. After the application of the eligibility criteria, 21 articles were selected for a qualitative analysis. Conclusions: The cryopreservation process must be carried out in 6 stages: tooth disinfection, pulp extraction, cell isolation, cell proliferation, cryopreservation, and thawing. In addition, it can be inferred that the use of dimethyl sulfoxide, programmable freezing, and storage in liquid nitrogen are associated with a high rate of cell viability after thawing and a high rate of cell proliferation in both primary and permanent teeth.

• Journal of Food Hygiene and Safety
• /
• v.24 no.3
• /
• pp.217-225
• /
• 2009

The study was conducted to evaluate the effect of drying, curing and freezing on the quality of beef. Three types of dried (without salt = $T_1$, with salt = $T_2$ and salt + spices = $T_3$); three types of cured (salt curing = $T_4$, sugar curing = $T_5$ and brine curing = $T_6$) and three types of frozen beef ($0^{\circ}C=T_7^{\circ}C$, $-10^{\circ}C=T_8$ and $-20^{\circ}C=T_9$) were analyzed at different time intervals up to the period of 180 d. Parameters studied were protein, fat, ash, color and cooking loss of beef. All the chemical constituents (protein, fat and ash) were decreased gradually up to 120 d. The decreasing trend was observed rapid after 120 d up to 180 d of preservation. Highest protein loss was found in $T_7$ (11.1 %) and the lowest protein loss was found in $T_6$ (3.85%) in 180 d preservation and significant (p < 0.01) differences were observed among the different preservation methods. Highest fat loss was observed in $T_6$ (7.62%) and the lowest fat loss was observed in $T_2$ (3.18%) and the differences were also significant (p < 0.05) among different methods during the experimental period. Spices dried beef showed a brighter color than others and cured beef showed brown color and the intensity of color was reduced gradually with the increasing of storage period. $T_9$ showed the lowest cooking loss among 3 treatments of frozen beef and the differences also significant (p < 0.01) up to 180 d. It might be stated that sugar curing ($T_5$) and spices drying ($T_3$) would be the useful technique of meat preservation in rural areas and freezing ($T_9$) would be used in large scale preservation at urban areas.

• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.207-216
• /
• 2013

This study was conducted to establish the method for preserving PGCs that enables long-term storage in liquid nitrogen for developmental engineering or preservation of species. The purpose of this study is to clarify the effects of freeze-thaw treatment on viability of PGCs in chickens. PGCs were collected separately from a germinal gonad of an early embryo of 5.5~6 day (stage 28) of Isa brown, Korean Oge (KO), White Leghorn and Commercial breeds. PGCs separated from a germinal gonad of an early embryo of 5.5~6 day (stage 28) are suspended in a freezing medium containing a freezing and protecting agents (e.g. dimethyl sulfoxide (DMSO), ethylene glycol (EG) and glycerol). The PGCs were then purified using magnetic activated cell sorting (MACS) method. The viability of PGCs after thawing was $87.4{\pm}0.4%$ and $89.4{\pm}0.2%$ with the 10% EG treatments with no significant difference between the Isa brown and Commercial breeds. The viability of PGCs after freeze- thawing was significantly higher for Isa brown ($87.4{\pm}0.4%$) and Commercial breeds ($89.4{\pm}0.2%$) than Korean Oge (KO) ($77.6{\pm}1.1%$) and White Leghorn ($76.2{\pm}0.9%$)(p<0.05) using 10% EG cryoprotectant. This study established a method for pre- serving chicken PGCs that enables systematic storage and labeling of cryopreserved PGCs in liquid ($LN_2$) at agermplasm repository and ease of entry into a data base. In the future, the importance for this new technology is that poultry lines can be conserved while work is being conducted on improving the production of germline chimeras.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.426-434
• /
• 2009

This study was carried out to derive the most optimal production process for the wood fuels(chip and pellet), by collecting cost data on each procedure through the life cycle assessment approach, and to compare between the profitability and efficiency, from the view points of producers and consumers, irrespectively. The costs accounted in this analysis were based on the opportunity cost. The results show that wood chips are cheaper than wood pellets in production costs. In respect to the process with the lowest production cost, while wood chips should be to crush collected residues into pieces on the spot for merchandizing, wood pellets need to be transported to manufactory for pelletizing. The study findings also include that the profits, which is estimated by subtracting expenses from gained sale revenue, were a bit higher for wood chips than wood pellets. Additionally, the price ratio of wood pellets to wood chips for getting the same caloric value appears to be 1.27. Despite of economic benefits of processing wood chips, there are several problems in practice. For producers, there is a possible increase in not only transportation cost for conveying crushers to the dispersed places, but storage cost due to the lack of the marketplaces in the immediate surroundings. For consumers, on the other hand, there are some challenging issues, such as bulky storage facility requirement, additional labor for fuel supplement, frequent ashes disposal, and decomposition in summer and freezing in winter caused by wood chips' own moisture.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.200.2-200.2
• /
• 2010

This study was carried out in order to reduce the amount of underground water which is used in the water curtain system for retaining heat. To proceed to the research, two plastic green houses of water curtain system were installed. One was equipped of internal small tunnel for keeping warm air in the interior of the house. Then the internal small tunnel for keeping warm air was fitted with PVC duct of 50cm in diameter filled with subsurface water. Storing surplus solar energy in the water filled in PVC duct was the method used to this house. Another was installed with FCU in the middle of the house, and was fitted a circulation motor in water tank for heat storage which was operated from 10 a.m. to 4 p.m. in order to interchange heat with FCU. The latter was installed with four FCUs which has a capacity of 8000kcal per hour. Consequently about 5 degrees celsius could be maintained in the interior of the internal small tunnel for keeping warm air with the external temperature of more than minus 5 degrees celsius. It appeared that the alteration of an internal temperature of the house was flexible depending on the sunlight during daytime. It happened that to prevent the water from freezing, mixing antifreezing liquid in the flowing water of FCU or changing the operating method of FCU was a suitable measure. Also, in order to use the surplus solar thermal energy on plastic green house of water curtain system efficiently, storing the surplus heat during daytime simultaneously finding a method of using water curtain systematic underground water happened to be important. As a result of this research, when the house's interior temperature is below zero the operation of FCU appeared to be impossible. Therefore when supposed that the amount of water used in the house is 150~200ton for stable operation of FCU, using the system mentioned in the above research happened to be appropriate of reducing the amount of subsurface water from 80% to 100% when maintaining the interior of internal small tunnel's temperature for keeping warm air of 5 degrees celsius at the extreme temperature of minus 5 degrees celsius.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.116-119
• /
• 2009

Background: Preanalytical factors can affect reliability of hormone assay results. Adrenocorticotropic hormone (ACTH) in blood is considered highly unstable because of proteolytic degradation, so storage of blood samples on ice until analysis is recommended. In clinical practice, however, this procedure may present logistical problems because most samples for ACTH measurement must be shipped from the place of sample collection to the laboratory. Therefore, we studied the impact of time and temperature before plasma separation and analysis on the results of ACTH assays. Methods: A total number of 22 patients were enrolled in this study. We obtained 2 blood samples. ACTH concentrations were 35~126 pg/mL. ACTH concentrations were measured by immunoradiometric assay (IRMA) using commercial kits (CIS Biointernational, Gif-sur-Yvette, France). Results: ACTH levels showed a significant difference between the samples of $22^{\circ}C$ EDTA and $4^{\circ}C$ EDTA. Measured ACTH concentrations significantly decreased with time before freezing at $-20^{\circ}C$. ACTH levels showed no significant difference between the groups of after storage for 24 hr without centrifugation at $22^{\circ}C$ and $4^{\circ}C$. Conclusion: We recommend that blood samples be obtained on pre-chilled EDTA collection tubes. The shortest possible time between sample collection and processing is always the best laboratory practice.

• Reproductive and Developmental Biology
• /
• v.33 no.4
• /
• pp.257-262
• /
• 2009

This study was to investigate pregnancy rate of IVM/IVF/IVC Korean cattle (registered in government) embryos according to transport time course. For the production of embryos, oocytes recovered from slaughtered excellent grade cow and highly motile frozen-thawed bull semen (purchased from LIMC, KPN#497) was used. In vitro produced embryos were cultured in CR1aa medium for 8 days and some of them were frozen. The rate of average cleavage (>2-cell) was 83.0% (308/371) and blastocyst rate at day 8 was 34.7% (107/308). Among in vitro produced blastocyst embryos at day 8, most healthy embryos were freshly transferred on production day and some frozen embryos were direct transferred on appropriate day. These embryos were produced in a laboratory, embryo transfer (ET) was planned in 10 areas of the remote island (Jeju) from the laboratory by airplane. Thus, we examined the pregnancy rate in recipient cow according to embryo of transport time course before ET. From embryo transferred 44 recipient cows, overall pregnancy was 40.9% (18/44), these 18 cows were all calved [single, 94% (17/18); twin, 6% (1/18)] and total embryo implantation rate was 26% (19/66). Comparing transport time in the base of 6 hr, pregnancy rate in ET group required less 4 hr (60%, 9/15) was significantly higher than that required more 6 hr (26.3%, 5/19). In direct ET of freezing embryos, the pregnancy rate was 40% (4/10). However, it was difficult to find the meaning of temperature, pH and corpus luteum quality of recipients on comparison of pregnancy rate. When the cell death level of embryos according to storage time in thermos (straw container) before ET was measured by TUNEL staining, apoptotic index was increased with storage time-dependent. These results demonstrated that long distance transfer of IVM/IVF/IVC embryos is possible and the time of embryo transport is very important for the pregnancy rate on field trial.

• Journal of Animal Science and Technology
• /
• v.51 no.2
• /
• pp.163-170
• /
• 2009

Colostrum provide a complete diet for the newborn calves. In ruminants, colostrum is also the sole source of initial acquired immunity for the offspring. Colostrum, therefore, plays an important role in ruminants host defense. Bovine colostrum imparts passive immunity to newborn calves during the first 24h of life and generally has been fed for the first 3 days after birth. Colostrum can be preserved conveniently for future use by brief refrigeration, freezing, or storage at ambient temperatures (fermentation or chemical treatment). Colostrum management were surveyed via data collection from 67 dairy farms in Gyeonggi and Chungnam provinces. After parturition for five days the total amount of produced colostrum was 80.4 kg on average, and the average amount of lactation fed to a calf was 20.9 kg. According to the survey results, identified treatment methods for surplus colostrum are as follows; disposal 17.9%, other calf feeding 37.3%, storage 22.4%, other livestock feeding 20.9% and other treatment 1.5%. For improvement in the quality of colostrum, there must be controlled usage of medicines (such as antibiotics) before and after parturition, proper choices of milk-drying agents, and increased milking yields during the early stage of the milking period.

• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.217-222
• /
• 2011

This study was carried out in order to reduce the amount of underground water which is used in the double layered single span plastic greenhouse for retaining heat. For this research, two plastic green houses of the double layered single span plastic greenhouse were installed. There was equipped of internal small tunnel for keeping warm air in the interior of the house. Then the internal small tunnel for keeping warm air was fitted with PVC duct of 50 cm in diameter filled with subsurface water. The surplus solar energy in the greenhouse was stored in the water in the PVC duct. Four FCUs (Fan Coil Unit), which has the capacity of 8,000 kcal per hour, were installed in the middle of the house, and a circulation motor in heat storage water tank was operated from 10:30 a.m. to 16:00 p.m. in order to circulate water between the water tank and the FCUs. Consequently about 5 degrees celsius could be maintained in the interior of the internal small tunnel for keeping warm air with the external temperature of lower than minus 5 degrees celsius. It appeared that the alteration of an internal temperature of the house was flexible depending on the sunlight during daytime. To prevent the water freezing, mixing antifreezing liquid in the water or operating FCU continuously was needed. Also, in order to use the surplus solar thermal energy on plastic green house of water curtain system efficiently, storing the surplus heat during daytime simultaneously finding a method of using water curtain systematic underground water happened to be important. As a result of this research, when the house's interior temperature is below zero the operation of FCU appeared to be impossible. Considering the amount of water used in the house with water-curtain-heating system is 150~200 ton per day, using the system mentioned in this research showed that reducing the underground water more than 80% in order to maintain the internal temperature as the level of 5 degree celsius at the extreme temperature of minus 5 degrees celsius.