• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.1
• /
• pp.89-97
• /
• 2009

Jujube wine was treated with hydrostatic pressure (500 MPa, 5 min) or freezing ($-20^{\circ}C$, 3 days and thawed $20^{\circ}C$, 4 hr) and their microbial counts, physicochemical properties, and sensory characteristics were investigated during storage at $35^{\circ}C$ for 60 days. Microorganisms in pressure-treated jujube wine were not detected during the whole period and chemical compositions as well as color were slightly changed. Sensory quality was significantly preserved until 20 days without increasing sweet aroma and taste. In freezing-treated wine, bacterial counts were decreased after 10 days and remained below 10 CFU/mL while lactic acid bacteria and yeast were not detected. Changes of chemical composition were smaller than those of the untreated wine but bigger than those of the pressure-treated or heat-treated wine. Instrumental color was changed after $10{\sim}20$ days resulting from the increase of L value and the reduction of a value. Sensory quality was significantly similar with the fresh wine for 10 days, suggesting that pressure treatment would be the most effective sterilization method to improve the shelf life of jujube wine whereas freezing treatment would be insufficient.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.2
• /
• pp.105-110
• /
• 2003

This study was conducted to investigate the effect of freezing methods, slow freezing at $-20^{\circ}C$ and rapid freezing at $-70^{\circ}C$, on physical properties of Chinese cabbage in frozen Kimchi during storage at $-20^{\circ}C$. Elasticity of midrib of Chinese cabbage in frozen Kimchi was decreased until 15 days and did not changed thereafter during storage at $-20^{\circ}C$. Hardness of that was not changed during storage. Those results of elasticity and hardness of slow frozen sample are similar to rapid frozen sample. By the morphological observation through transmission electron microscope, more of cellular structure of Chinese cabbage in slow frozen was destructed than that of rapid frozen sample. Drip loss was more in slow frozen sample than that in rapid one.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.51-56
• /
• 2000

The Finite Element Solutions Is reported on solid-liquid phase change in porous media with natural convection including freezing. The model is based on volume averaged transport equations, while phase change is assumed to occur over a small temperature range. The FEM (Finite Element Method) algorithm used in this study is 3-step time-splitting method which requires much less execution time and computer storage the velocity-pressure integrated method and the penalty method. And the explicit Lax-Wendroff scheme is applied to nonlinear convective term in the energy equation. For natural convection including melting and solidification the numerical results show reasonable agreement with FDM (Finite Difference Method) results.

• Journal of Embryo Transfer
• /
• v.10 no.3
• /
• pp.243-250
• /
• 1995

Frozen storage of the oocytes has been used in a few mammalian species including mouse, hamster, human and cattle. However, frozen4hawed oocvtes show different sperm penetration on the levels of the zona pellucida and the plasma memhrane when compared with fresh oocytes. To elucidate biological changes occurring during freezing and thawing, we examined the kinetics of sperm penetration into frozen-thawed hamster oocytes. Oocytes obtained from superovulated female golden hamsters were frozen-thawed in an autofreezer according to an established method. Fresh and frozen4hawed oocytes were fertilized in vitro with capacitated hamster spermatozoa after removing the zona pellucida. The oocytes were examined at 1, 2, 3 and 6 h postinsemination. Sperm penetration found to be 1 h delayed in frozen-thawed oocytes. Other parameters such as degree of polyspermy and decondensing sperm heads were not affected by freezing and thawing. The results suggest that freezing and thawing may cause changes in the egg membrane surface and subsequently which leads to delay in the sperm-egg fusion.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.799-806
• /
• 2011

This study was conducted to evaluate the effect of the aging period prior to freezing on the meat quality of Hanwoo longissimus dorsi (LD) muscle. Three different combinations of aging and freezing periods (0/90, 20/70, and 40/50) were examined using LD muscle at 24 h postmortem under an identical storage time of 90 d. The pH and lightness slightly increased with increasing aging period. However, there were no significant (p>0.05) differences in redness and yellowness. The solitary freezing treatment (0/90) had the significantly (p<0.05) lowest moisture content. The un-aged treatment had a significantly (p<0.05) higher total loss than the aged treatments due to an increase in thaw drip loss. The aging significantly improved the myofibrillar fragmentation index and shear force of Hanwoo LD muscle (p<0.05). In addition, the aged treatments produced a higher flavor, tenderness, juiciness, and overall acceptability relative to un-aged treatment. However, there was no significant (p>0.05) difference in shear force and sensorial properties between 20 and 40 d aging prior to freezing. Therefore, 20 d aging prior to freezing may be a sufficiently effective strategy to improve the tenderness and sensorial properties of Hanwoo LD muscle.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.341-348
• /
• 2000

Effects of different types of sub-freezing methods on quality of raw pork loin, beef loin and tuna were studied. Storage tests were undertaken as follows; the three different types of sub-freezing methods, such as regular cold chamber at $-1^{\circ}C$, air-blast sub-freezing at $-5^{\circ}C$ and sharp-plate sub-freezing at $-5^{\circ}C$, were evaluated for extending freshness of samples. Pork loin packed with polyethylene-film showed no significant differences (P<0.05) in physico-chemical properties among the above sub-freezing methods. Air-blast sub-freezing methods revealed faster evaporation of moisture from samples. The same sub-freezing method also showed increased VBN values of pork loin and tuna samples. Regular cold chamber resulted in increased TBA values and K values of beef loin and tuna, respectively. It appeared that sharp-plate freezing system kept the food samples with the least loss of freshness among the above three sub-freezing methods. These results indicated that freshness of raw pork, beef and tuna could be significantly extended by the sharp-plate sub-freezing method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.5
• /
• pp.738-744
• /
• 2008

In most developing countries consumers purchase retail cuts from hot carcasses and prepare traditional meat products as per their convenience and requirements. In this study, effects of different post mortem handling practices on quality of meat curry from culled sheep meat have been studied. After slaughter, leg cuts were subjected to nine commonly prevalent handling conditions in India viz. deboning (boning out) and cooking within 2-3 h (1), deboning immediately and cooking after 5-6 h (2), deboning after 5-6 h and cooking (3), deboning immediately, storage at $4^{\circ}C$ for 24 h and cooking (4), chilling for 24 h at $4^{\circ}C$, deboning and cooking (5), deboning after 5-6 h, storage for 24 h at $4^{\circ}C$, and cooking (6), deboning after 5-6 h, storage for 48 h at 4??C and cooking (7), deboning after 5-6 h, freezing and cooking (8), deboning after 5-6 h, storage for 24 h at $4^{\circ}C$, freezing and cooking (9). Significant differences were observed in pH, water-holding capacity, cooking loss and shear force values. Sensory scores were significantly higher in conditions (1), (5) and (9), and significantly lower in conditions (4) and (6). From the results, it was concluded that, to have the best quality product, meat should be cooked either immediately after slaughter or should be deboned just before cooking. Storage of deboned meat at refrigerated temperature must be avoided.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.161-167
• /
• 2006

The purpose of this study is to find the optimal conditions of PCM slurry manufacturing equipment for saving the marketing cost and keeping the original quality of products. In addition, the characteristics of the movable container for shipping or distributing products is analysed. The major results are as follows. 1. PCM thermal storage system is designed with the conditions of temperature($-5{\sim}10^{\circ}C$), cold chain time(30 minutes), and one time usage(50 liter). This system includes tank, freezer, circulating pump, cycle type heat exchanger, swelling tank, equipment of supplying PCM supplying unit includes cold tank, cycle type heat exchanger, suction unit and control equipments, etc. 2. After ability test of PCM thermal storage system, it shows that the required freezing time of PCM thermal storage system is less than one of the previous system. The reason is that churn (top and bottom) and compulsion circulation are occurred simultaneously and unit cooler type method is better than chiller type method. 3. By the experiment of transportation latent heat container, it is decided that the best container is $K_1$ with latent heat temperature($0{\sim}5^{\circ}C$) and density(0.15%). However, for $K_l\;and\;K_2$, it is necessary more studies on latent heat thermal conditions and conditions of making method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.862-872
• /
• 1997

Ice formation in a horizontal circular cylinder has been studied numerically. From the numerical analysis results, it was found that there were three types of freezing pattern and that freezing phenomenon was affected largely by density inversion and cooling rate. The type of freezing pattern largely depends on the secondary flow which is generated by density inversion. When supercooling energy is released before the development of the secondary flow, the annular ice layer grows. If the energy is released when the secondary flow is considerably developed and the supercooled region is removed to the upper half part of the cylinder, an asymmetric ice layer grows. And if the energy is released after perfect development of the secondary flow, instantaneous dendritic ice formation over the full region occurs. Furthermore, this secondary flow was found to have an effect on heat transfer characteristics. The heat transfer rate becomes small at the instant when the secondary flow is generated, but becomes large with the development of the flow. It's concluded that for the facilitation of heat transfer it is desirable to keep water in liquid phase until the secondary flow is perfectly developed. This study gave an instruction of performance improvement of capsule type ice storage tank.

• Solar Energy
• /
• v.13 no.2_3
• /
• pp.53-64
• /
• 1993

This study investigated heat transfer phenomena during the freezing of an initially superheated or non-superheated liquid in a cooled cylinder tube. Numerical and experimental method were performed to obtatin the temperature and velocity distribution, the shape of interface. Natural convection effects in the superheated liquid were confined and moderated a short freezing time. After natural convection ceases, heat conduction dominated in the whole paraffin, so Crystal and much-zone were found out in PCM. Initial superheating of liquid tended to morderatly diminish the frozen layer thickness at short freezing times but little effect on the these quantities at longer times. On the amount of frozen mass, Iintial liquid superheating is less affected than tube wall subcooling.