• 제목/요약/키워드: free-ranging density

검색결과 19건 처리시간 0.025초

논오리 방사밀도가 오리의 행동양상 및 벼 생육 ${\cdot}$ 수량에 미치는 영향 (Effect of Duck Free-Ranging Density on Duck Behavior Patterns, and Rice Growth and Yield under a Rice-Duck Farming System in Paddy Field)

  • 고병대;송영한;만전정치
    • 한국환경농학회지
    • /
    • 제20권2호
    • /
    • pp.86-92
    • /
    • 2001
  • 벼논 오리농법에 있어서 오리 방사체계를 명확히 하기 위해 각 처리구를 4 a의 동일면적으로 구분하고, 방사 오리수를 각각 6수, 9수, 12수 및 15수씩으로 하는 4처리구를 설계하여 방사밀도에 따른 오리의 행동형 및 벼 생육과 수량반응에 미치는 영향에 대하여 검토하였던 바, 그 결과를 요약하면 다음과 같다. 오리 방사밀도에 따른 일중 12시간 동안의 행동변화에서 섭식 및 이동행동은 12수 방사구에서 가장 길었고, 노동행동에서도 다른 3처리구에 비해 12수 방사구에서 유의적으로 길게 나타났다(P<0.05). 반면 휴식행동은 12수 방사구에 비해 9수 및 15수 방사구에서 현저히 길게 나타났다(P<0.05). 방사오리가 가장 활발한 활동을 보이는 일중 6시간 동안의 이동 회수는 15수 방사구에서 가장 적었고 나머지 3처리구간에서는 거의 비슷한 수준을 보였다. 잠수회수는 9수 방사구에서 다른 3처리구에 비해 유의적으로 많았으며(P<0.01), 벼 포기 쪼는 회수도 9수 방사구에서 12수 및 15수 방사구에 비해 현저히 많았다(P<0.05). 그러나 오리가 쪼은 총 벼포기수에서는 방사밀도가 낮은 6수 및 9수 방사구에 비해 15수 방사구에서 유의적으로 많았다(P<0.01). 벼 초장은 오리 방사후 30일째부터 방사밀도가 높을 수록 짧아지는 경향을 보였고(P<0.05), 경수(莖數)는 방사밀도에 의해 대차없었다. 출수후 벼 생육변화에서 간장(稈長)은 방사밀도가 높은 12수 및 15수 방사구에서 짧았고(P<0.05), 수장(穗長)은 오리 방사밀도에 의해 대차없었다. 벼 지상부의 건물중량은 방사밀도가 높을 수록 낮은 값에 편중됨을 보인 반면, 지하부의 건물중량은 증가하는 경향을 나타냈다. 오리 방사밀도에 따른 벼 결주발생수은 15수 방사구에서 가장 많았고, 다음으로 6수, 9수 및 12수의 순으로 나타났다. 한편 수당(穗當) 영화수는 6수 및 9수 방사구에 비해 12수 및 15수 방사구에서 유의적으로 많았고(P<0.05), 등숙율은 다른 3처리구에 비해 15수 방사구에서 낮은 경향을 보였다. 10 a당 수량은 12수 방사구에서 726.5 kg으로 가장 높은 수량증가를 보였고, 다음으로 9수, 15수 및 6수 방사구의 순으로 나타났다.

  • PDF

Estimation of Electrical Parameters of OD Organic Semiconductor Diode from Measured I-V Characteristics

  • Moiz, Syed Abdul;Ahmed, Mansoor M.;Karimov, Kh. S.
    • ETRI Journal
    • /
    • 제27권3호
    • /
    • pp.319-325
    • /
    • 2005
  • In this paper the effect of temperature on the electrical properties of organic semiconductor disperse orange dye 25 (OD) have been examined. Thin films of OD have been deposited on $In_{2}O_{3}$ substrates using a centrifugal machine. DC current-voltage (I-V) characteristics of the fabricated devices $(Al/OD/In_{2}O_{3)$ have been evaluated at varying temperatures ranging from 40 to $60^{\circ}C$. A rectification behavior in these devices has been observed such that the rectifying ratio increases as a function of temperature. I-V characteristics observed in $Al/OD/In_{2}O_{3)$ devices have been classified as low temperature $({\leq} 50^{\circ}C)$ and high temperature characteristics (approximately $60^{\circ}C$). Low temperature characteristics have been explained on the basis of the charge transport mechanism associated with free carriers available in OD, whereas high temperature characteristics have been explained on the basis of the trapped space-charge-limited current. Different electrical parameters such as traps factor, free carrier density, trapped carrier density, trap density of states, and effective mobility have been determined from the observed temperature dependent I-V characteristics. It has been shown that the traps factor, effective mobility, and free carrier density increase with increasing values of temperature, whilst no significant change has been observed in the trap density of states.

  • PDF

DECAY OF TURBULENCE IN FLUIDS WITH POLYTROPIC EQUATIONS OF STATE

  • Lim, Jeonghoon;Cho, Jungyeon
    • 천문학회지
    • /
    • 제53권2호
    • /
    • pp.49-57
    • /
    • 2020
  • We present numerical simulations of decaying hydrodynamic turbulence initially driven by solenoidal (divergence-free) and compressive (curl-free) drivings. Most previous numerical studies for decaying turbulence assume an isothermal equation of state (EOS). Here we use a polytropic EOS, P ∝ ργ, with polytropic exponent γ ranging from 0.7 to 5/3. We mainly aim at determining the effects of γ and driving schemes on the decay law of turbulence energy, E ∝ t. We additionally study probability density function (PDF) of gas density and skewness of the distribution in polytropic turbulence driven by compressive driving. Our findings are as follows. First of all, we find that even if γ does not strongly change the decay law, the driving schemes weakly change the relation; in our all simulations, turbulence decays with α ≈ 1, but compressive driving yields smaller α than solenoidal driving at the same sonic Mach number. Second, we calculate compressive and solenoidal velocity components separately and compare their decay rates in turbulence initially driven by compressive driving. We find that the former decays much faster so that it ends up having a smaller fraction than the latter. Third, the density PDF of compressively driven turbulence with γ > 1 deviates from log-normal distribution: it has a power-law tail at low density as in the case of solenoidally driven turbulence. However, as it decays, the density PDF becomes approximately log-normal. We discuss why decay rates of compressive and solenoidal velocity components are different in compressively driven turbulence and astrophysical implication of our findings.

분말식품의 마이크로파 유전율 및 수분함량 측정 (Measurement of Permittivity and Moisture Content of Powdered Food at Microwave Frequencies)

  • 김기복;김종헌;이진민
    • Journal of Biosystems Engineering
    • /
    • 제32권4호
    • /
    • pp.237-246
    • /
    • 2007
  • In this study, the microwave free-space transmission technique was used to measure the dielectric property of powdered food at microwave frequencies. The sample holder was designed and fabricated to transmit the microwave signals ranging from 1 to 15GHz. From the microwave propagation theory the equation expressing the dielectric property of powdered food was derived and validated by standard dielectrics. The dielectric property of powdered food such as wheat flour, coffee powder and milk powder was measured and analyzed. In the uniform range of bulk density of material, the real parts of permittivity of the food samples increased with the increase of moisture content, bulk density and temperature of the samples. The propagation properties such as attenuation and phase shift increased linearly as the moisture density of the food samples increased. As a measuring frequency of the moisture content, the X-band was recommended.

Rheology of alumina suspensions stabilized with Tiron

  • Gulicovski, J.J.;Cerovic, Lj.S.;Milonjic, S.K.
    • Korea-Australia Rheology Journal
    • /
    • 제20권2호
    • /
    • pp.65-71
    • /
    • 2008
  • Pressure filtration technique was used to obtain defect-free microstructure of green cast ceramic bodies. Stable alumina suspensions of desired rheology (<5 Pa s at $1\;s^{-1}$) containing 60-80 mass. % solid loading were prepared in the alkaline region (at $pH{\approx}9$) with an optimum amount of 0.5 dmb % of Tiron added. Acidic region (at $pH{\approx}4$) enabled the preparation of 60 mass. % suspensions with addition of 1.5 dmb % of Tiron. The best quality slip was processed from an 80 mass.% suspension with 63% of theoretical density. The homogeneity of particle packing and the absence of defects in microstructure were proven by narrow pore size distribution (ranging from 32 to 64 nm, with up to 85% abundance), confirming advantages of the wet consolidation route.

Weld Defect Formation Phenomena during High Frequency Electric Resistance Welding

  • Choi, Jae-Ho;Chang, Young-Seup;Kim, Yong-Seog
    • Journal of Welding and Joining
    • /
    • 제19권3호
    • /
    • pp.267-273
    • /
    • 2001
  • In this study, welding phenomena involved in formation of penetrators during high frequency electric resistance welding were investigated. High speed cinematography of the process revealer that a molten bridge between neighboring skelp edges forms at apex point and travels along narrow gap toward to welding point at a speed ranging from 100 to 400 m/min. The bridge while moving along the narrow gap swept away oxide containing molten metal from the gap, providing oxide-free surface for a forge-welding at upsetting stand frequency of the budge formation, travel distance and speed of the bridge were affected by the heat input rate into strip. The travel distance and its standard deviation were found to have a strong relationship with the weld defect density. Based on the observation, a new mechanism of the penetrator formation during HF ERW process is proposed.

  • PDF

Recent Progress of Nonpolar and Semipolar GaN on Sapphire Substrates for the Next Generation High Power Light Emitting Diodes

  • 이성남
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2011년도 춘계학술발표대회
    • /
    • pp.20.2-20.2
    • /
    • 2011
  • III-nitrides have attracted much attention for optoelectronic device applications whose emission wavelengths ranging from green to ultraviolet due to their wide band gap. However, due to the strong polarization properties of conventional c-plane III-nitrides, the built-in polarization-induced electric field limits the performance of optical devices. Therefore, there has been a renewed interest in the growth of nonpolar III-nitride semiconductors for polarization free heterostructure optoelectronic and electronic devices. However, the crystal and the optical quality of nonpolar/semipolar GaN have been poorer than those of conventional c-plane GaN, resulting in the relative poor optical and electrical properties of light emitting diodes (LEDs). In this presentation, I will discuss the growth and characterization of high quality nonpolar a-plane and semipolar (11-22) GaN and InGaN multiple quantum wells (MQWs) grown on r- and m-plane sapphire substrates, respectively, by using metalorganic chemical vapor deposition (MOCVD) without a low temperature GaN buffer layer. Especially, the epitaxial lateral overgrowth (ELO) technique will be also discussed to reduce the dislocation density and enhance the performance of nonpolar and semipolar GaN-based LEDs.

  • PDF

에틸렌디아민을 착화제로 사용하는 팔라듐-니켈 합금도금 (Palladium-Nickel Alloy Electrodeposition Using Ethylenediamine as Complexing Agent)

  • 최병하;손호상;김경태;손인준
    • 한국표면공학회지
    • /
    • 제47권5호
    • /
    • pp.215-220
    • /
    • 2014
  • Electrodeposition behaviors of Pd-Ni alloys were investigated from the polarization curves in a solution containing ethylenediamine as complexing agent. The microstructure and hardness of electrodeposited Pd-Ni alloys were also characterized. Codeposition of Pd-Ni alloys was successfully performed in the wide current density ranging from 2 to $5000A{\cdot}m^{-2}$ because the deposition potential of Pd became close to that of Ni in the ethylenediamine-contained solution. It was also found from X-ray diffraction patterns that the solid solution between Pd and Ni was formed with variation of the composition of alloys. The measured hardness of Pd-Ni alloys increased with increasing the contents of Ni due to solid solution strengthening and grain refinement. The electrodeposited Pd-Ni alloys also exhibited a crack free smooth surface morphology from the SEM observation.

Optimization and Mathematical Modeling of the Transtubular Bioreactor for the Production of Monoclonal Antibodies from a Hybridoma Cell Line

  • Halberstadt, Craig R.;Palsson, Bernhanrd O.;Midgley, A.Rees;Curl, Rane L.
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제7권3호
    • /
    • pp.163-170
    • /
    • 2002
  • This report describes the use of a transtubular bioreactor to study the relative effects of diffusion versus perfusion of medium on antibody production by a hybridoma cell line. The study was performed with a high-density cell culture maintained in a serum-free, low-protein medium for 77 days. It was determined that the reactor possessed a macro-mixing pattern residence time distribution similar to a continuous stirred tank reactor (CSTR), However, due to the arrangement of the medium lines in the reactor, the flow patterns for nutrient distribution consist of largely independent medium path lengths ranging from short to long. When operated with cyclic, reversing, transtubular medium flow, some regions of the reactor (with short residence times) are more accessible to medium than others (with long residence times). From this standpoint, the reactor can be divided into three regions: a captive volume, which consists of medium primarily delivered via diffusion; a lapped volume, which provides nutrients through unilateral convection; and a swept volume, which operates through bilateral convection. The relative sizes of these three volumes were modified experimentally by changing the period over which the direction of medium flow was reversed from 15 min (larger captive volume) to 9 h (larger swept volume). The results suggest that antibody concentration increases as the size of the diffusion-limited (captive) volume is increased to a maximum at around 30 min with a sharp decrease thereafter. As reflected by changes in measured consumption of glucose and production of lactate, no significant difference in cellular metabolism occurred as the reactor was moved between these different states. These results indicate that the mode of operation of the transtubular bioreactor may influence antibody productivity under serum-free, low-protein conditions with minimal effects on cellular metabolism.

Short-term effects of elevated CO2 on periphyton community in an artificially constructed channel

  • Park, Hye-Jin;Kwon, Dae-Ryul;Kim, Baik-Ho;Hwang, Soon-Jin
    • Journal of Ecology and Environment
    • /
    • 제40권1호
    • /
    • pp.12-19
    • /
    • 2016
  • Background: Direct impact of inorganic carbon (i.e., carbon dioxide ($CO_2$)) on the periphyton community is important to understand how and to what extent atmospheric conditions can affect the structure and dynamics of these communities in lotic systems. We investigated the influence of elevated $CO_2$ concentration on the periphyton community in the artificially constructed channels during the winter period. The channels made of acrylic paneling were continuously supplied with surface water discharged from a small reservoir, which was supported with ground water, at a flow rate of 5 L/min, and water temperature ranging $4-5^{\circ}C$. The effects of elevated $CO_2$ concentrations (790 ppm) were evaluated in comparison with the control (395 ppm $CO_2$) by analyzing pH, water carbon content and nutrients in water, periphyton composition and biomass, chlorophyll-a, ash-free dry-matter at 2-day intervals for 10 days. Results: After the addition of $CO_2$, significant decreases of pH, $NH_3-N$, and $PO_4-P$ (p < 0.05) and increases of chlorophyll-a, ash-free dry-matter, and the cell density of periphyton (p < 0.01) were observed, whereas the species composition of periphyton and water carbon content did not change. Conclusions: These results suggest that elevated $CO_2$ in flowing water system with low temperature could facilitate the growth of periphyton resulting in biomass increase, which could further influence water quality and the consumers throughout the food web.