• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.512-515
• /
• 2019

Overhead contact systems (OCS) consist of contact and messenger wires, in which the contact wire supplies electric energy to the railway vehicle by contacting a pantograph. However, this mechanical contact is interrupted during frosts or temperatures below $0^{\circ}C$ in the winter. In these conditions, railway vehicle accidents can occur during operation because of the low energy efficiency that results from the increase in the arcing between the contact wire and pantograph. Therefore, the detection of frost or freezing temperatures is necessary to maintain the stable operation of these trains. In this study, we proposed the development of a frost or freezing condition monitoring system on the OCSs that utilizes wireless communication.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.161-167
• /
• 2006

The purpose of this study is to find the optimal conditions of PCM slurry manufacturing equipment for saving the marketing cost and keeping the original quality of products. In addition, the characteristics of the movable container for shipping or distributing products is analysed. The major results are as follows. 1. PCM thermal storage system is designed with the conditions of temperature($-5{\sim}10^{\circ}C$), cold chain time(30 minutes), and one time usage(50 liter). This system includes tank, freezer, circulating pump, cycle type heat exchanger, swelling tank, equipment of supplying PCM supplying unit includes cold tank, cycle type heat exchanger, suction unit and control equipments, etc. 2. After ability test of PCM thermal storage system, it shows that the required freezing time of PCM thermal storage system is less than one of the previous system. The reason is that churn (top and bottom) and compulsion circulation are occurred simultaneously and unit cooler type method is better than chiller type method. 3. By the experiment of transportation latent heat container, it is decided that the best container is $K_1$ with latent heat temperature($0{\sim}5^{\circ}C$) and density(0.15%). However, for $K_l\;and\;K_2$, it is necessary more studies on latent heat thermal conditions and conditions of making method.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.59-65
• /
• 2018

RC(Reinforced Concrete) structures are exposed to various exterior conditions, and the performances of both chloride resistance and freezing/thawing action are evaluated for those exposed to corrosive environment-sea shore. Recently developed FRP Hybrid Bars which is coated with glass fiber and epoxy with core steel has an engineering advantage of higher Elasticity than FRP rod. In this work, corrosion resistance, weight loss, and bond strength are evaluated for the FRP Hybrid Bar tested through freezing/thawing action for 300cycles. The double coated FRP Hybrid Bar shows the least weight loss without defection due to freezing/thawing action. Bond strength in FRP Hybrid Bar increases to 120% of normal steel through torturity effect with Si-coating. Bond strength in normal steel shows 0.86~0.89times in 3-day corrosion acceleration and 0.35~0.38times in 5-day corrosion acceleration, however, that in FRP Hybrid Bar shows little changes in bond strength before and after freezing/thawing action.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.589-592
• /
• 2008

This study was conducted to assess the durability of Chloride-inhibiting Low-Heat Cement while being subjected to freezing-thawing during winter seasons. Although durability varies slightly depending on the conditions of the jobsite, frost damage to concrete resulting from repeated freezing and thawing over the course of seasonal changes is the leading cause behind lowered concrete durability. in addition, concrete that has been subjected to freezing and thawing during the winter season develops a significant amount of expansive force at the core and begins to exhibit signs of damage, such as cracking, peeling, and detachment from the aggregate. Therefore, this study fabricated test specimens using a Chloride-inhibiting Low-Heat Cement(CLC) and the widely used blast furnace slag cement(BFS) and Ordinary Portland Cement(OPC) with water-to-cement ratios of 35%, 40% and 45%, respectively, to assess the durability index of the CLC as per resistance to freezing-thawing. The specimens were then tested using the KS F 2456 method (Testing method for resistance of concrete to rapid freezing and thawing) to measure the dynamic modulus of elasticity. The dynamic modulus of elasticity measurements were then used to derive the durability indices. By comparing the durability indices, it was confirmed that CLC, BFS, and OPC all had superior durability.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.200-204
• /
• 1988

Cryoprotectivity of garlic bulb caused by the freezing point depression was studied to establish the possibility of preserving the garlic at subzero temperature. Freezing point of fresh garlic tissue showed almost consistency, ranged from $-4^{\circ}C\;to\;-5^{\circ}C$ regardless of the cultivation area. However, the freezing point was varied with the postharvest treatment and storage conditions, so that freezing point of fresh garlic was $-3.5^{\circ}C$ before predrying, $-4.5^{\circ}C$ after predrying, $-5.5^{\circ}C$ after 5 months of storage and that of dead tissue was $-2.5^{\circ}C$. Freezing lethality of fresh garlic bulb preserved at -4, -6.5 and $-15.5^{\circ}C$ were 0, 10 and 70%, respectively. From these results, it was concluded that critical lethal temperature might be $-5{\sim}-6^{\circ}C$. The respiration rate of garlic bulb decreased with lowering the storage temperature down to $-4^{\circ}C$. $Q_{10}$ value was 2 at the temperature range of $-4{\sim}-5^{\circ}C$, 3 at $5{\sim}15^{\circ}C$ and 1.2 at $15{\sim}37^{\circ}C$. In conclusion, optimal temperature for garlic storage was $-4^{\circ}C$ when considering the cryoprotectivity of garlic bulb at subzero temperature.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.341-347
• /
• 1998

To develop simple and accurate analytical method for freezing time prediction of beef and tylose under various freezing conditions, freezing time (Y) was regressed against the reciprocal $(X_3)$ of difference of initial freezing point and freezing medium temperature, reciprocal $(X_4)$ of surface heat transfer coefficient, the initial temperature $(X_1)$ and thickness $(X_2)$ of samples which should cover most situations arising in frozen food industry. As results of the multiple regression analysis, equations were obtained as follows. $Y_{tylose}=3.45X_1+7642.84X_2+4642.67X_3+2946.89X_4-431.33\;(R^2=0.9568)$ and $Y_{beef}=0.68X_1+7568.98X_2+2430.78X_3+3293.26X_4-299.00\;(R^2=0.9897)$. These equations offered better results than Plank, Nagaoka and Pham's models, shown in satisfactory agreement with models of Cleland & Earle and Hung & Thompson when were compared to previous models, and the accuracy of its was very high as average absolute difference of about 10% in the difference between the fitted and experimental results. Also, thermal diffusivities of beef and tylose were measured as $4.43{\times}10^{-4}m^2/hr$ and $4.39{\times}10^{-4}m^2/hr$ at $6{\sim}7^{\circ}C$, $2.42{\times}10^{-3}m^2/hr$ and $3.32{\times}10^{-3}m^2/hr$ at $-10{\sim}-12^{\circ}C$. Initial freezing points of beef and tylose were $-1.2^{\circ}C\;and\;-0.6^{\circ}C$, respectively. Surface heat transfer coefficients were estimated $20.57\;W/m^2^{\circ}C$ with no-packing, $16.11\;W/m^2^{\circ}C$ with wrap packing and $13.07\;W/m^2^{\circ}C$ with Al-foil packing, and the cooling rate of immersion freezing method was about 10 times faster than that of air blast freezing method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.5
• /
• pp.738-744
• /
• 2008

In most developing countries consumers purchase retail cuts from hot carcasses and prepare traditional meat products as per their convenience and requirements. In this study, effects of different post mortem handling practices on quality of meat curry from culled sheep meat have been studied. After slaughter, leg cuts were subjected to nine commonly prevalent handling conditions in India viz. deboning (boning out) and cooking within 2-3 h (1), deboning immediately and cooking after 5-6 h (2), deboning after 5-6 h and cooking (3), deboning immediately, storage at $4^{\circ}C$ for 24 h and cooking (4), chilling for 24 h at $4^{\circ}C$, deboning and cooking (5), deboning after 5-6 h, storage for 24 h at $4^{\circ}C$, and cooking (6), deboning after 5-6 h, storage for 48 h at 4??C and cooking (7), deboning after 5-6 h, freezing and cooking (8), deboning after 5-6 h, storage for 24 h at $4^{\circ}C$, freezing and cooking (9). Significant differences were observed in pH, water-holding capacity, cooking loss and shear force values. Sensory scores were significantly higher in conditions (1), (5) and (9), and significantly lower in conditions (4) and (6). From the results, it was concluded that, to have the best quality product, meat should be cooked either immediately after slaughter or should be deboned just before cooking. Storage of deboned meat at refrigerated temperature must be avoided.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1906-1912
• /
• 2014

To evaluate the effect of freezing temperature on quality of blueberries, blueberry fruit was frozen at -20, -45, and $-70^{\circ}C$ immediately after harvest. After 24 hr of freezing, frozen blueberries were stored at $-20^{\circ}C$ for 2 months. Blueberries were thawed at $4^{\circ}C$ or $25^{\circ}C$ and subjected to subsequent analyses of drip ratio, fruit hardness, pH of juice, color, and sugar content. Frozen berries at all three temperatures did not show any significant difference in pH or sugar content compared with fresh berries. The drip ratio of berries decreased as the freezing temperature decreased. Thawing conditions significantly affected the drip ratio of berries frozen at $-20^{\circ}C$. Hardness of berries was significantly reduced after freeze-thawing. Freezing and thawing reduced total aerobic bacteria and yeast/mold numbers by more than 2 log regardless of freezing or thawing temperature ($4^{\circ}C$ or $25^{\circ}C$). Cross-section of blueberries did not show different shapes by freezing temperature. Further studies such as sensory evaluation are needed to determine the optimum freezing temperature regarding quality and cost.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.75-84
• /
• 2013

Soil freezing is a phenomenon arising due to temperature difference between atmosphere and ground, and physical properties of soils vary upon the phase change of soil void from liquid to solid (ice). A heat-transfer mechanism for this case can be explained by the conduction in soil layers and the convection on ground surface. Accordingly, the evaluation of proper thermal properties of soils and the convective condition of ground surface is an important task for understanding freezing phenomenon. To describe convection on ground surface, simplified coefficient methods can be applied to deal with various conditions, such as atmospheric temperature, surface vegetation conditions, and soil constituents. In this study, two methods such as n-factor and convection coefficient for the convective ground surface boundary were applied within a commercial numerical program (TEMP/W) for modeling soil freezing phenomenon. Furthermore, the numerical results were compared to laboratory testing results. In the series of the comparison results, the convection coefficient is more appropriate than n-factor method to model the convective boundary condition.

• Korean Journal of Food Science and Technology
• /
• v.46 no.6
• /
• pp.710-715
• /
• 2014

To date, the quality and safety of frozen bokbunja have not been clearly assessed. To produce high-quality frozen bokbunja, the optimal freeze-thaw conditions need to be explored. The most popular cultivar (Rubus occidentalis) in Korea was selected for this study. To determine the changes in the quality of frozen R. occidentalis berries, different freezing temperatures were used. The berries were frozen at -20, -45, and $-70^{\circ}C$ immediately after harvest. The drip ratio, hardness, pH, sugar content, color, and anthocyanidin content of the frozen and thawed samples were analyzed. The drip ratio, sugar content, and hardness of the berries correlated significantly with the freezing temperatures. The color and pH of the berries were not significantly affected by the freezing conditions. Frozen leaks between cells reduced significantly with decreasing temperatures. The freeze-thawing process significantly reduced the total aerobic bacteria and inhibited the growth of yeast/mold in the berries to about 2 log scales.