• 한국공간구조학회논문집
• /
• 제7권3호
• /
• pp.87-95
• /
• 2007

The recent completions of free-form spatial structures provide us a very attractive form. To realize such an extraordinary shape, it is absolutely necessary that the connector systems have to be investigated the characteristics of the systems and analyzed with a practicable method. In this context, this research consists of not only literature research but also numerical analysis with selected connector systems, which was adopted in real free-form spatial structures. For numerical analysis, especially, finite element analysis (FEA) is performed with a various test parameter using a commercial program ANSYS. Consequently, the general characteristics of node connectors the moment-rotation-curves are presented by considering a large deformation effect as well as a multi-linear material properties.

• 한국공간구조학회논문집
• /
• 제12권1호
• /
• pp.77-85
• /
• 2012

막 구조물은 연성의 막에 초기 장력을 주고 외관의 강성을 늘림으로써 외부하중에 안정된 형태를 유지하는 구조물로 두께를 얇게 하여 대공간 구조에 많이 채택된다. 이러한 막 구조는 자유로운 곡선을 표현할 수 있는 특성이 있어, 구조적 형태의 선정은 매우 중요하다. 이에 본 논문에서는 넙스를 기저함수로 하는 비정형 곡면으로 형상을 표현하고, 최적의 곡면 형상 탐색을 위한 대변형 결과값 도출을 위해 기하학적 비선형을 고려한 유한요소해석법을 제안하였다. 또한, 형상 탐색 결과로 나타난 곡면의 형상 근사화의 최소화를 위해 유한 요소망으로 표현된 최종 형상을 다시 넙스로 구현하는 인터페이스 기법을 제안하여, 비정형 막 구조물의 최적 곡면을 표현하였다.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6673-6678
• /
• 2015

최근 빈번히 건설되고 있는 비정형 건축물들은, 개별부재의 수직/수평적 연결방식 에서 벗어나, 외관 및 내부 구성요소들의 단면이 자유롭게 변화되는 곡선의 형태를 띠고 있다. 이러한 구조물의 안정성 평가를 위해서 고전적 방식의 유한요소 해석기법이 적용된 상용프로그램이 사용되고 있으나, 과도한 절점분할 방식 또는 유한요소망(Finite Element Mesh)의 도입으로 인하여 해석시간이 길어지고 사용성 및 해석 정밀도가 낮은 문제점을 안고 있다. 따라서 본 연구에서는, 전술된 문제점을 개선하기 위하여, 임의의 곡률을 가진 단위 부재 및 단위요소에 대한 수학적 해석모형을 활용하여 비정형구조물에 대한 구조안정성 평가를 효과적으로 수행할 수 있는 전후처리 모듈을 개발하였다. 본 연구에서 개발된 전후처리 모듈은 곡선형 부재의 곡률을 NURBS 제어점을 이용하여 제어할 수 있도록 개발되었으며, 그로 인해 상용프로그램보다 빠른 형상 모델링이 가능하였다. 또한, 자유로운 형상에 대한 시각적 확인이 가능하여 비정형 건축물의 형상과 거동양상의 현실적인 묘사가 가능하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권8호
• /
• pp.1138-1144
• /
• 2012

This study was conducted to evaluate the efficacy of the dipeptide form of phenylalanine as a new source of amino acid in terms of growth performance and whole-body amino acid composition in comparison to the free form for red seabream (Pagrus major). Fish ($1.46{\pm}0.001g$) were fed four isonitrogenous and isocaloric experimental diets containing 0.7 or 1.4% phenylalanine either in free or dipeptide form. A feeding trial was carried out in three replicates and the fish were fed to apparent satiation for six weeks. At the end of the feeding trial, feed intake of fish was influenced by both phenylalanine form and level and significantly higher values were obtained at an inclusion level of 0.7% and by the use of dipeptide form. However, the other growth parameters did not significantly differ among treatments. Whole-body amino acid compositions revealed no significant changes in concentrations of both essential and non-essential amino acids regardless of the increase in phenylalanine levels or the use of its different forms. The finding in this study indicates that juvenile red seabream can utilize dipeptide phenylalanine as efficiently as free form without any undesirable effects on growth performance or whole-body amino acid composition.

• 한국공간구조학회논문집
• /
• 제14권1호
• /
• pp.51-59
• /
• 2014

Single layer free-form structures are being highlighted in the field of architecture due to its attractive shape. In these structures, node connecting system is very important because the node must resist bending and axial stress simultaneously. So the local and global stabilities of entire structure can be determined by the stiffness of node system. In this study, therefore, various types of bending test with axial force were performed. As a result, bending capacity with axial force of a new spherical node for free-form structure could be performed and structural capacities were checked to use in real structure.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.328-336
• /
• 2017

The exit surface of a lens is designed using a three-dimensional free-form expression in order to easily modify a curved surface. This enables the design of numerical values and mathematical things using three-dimensional free-form expression, and enhances precision because it can be fine-tuned via numerical control. The standard of "Classification of Luminaire Light Distribution" for outdoor lighting fixtures by IESNA is adopted in order to examine the correlation between three-dimensional free-form surface expression and lighting performance. The variation of light distribution type and range is analyzed using the values of maximum light intensity and 50% light intensity. The actual tolerance occurs owing to parameters such as the thickness of the lens, the distance between LEDs, and the movement of the center of the incident surface; the effects of changes in these parameters on the performance are compared and analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.9-23
• /
• 1993

Free-form surface machining is usually performed with an NC milling machine and a ball end milling cutter. Since this conventional method is basically sculpting on a plane, it is not suitable for three dimensional body machining. This article will introduce a new machining method for three dimensional body with free-form surface and newly developed machine tool suitable for such machining.

• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.106-114
• /
• 2010

The swept volume, the region of a moving object, is applied in many fields such as valid paths for motions of tools, visualization in robot paths and interference tests for parts assembling or disjointing. The shape of a swept volume depends on an generators computed with normal vectors of an object and velocity vectors of a motion. Although free-from surfaces are widely used to represent geometric models in CAD, computing the generators for a free-form object is a formidable task. Previous approaches exploit the closed form expressions of generators but limited to planer or quadric faces. In this paper, we propose the algorithm to compute swept volumes generated by free-form objects in screw motions. For the algorithm a tracing method is applied to the computation of generators. It considers curvatures of surfaces of an object to increase the computational accuracy. We implemented our algorithm in the CATIA V.5 environment to test the validity of our algorithm and to generate examples.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.291-294
• /
• 2000

Free-form surfaces arise in shipbuilding, automotive and aerospace industries. Specially compound free-form surfaces so do. Machining complicated products consist of compound surface, it is very important to avold and remove tool interferences. By the way, in compound surfaces the tool interference can occur not only in the tool path direction but also in the other direction. A new tool interference detection and correction using tool interference conditions is suggested to identify and correct the tool interference in compound surfaces.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.76-83
• /
• 2005

In this study a general method for computing offsets of free form curves is presented. In the method arbitrary free form curve is approximated with point series considering required tolerance. The point series are offset precisely using the normal vectors computed at each point and loop removal is carried out by the newly suggested algorithm. The resulting offset points are transformed to lines and arcs using the biarc approximation method. Tangent vectors for approximation of discrete points data are calculated by traditional local interpolation scheme. In order to show the validity and generality of the proposed method , various of offsettings are carried our for the base curves with complex shapes.