• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.175-184
• /
• 2009

The study analyzes likely impacts of left truck lane restriction strategies on urban freeways based on a traffic simulation model. This study contains two main parts. The first part is performed to develop feasible alternatives as well as provide insights into conditions under left truck lane restrictions would be effective based on the analysis of two representative hypothetical highways. Different levels of O-D demands and truck percentage is at least restrictions would work when maximum rate of flow is more than 1,300vphpl or truck percentage is at least over loft of the total traffic. The second part of our study concerns a case study on a region with perhaps the highest truck volumes in the U.S. - a northbound section of Interstate 710 corridor in Los Angeles County, Southern California. The results show that restricting the two leftmost lanes under congested traffic with heavy ruck use, provides the most positive impacts in terms of improving the flow of traffic and saving fuel. In addition, our study demonstrates that in general, the number of lanes restricted is a crucial factor in the success of this strategy.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.35-45
• /
• 2008

Trucking is the most frequently used mode for freight movement due to relatively lower shipping costs and its operational flexibility. However, truck traffic can contribute to serious safety problems where they occupy high percentage of the total traffic. Heavy truck crashes arc more likely to result in serious injuries and fatalities than are crashes involving light vehicles. Therefore, safety issues for truck traffic are very significant both for public agencies and for general travelers. The objective of our study is to find truck-involved accident patterns according to traffic conditions and main factors as well as to find the most critical factor through conventional statistical techniques. A vailable data were obtained from TASAS (Traffic Accident Surveillance and Analysis System). Once critical factors are identified, effective and efficient truck management strategies can be discussed.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.49-56
• /
• 2011

Understanding various casual factors affecting the occurrence of freeway traffic crash is a backbone of deriving effective countermeasures. The first step toward understanding such factors is to identify crash risks on freeways. Unlike existing studies, this study focused on the unsafe vehicle maneuvering that can be detected by in-vehicle sensors. The recent advancement of sensor technologies allows us to gather and analyze detailed microscopic events leading to crash occurrence such as the abrupt change in acceleration. This study used an accelerometer to capture the unsafe events. A set of candidate variables representing unsafe events were derived from analyzing acceleration data obtained by the accelerometer. Then, the crash risk was modeled by the binary logistic regression technique. The probabilistic outcome of crash risk can be provided by the proposed model. An application of the methodology assessing crash risk was presented, and further research items for the successful field implementation were also discussed.

• Journal of Korean Society of Transportation
• /
• v.18 no.2
• /
• pp.7-16
• /
• 2000

This study Presents an guideline of the exclusive bus and/or truck lane on 8 lanes freeways using FREFLO model and INTEGRATiON model. Four alternatives : do nothing, bus exclusive lane, truck exclusive lane, bus and truck exclusive lane, were evaluated using average daily vehicle travel time as measures of effectiveness. It is found that bus and truck exclusive lane is the most effective alternative reducing total travel time by 7% when ADT is below 80,000 vehicle/day. However, when ADT is above 80,000 vehicle/day and bus Proportion is above 12%, bus exclusive lane is the most effective alternative reducing total travel time by more than 5.6%. It is further found that INTEGRATION, the stochastic and microscopic model, is more sensitive than FREFLO, the deterministic and macroscopic model, in evaluating the effectiveness of four alternatives.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.111-120
• /
• 2007

More accurate vehicle trajectory data are now readily available through Differential Global Positioning Systems (DGPS). A variety of research opportunities emerge with utilization of such high resolution traffic data. A novel approach of this study is to explore drivers' responsive behavior to variable message signs (VMS) by using individual vehicle trajectories extracted from in-vehicle DGPS data. Responsive characteristics of drivers traveling on urban freeways, which can be represented by speeds and acceleration rates, under the provision of real-time traffic information through VMS are statistically investigated. In addition to conducting an ANOVA test, probability density functions of acceleration rates were estimated. The findings of this study can be used to understand the impact of drivers' workload when providing VMS messages on traffic flow patterns. Furthermore, results can be important fundamentals to assist in conducting more realistic traffic simulations.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.59-70
• /
• 2009

This study presents a novel traffic information system which is capable of detecting unsafe traffic events leading to accident occurrence and providing warning information to drivers for safer driving. Unsafe traffic events are captured by a vehicle image processing-based detection system in real time. Surrogate safety measures (SSM) representing quantitative accident potentials were derived, and further utilized to develop a data processing algorithm and analysis techniques in the proposed system. This study also defined 'emergency warning area' and 'general warning area' for more effective provision of warning information. In addition, methodologies for determining thresholds to trigger warning information were presented. Technical issues and further studies to fully exploit the benefits of the proposed system were discussed. It is expected that the proposed system would be effective for better management of traffic flow to prevent traffic accidents on freeways.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.117-134
• /
• 2004

Truck traffic accounts for a substantial fraction of the traffic stream in many regions and is often the source of localized traffic congestion, potential parking and safety problems. Truck trips tend to be ignored or treated superficially in travel demand models. It reduces the effectiveness and accuracy of travel demand forecasting and may result in misguided transportation policy and project decisions. This paper presents the development of speed-flow relationships with truck impacts based on CORSIM simulation results in order to enhance travel demand model by incorporating truck trips. The traditional BPR(Bureau of Public Road) function representing the speed-flow relationships for roadway facilities is modified to specifically include the impacts of truck traffics. A number of new speed-flow functions have been developed based on CORSIM simulation results for freeways and urban arterials.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.19-28
• /
• 2007

Korea's national highways, which emphasize a high level of mobility, serve primarily intercity travel and are used as a detour for freeways. However. at the present. the highways do not have consistent geometric features or other characteristics: for example. some highways have full access control and others have uncontrolled access. Generally, geometric and traffic conditions affect Pronouncedly travel speeds in the highway sections. This study focused on the effect of signalized intersection relative factors on the speeds: signalized intersection densities, signal phases, and volume levels. The study shows that signalized intersection density was the strongest variable affecting the travel speeds: the speeds held fairly constant over intersection densities below 0.3 intersections/km, decreased sharply through intersection density of 0.7 intersections/km. and appeared constant at the lowest level over intersection densities above 0.7 intersections/km. The results also indicate that the effect of signal and traffic volume levels on the speeds was similar to that of the signalized intersection density.

• Journal of Korean Society of Transportation
• /
• v.31 no.4
• /
• pp.85-94
• /
• 2013

The Continuous Risk Profile (CRP) has been well known to be the most accurate and efficient among existing network screening methods. However, the classical CRP uses safety performance functions (SPFs) which require a huge investment to construct a database system. This study aims to suggest a new CRP method using average crash frequencies of homogeneous groups, instead of SPFs, as rescaling factors. Hierarchical clustering analysis is performed to classify freeway segments into homogeneous groups based on the data of AADT and number of lanes. Using the data from I-880 in California, the proposed method is compared to other several network screening methods. The results show that the proposed method decrease false positive rates while it does not produce any false negatives. The method developed in this study can be easily applied to screen freeway networks without any additional complex database systems, and contribute to the improvement of freeway safety management systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.152-167
• /
• 2018

The high-speed weigh-in-motion system can collect the traveling speed and load information of individual vehicles, which can be used in a variety of ways for the traffic surveillance. However, it has a limit to apply the high-speed weigh-in-motion data directly to a safety analysis because high-speed weigh-in-motion's raw data are point measured data. In order to overcome this problem, this paper proposes a method to calculate the conflict rate and the Impulse severity based on surrogate safety measures derived from the detection time, detection speed, vehicle length, vehicle type, vehicle weight. It will be possible to analyze and evaluate the risk of rear-end collision on freeway traffic. In addition, this study is expected to be used as a fundamental for identifying crash risks and developing policies to enhance traffic safety on freeways.