• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.883-891
• /
• 2016

In this paper, we propose an asymmetric dipole antenna utilizing the metal case as a ground radiator for a pen-type wireless presenter which operates in the ISM frequency band(2.4~2.48 GHz). A normal mode helix mounted on the top end of the long metallic cylinder case which acts as the ground plane takes the form of the asymmetric dipole structure in the proposed antenna. The metallic cylinder case which performs as a radiating element increases the inherent narrow bandwidth and low gain of the helix. The effects of the hand contacts with the metal case on the antenna performance are measured and analyzed with a specially designed human phantom. Experimental results show that the -10 dB return loss bandwidth of the proposed antenna in free space(no hand contact) is 200 MHz that ranges from 2.3 to 2.5 GHz and the maximum gain is measured to be 5 dBi. Under the normal operating condition where the metal case is contacted with a human hand, the bandwidth is 480 MHz from 2.24 to 2.72 GHz. The maximum gain is 2 dBi, lowered by 3 dB due to the hand contact.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.67-72
• /
• 2012

In recent days, the wire width of IC is narrowed and the degree of integration of IC is increased to obtain the higher capacity of the devices in electronic industry. And then the surface quality of FCCL(Flexible Copper Clad Laminate) became increasingly important. Surface defects on FCCL are bump, scratch, dent and so on. In particular, bumps cause low reliability of the products. Even though there are bumps on the surface, if leveling characteristic of plating solution is good, it does not develop significant bump. In this study, the leveling characteristics of additives are investigated. The objective of study is to improve the leveling characteristic and reduce the surface step through additives and plating conditions. The additives in the electrodeposition bath are critical to obtain flat surface and free of defects. In order to form flat copper surface, accelerator, suppressor and leveler are added to the stock solution. The reason for the addition of leveler is planarization surface and inhibition of the formation of micro-bump. Levelers (SO(Safranin O), MV(Methylene Violet), AB(Alcian Blue), JGB(Janus Green B), DB(Diazine Black) and PVP(Polyvinyl Pyrrolidone) are used in copper plating solution to enhance the morphology of electroplated copper. In this study, the nucleation and growth behavior of copper with variation of additives are studied. The leveling characteristics are analyzed on artificially fabricated Ni bumps.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1804-1820
• /
• 1997

In this paper, an efficient call control procedure is presented for next generation wireless ATM networks and its performance is mathematically analyzed using the open queueing network. This procedure is based on a new scheme called as the cell clustering. When we use the cell clustering scheme, at the time that a mobile connection is admitted to the network, a virtual cell is constructed by choosing a group of neighboring base stations to which the call may probabilistically hand over and by assigning to the call a collection of virtual paths between the base stations. Within a microcell/picocell environment, it is seen that the cell clustering can support effectively a very high rate of handovers, provides very high system capacity, and guarantees a high degree of frequency reuse over the same geographical region without requiring the intervention of the network call control processor each time a handover occurs. But since mobiles, once admitted, are free to roam within the virtual cell, overload condition occurs in which the number of calls to be handled by one base station to exceed that cell site's capacity of radio channel. When an overload condition happens, the quality of service is abruptly degraded. We refer to this as the overload state and in order to quantify the degree of degradation we define two metrics, the probability of overload and the normalized average time spent in the overload state. By using the open network queueing model, we derive closed form expressions for the maximum number of calls that can be admitted into the virtual cell such that the two defined metrics are used as the acceptance criteria for call admission control.

• Applied Microscopy
• /
• v.23 no.2
• /
• pp.53-77
• /
• 1993

In this study, an attempt was made to investigate the probable organelles participating in the secretion of biligrafin. The animals (ICR male mice, 25-30gm) were divided into normal control and 6 biligrafin injected groups to which 30% biligrafin (0.006ml/gm b.w.) were injected at 10, 20, 40, 80, 160 and 320 min prior to the sampling. The mice of each group were perfused through the heart with ice-cold 2.5% glutaraldehyde buffered with 0.1M Na-cacodylate (pH. 7.4) under the Na-pentobarbital (Nembtal 0.0015mg/gm b.w.) anesthesia and liver tissues were taken from each group. Some specimens were immersed 1 hr in the same solution used in the perfusion. After an overnight rinse in 0.1M Na-cacodylate buffer containing 10% DMSO and 7.6% sucrose, $75{\mu}m$ fronzen sections were made for cytochemical study. The sections were incubated in thiamin pyrophosphatase (TPPase) and inosine diphosphatase (ID Pase) media for 70 min at $37^{\circ}C$ respectively and acid phosphatase (AcPase) medium for 40 min at $37^{\circ}C$. They were postfixed in 1 % $OsO_4$ for 1 hr. The other specimens were immersed for 8 hrs in the fixative consisting of 2.5% glutaraldehyde and 3.0% paraformaldehyde buffered with Na-cacodylate (pH. 7.4). All of the osmificated specimens were processed for electron microscopy. In both normal and biligrafin injected groups, endoplasmic reticulum (ER), vacuoles, Golgi apparatus and lysosomes were seen in the vicinity of bile canaliculus. In the biligrafin injected groups, however, the Golgi apparatus appeared to be decreased and ER and vacuoles were dilated and increased. The rough endoplasmic reticulum (RER) having a few attached ribosomes appeared to be the round saccule, especially at 20 min after biligrafin injection. Smooth endoplasmic reticulum (SER) seemed to be formed by the detachment of ribosomes at the cisternal end of RER. The cistern of SER showed saccules which probably budded off to form the vacuole. The vacuoles were devoid of visible centents. This finding seemed to be in agreement with the biochemical property of the bile constituents. The fusion between the vacuoles and bile canaliculus were frequently seen in the groups injected with biligrafin. The lysosome did not show any changes in the biligrafin injected groups. Accumulation of some material and lipid droplets were seen at the 40 and 80 min after biligrafin injection, especially at the latter. At 160 and 320 min after biligrafin injections, however, they were decreased successively while the RER stack, free ribosomes and polysomes were increased. Although the reactive products of TPPase and IDPase were observed in the ER saccules and vesicles of the normal control and biligrafin injected groups, the fusion between the bile canaliculus and saccules or vesicles could easily be seen in the latter. The AcPase activity, however, was observed in the cistern at the maturing face of Golgi apparatus and lysosomes in both normal and biligrafin groups. The results suggest that the biligrafin is excreted via the vesicles, vacuoles or sacoules probably derived from the SER without the participation of Golgi apparatus and lysosomes, and the excess amount of material is stored as inclusions during the repairing of the organelles being overactive.

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.79-84
• /
• 1996

A $1\;{\mu}m$ thick n-type GaAs layer with Si doping density of $1{\times}10^{17}/cm^{3}$ and a $500{\AA}$ thick undoped single crystalline AlAs layer were subsequently grown by molecular beam epitaxy on the $n^{+}$ GaAs substrate. The AlAs/GaAs layer was oxidized in $N_{2}$ bubbled $H_{2}O$ vapor($95^{\circ}C$) ambient at $400^{\circ}C$ for 2 and 3 hours. From the result of XPS analysis, small amounts of $As_{2}O_{3}$, AlAs, and elemental As were found in the samples oxidized up to 2 hours. After 3 hours oxidation, however, various oxides related to As were dissolved and As atoms were diffused out toward the oxide surface. The as-grown AlAs/GaAs layer was selectively converted to $Al_{2}O_{3}/GaAs$ at the oxidation temperature $400^{\circ}C$ for 3 hours. The oxidation temperature and time is very critical to stop the oxidation at the AlAs/GaAs interface and to form a defect-free surface layer.

• Smart Media Journal
• /
• v.6 no.1
• /
• pp.16-21
• /
• 2017

Long time has passed since computers which used to be a means of research were commercialized and available for the general public. People used writing instruments to write before computer was commercialized. However, today a growing number of them are using computers to write instead. Computerized word processing helps write faster and reduces fatigue of hands than writing instruments, making it better fit to making long texts. However, word processing programs are more likely to cause spelling errors by the mistake of users. Spelling errors distort the shape of words, making it easy for the writer to find and correct directly, but those caused due to users' lack of knowledge or those hard to find may make it almost impossible to produce a document free of spelling errors. However, spelling errors in important documents such as theses or business proposals may lead to falling reliability. Consequently, it is necessary to conduct research on high-level spelling error correction programs for the general public. This study was designed to produce a system to correct sentence-level spelling errors to normal words with Korean alphabet similarity algorithm. On the basis of findings reported in related literatures that corrected words are significantly similar to misspelled words in form, spelling errors were extracted from a corpus. Extracted corrected words were replaced with misspelled ones to correct spelling errors with spelling error detection algorithm.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.415-423
• /
• 2009

The purpose of this study is to investigate the response of human pulp cell on Portland cement mixed with $\beta$-glycerophosphate. To investigate the effect of $\beta$-glycerophosphate and/or dexamethasone on human pulp cell, ALP activity on various concentration of $\beta$-glycerophosphate and dexamethasone was measured and mineral nodule of human pulp cell was stained with Alizarin red S. MTS assay and ALP activity of human pulp cell on Portland cement mixed with various concentration of $\beta$-glycerophosphate (10 mM, 100mM, 1M) was measured and the specimens were examined under SEM. Addition of $\beta$-glycerophosphate or dexamethasone alone had no effect however, the addition of 5 mM $\beta$-glycerophosphate and 100 nM dexamethasone had the largest increasement in ALP activity. There was no toxicity in all samples and the data showed that Portland cement mixed with 10 mM $\beta$-glycerophosphate had more increase in ALP activity compared with control. In conclusion, Portland cement mixed with $\beta$-glycerophosphate has no toxicity and promotes differentiation and mineralization of pulp cell compared with additive-free Portland cement. This implicated that application of Portland cement mixed with $\beta$-glycerophosphate might form more reparative dentin and in turn it would bring direct pulp capping to success.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.496-502
• /
• 2015

Facilitated transport is one of the possible solutions to simultaneously improve permeability and selectivity, which is challenging in conventional polymer-based membranes. Olefin/paraffin separation using facilitated transport membrane has received much attention as an alternative solution to the conventional distillation process. Herein, we report olefin separation composite membranes based on the polymer blends containing $AgBF_4/Al(NO_3)_3$ mixed salts. Free radical polymerization process was used to synthesize an amphiphilic graft copolymer of poly(dimethyl siloxane)-graft- poly(ethylene glycol) methyl ether methacrylate (PDMS-g-POEM). In addition, poly(ethylene oxide) (PEO) was introduced to the PDMS-g-POEM graft copolymer to form polymer blends with various ratios. The propylene/propane mixed-gas selectivity and permeance reached up to 5.6 and 10.05 GPU, respectively, when the PEO loading was 70 wt% in polymer blend. The improvement of olefin separation performance was attributed to the olefin facilitating silver ions as well as the highly permeable blend matrix. The stabilization of silver ions in the composite membrane was achieved through the introduction of $Al(NO_3)_3$ which suppressed the reduction of silver ions to silver particles.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.77-86
• /
• 2008

Firstly, this study is to compare two types of productivity changes in Seoul's urban bus industry by public transport reforms: one with considering accident costs (ML), the other without considering accident costs (M). The directional distance function (DDF), which is a form of data envelopment analysis, and the Malmquist (Luenberger) productivity index (ML, M) are used for the analysis. The results show that productivity increased regardless of accident costs over time, and the ML index is a little higher than the M index, which means that most firms experienced more of a reduction ratio of accident costs than a reduction ratio of inputs. Secondly, this paper is to analyze how reforms affect productivity changes. The results show that operational speed improvements or passenger increases most affect productivity increases, which means that the installment of median bus lanes or introduction of free transfers among public transport modes were effective in reducing both inputs and accident costs. However, operational system reforms including mid-public management were related with productivity changes but they were not as effective.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.74-74
• /
• 2010

One-dimensional nanosturctures such as nanowires and nanotube have been mainly proposed as important components of nano-electronic devices and are expected to play an integral part in design and construction of these devices. Silicon carbide(SiC) is one of a promising wide bandgap semiconductor that exhibits extraordinary properties, such as higher thermal conductivity, mechanical and chemical stability than silicon. Therefore, the synthesis of SiC-based nanowires(NWs) open a possibility for developing a potential application in nano-electronic devices which have to work under harsh environment. In this study, one-dimensional nanowires(NWs) of cubic phase silicon carbide($\beta$-SiC) were efficiently produced by thermal chemical vapor deposition(T-CVD) synthesis of mixtures containing Si powders and hydrocarbon in a alumina boat about $T\;=\;1400^{\circ}C$ SEM images are shown that the temperature below $1300^{\circ}C$ is not enough to synthesis the SiC NWs due to insufficient thermal energy for melting of Si Powder and decomposition of methane gas. However, the SiC NWs are produced over $1300^{\circ}C$ and the most efficient temperature for growth of SiC NWs is about $1400^{\circ}C$ with an average diameter range between 50 ~ 150 nm. Raman spectra revealed the crystal form of the synthesized SiC NWs is a cubic phase. Two distinct peaks at 795 and $970\;cm^{-1}$ over $1400^{\circ}C$ represent the TO and LO mode of the bulk $\beta$-SiC, respectively. In XRD spectra, this result was also verified with the strongest (111) peaks at $2{\theta}=35.7^{\circ}$, which is very close to (111) plane peak position of 3C-SiC over $1400 ^{\circ}C$ TEM images are represented to two typical $\beta$-SiC NWs structures. One is shown the defect-free $\beta$-SiC nanowire with a (111) interplane distance with 0.25 nm, and the other is the stacking-faulted $\beta$-SiC nanowire. Two SiC nanowires are covered with $SiO_2$ layer with a thickness of less 2 nm. Moreover, by changing the flow rate of methane gas, the 300 sccm is the optimal condition for synthesis of a large amount of $\beta$-SiC NWs.