• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.165-166
• /
• 2023

Free-form Concrete Panel(FCP) is each panel that composes the concrete exterior skin of Free-form building. FCPs contain curved surfaces, and FCPs have different curvature, size, and angles. In order to manufacture FCP, high technology is required, and it is currently difficult to manufacture it according to the design shape. In particular, many errors occur in the side shape of FCP. This is because when the side silicone mold is applied, it is installed without a coupling method between molds and support device. In this study, basic research was conducted to develop a side silicone mold support device to solve the above problems. We classified the required performance and derived the detailed requirements. Also, Based on this, we drew the basic design of the support device. We plans to conduct design improvement, mock-up making, and FCP manufacturing experiments through future research.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.1
• /
• pp.129-139
• /
• 1996

The processor allocation problem in mesh multicamputers is to recognize and locate a free submesh that can accommodate a request for a submesh of a specified size. An efficient submesh allocation strategy is required for achieving high performance on mesh multicomputers. In this paper, we propose a new best-fit submesh allocation strategy for mesh multicomputers. The proposed strategy maintains and uses a free submesh list to get global information for free submeshes. For an allocation request the proposed strategy tries to allocate a best-fit submesh which causes the least amount of potential processor fragmentation so as to preserve the large free submeshes as many as possible for later requests. For this purpose, we introduce a novel function for quantifying the degree of potential fragmentation of submeshes. The proposed strategy has the complete submesh recognition capability. Extensive simulation is carried out t compare the proposed strategy with the previous strategies and experimental results indicate that the proposed strategy exhibits the best performance along with about 10% to 30% average improvement over the best previous strategy.

• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.385-390
• /
• 1996

The electrical resistivity of the ceramic glaze coated on ceramic substrate plays an important role on the characteristics of the thick and thin film electrical circuits. In this study the effects of the various modifiers on the electrical resistivity were examined in SiO2-Al2O3-B2O3-RO-Na2O (RO=CaO , SrO, BaO, PbO) glass system. In alkali free glasses where divalent cations are responsible for electrical conduction the electrical conductivity of th glasses increased with the ionic size of divalent cations due to the decrease in the bond strength between oxyben and divalent cation. In Na2O containing glasses however where Na+ ion is responsible for electrical conduction the ionic conductivity decreased with the ionic size of divalent cations because the blocking effect of the cations on Na+ ion movement increased with larger divalent cations. Na+ ionic conduction also depended on the glass structure relaxation due to the corrdination number changes of B2O3 and Al2O3 which varied with the NaO2 content in the glass.

• Current Photovoltaic Research
• /
• v.5 no.2
• /
• pp.59-62
• /
• 2017

Surface texturing is affected the uniformity and size of pyramid with saw mark defect density. To analysis the influence of the saw mark defect density, we textured various si wafer. When the texturing process proceeds without the saw mark removal, silicon wafer of low-saw mark defect density showed small pyramid size of $3.5{\mu}m$ with the lowest average value of the reflectance of 10.6%. When texturing carried out after removal of the saw mark using the TMAH solution, we obtained a reflectance of about 11% and the large pyramid size of $5{\mu}m$. As a result, saw mark wafers showed a better pyramid structure than saw mark-free wafer. This result showed that saw mark can take place more smooth etching by the KOH solution and saw mark-free wafer is determined to be a factor that have a higher reflectance and a large pyramid.

• Structural Engineering and Mechanics
• /
• v.50 no.2
• /
• pp.181-199
• /
• 2014

Locking phenomenon is a mesh problem and can be staved off with mesh refinement. If the studier is not preferred going to the solution with increasing mesh size or the computer memory can stack over flow than using higher order plate finite element or using integration techniques is a solution for this problem. The purpose of this paper is to show the shear locking phenomenon can be avoided by increase low order finite element mesh size of the plates and to study shear locking-free analysis of thick plates using Mindlin's theory by using higher order displacement shape function and to determine the effects of various parameters such as the thickness/span ratio, mesh size on the linear responses of thick plates subjected to uniformly distributed loads. A computer program using finite element method is coded in C++ to analyze the plates clamped or simply supported along all four edges. In the analysis, 4-, 8- and 17-noded quadrilateral finite elements are used. It is concluded that 17-noded finite element converges to exact results much faster than 8-noded finite element, and that it is better to use 17-noded finite element for shear-locking free analysis of plates.

• Journal of Welding and Joining
• /
• v.24 no.4
• /
• pp.39-49
• /
• 2006

The austenite grain growth model in low alloyed steel HAZ without precipitates was proposed by analyzing isothermal grain growth behavior. Steels used in this study were designed to investigate the effect of alloying elements. Meanwhile, a systematic procedure was proposed to prevent inappropriate neglect of initial grain size (D0) and misreading both time exponent and activation energy for isothermal grain growth. It was found that the time exponent was almost constant, irrespectively of temperature and alloying elements, and activation energy increased with the addition of alloying elements. From quantification of the effect of alloying elements on the activation energy, an isothermal grain growth model was presented. Finally, combining with the additivity rule, the austenite grain size in the CGHAZ was predicted.

• Composites Research
• /
• v.17 no.5
• /
• pp.68-77
• /
• 2004

The electromagnetic (EM) absorption or shielding characteristics of a material is an important issue not only for military purpose but also for commercial purposes such as radar, electric or telecommunication devices. In order to design the effective electromagnetic wave absorber, the electromagnetic characteristics of the constituents of the material should be available in target frequency band. Also, it must be possible to predict the electromagnetic properties of absorbers with respect to the content of lossy ingredients. In this study, the dielectric properties of unsaturated polyester resins containing nano-size conductive carbon black powder were measured with a free space method in the X-band frequency range and analyzed with respect to the content of carbon black. Finally, the method for estimating the dielectric properties of polymeric resin containing conductive carbon black with respect to the EM frequency was developed and verified.

• Korean Journal of Child Studies
• /
• v.37 no.1
• /
• pp.49-60
• /
• 2016

Objective: The purpose of the study was to explore the relationship between the daily routines and physical environments of daycare centers. Methods: A total of 20 classes at 8 different daycare centers from the metropolitan city of Daejeon were investigated. Trained observers visited each daycare center more than 3 times and collected data about daily routines using the Observational Log for Daily Routines in Daycare Centers. Also, the physical environments of each class were investigated in terms of actual size, layout of activity center, etc. Results and Conclusion: Results of the study were: first, daily routines of daycare centers could be divided into 2 distinguishable types by cluster analysis- 'free play oriented' and 'group activity oriented' Second, the amount of space each child has in a classroom differed according to the total size of the classroom. An average of 7 activity centers existed in each classroom. Third, there was a difference between free play oriented and group activity oriented groups in terms of the classroom size allocated for each child and the organization of the activity centers.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.601-606
• /
• 2001

Free vibration analysis was performed for a spinning disk/spindle system mounted on a flexible baseplate. A simplified model was presented considering the effects of the baseplate flexibility on a disk/spindle system, and the equations of motion were derived by the assumed mode method and Lagrange's equation. From the results of the tree vibration analysis, the variations of the natural frequencies were investigated by changing rotating speed, baseplate thickness. They were attributed to the coupling between the flexible modes of the spinning disk/spindle system and the baseplate. This simplified model was used to predict the dynamic characteristics of a small size disk drive. The validity of the simplified model was verified by experiments and FE analysis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.134-140
• /
• 2017

Shape-from-shading (SFS) or stereo vision algorithms can be utilized to measure the shape of an object with imaging techniques for effective sensing in non-contact measurements. SFS algorithms could reconstruct the 3D information from a 2D image data, offering relatively comprehensive information. Meanwhile, a stereo vision algorithm needs several feature points or lines to extract 3D information from two 2D images. However, to measure the size of an object with a freeform surface, the two algorithms need some additional information, such as boundary conditions and grids, respectively. In this study, a stereo vision scheme using the depth information obtained by shape-from-shading as patterns was proposed to measure the size of an object with a freeform surface. The feasibility of the scheme was proved with an experiment where the images of an object were acquired by a CCD camera at two positions, then processed by SFS, and finally by stereo matching. The experimental results revealed that the proposed scheme could recognize the size and shape of freeform surface fairly well.