• 한국식품영양과학회지
• /
• 제21권2호
• /
• pp.207-212
• /
• 1992

식품의 동결장치 설계 및 최적조작조건의 설정을 위해 필요한 식품중의 온도분포, 동결시간, 동결계면의 이동속도의 측정을 위하여 기존의 모델과 3단계동결 모델(3단계 수치계산모델)을 식품에 적용한 결과는 대략 다음과 같다. 1. Neumann왜와 체적변화를 고려한 Neumann해는 물의 경우 거의 일치하여 동결에 따른 체적팽창은 큰 영향이 없으며, 중간상을 고려한 Weiner때가 Neumann해보다 빠른 냉각속도를 나타내었다. 2. 체적팽창을 고려한 Neumann해를 물, 2% 한천겔, 20% 젤라틴 겔, 돈육에 적용시킨 결과, 결합수의 영향을 무시할 수 있는 물과 2% 한천겔에 잘 적용되었다. 또한, 잠열분산형 모델인 Weiner 해에는 결합수가 각각 16%, 23%로 그 값이 상대적으로 높은 젤라틴 20%겔과 돈육에 잘 적용되었으며, 돈육의 경우 중간상은 $0^{\circ}C$~-7$^{\circ}C$로 고려 할 때 실측치와 잘 일치하였다. 3. 3단계동결모델을 이용한 수치 해석해를 물과 20% 제라틴겔에 적용시킨 결과, Neumann해가 Weiner해보다 양호한 적용성을 보였다. 4. 이상과 같은 3단계동결모델에 의한 수치해는 수분의 존재상태 및 과냉각현상등의 문제를 포함한 식품의 동결현상을 기술하기에 그 범용성과 정도가 높은 모델임이 판명되어 금후에 상기 연구를 바탕으로 초기온도와 동결매체온도의 변화에 따른 빙결정의 크기 및 동결시간과 최대빙결정생성대 통과시간의 상관관계를 추정할 수 있다면 식품의 동결중 동결장치의 설계 및 최적조작조건의 설정이 가능하리라 사료된다.

• 동력기계공학회지
• /
• 제7권2호
• /
• pp.17-22
• /
• 2003

As side-by-side refrigerators came into existence, there has been a growing concern about the free%ins-up of the vital equipment in a walk-in freezer. Due to a bad performance, customers are experiencing too much frustration. In order to minimize the freezing phenomena, the numerical simulation has been performed on the characteristics of cold air flow in a side-by-side refrigerator. The flow field has been simulated with a standard $k-\varepsilon$ turbulent model and a SIMPLE algorithm based on the finite volume method. Through the results of the analysis of the pattern of cold air flow, finally the shape of outlet for cold air flow was modified. The present model was compared with the modified model. The latter was better than the former in minimizing the freezing phenomena.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.366-372
• /
• 2001

The ice plugging process consists of placing liquid nitrogen around a pipe and removing heat until the water in the pipe freezes and provides a solid plug or seal against fluid movement. This technique enables us to repair or inspect a pipe system without shutdown of entire system. A set of test apparatus for investigation of the liquid freezing phenomena during ice plugging is prepared. This study shows the characteristics of the liquid freezing and the heat transfer with various pipe and freezing jacket conditions. And in case there is flow of the fluid inside the pipe, the flow rate which can be able to form the ice plug is identified with the effect of the pipe diameter and freezing jacket length on the plug formation. The permissible maximum flow rate for the complete plug formation is approximately proportional to the freezing jacket length at the same pipe diameter condition.

• 설비공학논문집
• /
• 제9권4호
• /
• pp.435-445
• /
• 1997

It was studied the phenomena of transient freezing of an inclined water-saturated enclosure. One side of the test section was cooled and the other sides were insulated. The effects of the initial temperature, the inclination angle on the temperature field and the shape of the ice-water interface were observed. In the beginning of freezing, with increasing the inclination angle the freezing rate was increased and in the stable density layer centered $4^{\circ}C$, the freezing was fast as the convective fluid flow became small. When the initial temperature was above the $4^{\circ}C$, the frozen thickness in the upper part of inclined surface was thinner than that in the lower part, but with time the frozen thickness of upper part was thicker than that of lower part, below the $4^{\circ}C$, the frozen thickness in the upper part was thicker than that of lower part from the begining, and above the $8^{\circ}C$ in the beginning upper part was thinner with concave, but with time thicker the upper part, vanishing concave.

• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.240-248
• /
• 2024

The purpose of this study is to investigate the freezing phenomena in printed circuit heat exchanger (PCHE) for cryogenic liquid hydrogen vaporizer. Local freezing phenomena in hot channels should be avoided in designing PCHE for cryogenic liquid hydrogen vaporizer. Hence, the flow and thermal characteristics of PCHE is experimentally investigated to figure out the conditions under when freezing occurs. To conduct lab-scale PCHE experiment, liquid nitrogen is used as a working fluid in cold channels instead of using liquid hydrogen. Glycol water is used as a working fluid in hot channels. Based on the experimental data, ratio between mass flow rates of cold channels and that of hot channels is proposed as contour map to avoid the freezing phenomena in PCHE.

• 설비공학논문집
• /
• 제8권4호
• /
• pp.451-462
• /
• 1996

In this study, which focuses on ice storage, a fundamental study in cooling and solidification was performed, including the interesting phenomena of density inversion, supercooling and dendritic ice. A numerical study was performed for natural convection and ice formation considering existence of subcooling and dendritic ice were analyzed numerically by using finite difference method and boundary fixing method. In the mesh, the solid fraction was introduced with adding as a term to the energy conservation equation. A flow in the dendrite was modelled as a flow in a porous medium, and the momentum conservation equation was modified to incorporate resistance forces involved in flows through porous media. A numerical solution of the time dependencies of dendrite area and dense ice front was successfully obtained, and the numerical results were good agreement with experimental results. Based on this methodology, a discussion was made of phenomena and characteristics of cooling and freezing processes under various conditions.

• 동력기계공학회지
• /
• 제13권4호
• /
• pp.5-10
• /
• 2009

Urea-SCR system, the selective catalytic reduction using urea as reducing agent, is a powerful technique to reduce nitrogen oxides(NOx) emitted from diesel engines. However, a tank of urea(32.5 wt%)-water solution can be frozen in low ambient temperature levels of below $-11^{\circ}C$. The purpose of this study is to understand freezing and melting phenomena of the urea-water solution, and its can be applied to get the urea-water solution from frozen it within 5 minutes after cold start. Factors considered were the type of heater and the urea tank shape. From the results, it was found that melting volume of cartridge heater B during 5 minutes of heating period was 83ml when supplying electric power of 150W. Horizontal heater B, which was put in the narrow bottom space of the tank T1, had fast melting characteristics.

• 설비공학논문집
• /
• 제3권5호
• /
• pp.386-394
• /
• 1991

Freezing of saturated porous media contained in a rectangular cavity has been studied experimentally. Water and different diameter glass beads consitituted the liquid and porous media. Solidification front shape, the effects of bead diameter and initial liquid temperature was investigated. When the hot wall temperature was below $4^{\circ}C$, the freezing rate was higher at the top than at the bottom due to the density inversion, but with increasing the hot wall temperature the freezing rate at the top was effected by the liquid temperature and was lower than at the bottom. With increasing the bead diameter, the difference of freezing rate between top and bottom was increased and depends on thermal conductivity. When the liquid temperature was low in the beginning, the freezing rate was high, but with increasing the time almost the same with those of high temperature liquid.

• 한국축산식품학회지
• /
• 제36권5호
• /
• pp.650-655
• /
• 2016

This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4℃ for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4℃. Despite that SSF was conducted with the same method with SAF, application of artificial supercooling accelerated the phase transition (traverse from -0.6℃ to -5℃) from 3.07 h (SAF) to 2.23 h (SSF). The observation of a microstructure indicated that the SSF prevented tissue damage caused by ice crystallization and maintained the structural integrity. The estimated quality parameters reflected that SSF exhibited superior meat quality compared with slow freezing (SAF). SSF showed better water-holding capacity (lower thawing loss, cooking loss and expressible moisture) and tenderness than SAF, and these quality parameters of SSF were not significantly different with ultra-fast freezing treatment (EIF). Consequently, the results demonstrated that the generation of supercooling followed by conventional freezing potentially had the advantage of minimizing the quality deterioration caused by the slow freezing of meat.

• 한국결정학회지
• /
• 제12권3호
• /
• pp.157-161
• /
• 2001

Pb계 완화형 강유전체인 Pb(Mg/sub ⅓/Nb/sub ⅔/O₃계에서 relaxation 현상과 freezing 거동을 살펴보기위해 낮은 전계에서 측정된 물성들과 강전계 하에서 측정된 물성들을 다양한 주파수 범위에서 비교분석하였다. -40∼90℃의 상전이 온도범위에 걸쳐 1 V/mm의 낮은전계에서 측정된 유전특성의 온도의존성을 구하고 유전이력곡선의 기울기로부터 계산된 유전상수의 온도의존성을 관찰하였다. 이상의 결과와 함께 초전 전류의 온도의존성을 검토한 결과 Vogel-Fulcher 관계식에 비교적 잘 일치되었다. 본 연구를 통하여 일정한 경향을 나타내는 freezing 온도를 산출할 수 있었다.