• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.427-433
• /
• 2002

An inverter-driven induction motor is usually adapted to the traction motor for a high speed drive system requiring safety, reliability, performance, compact size owing to the space and weight alloted for attaching to train, etc. and AC Traction motor for G7 train will be operated in the worst condition such as mechanical vibration, limited mounting space, severe thermal stress, inverter with non-sinusoidal voltage waveform, dust and so on. therefore, design procedure must be carefully carried out wi th considering the motor size, vibration and thermal expansion of rotor bars, insulation system, reliability of frame, as well as output characteristics. In this paper, we will inform the characteristics and design of the traction motor for G7 train and also analyze the test result of it.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.150-151
• /
• 2013

Recently, the internal space organization of the building changes to the frame construction and flat slab construction in the wall type structure. And the use of light weight panel changing the internal joint use easily is increased. Therefore, in this research, the length change characteristic that the magnesium chloride addition rate reaches to the magnesium curing body tries to be studied. It could confirm according to the length change specific result that the magnesium chloride amount of addition reaches to the magnesium oxide curing body to expand. And the thing described below was the large-scale expansion the magnesium oxide addition rate 60%. And it showed up as 50, 40, 30, 20, and order of 10s (%). It could look at to form the hydrate of the SEM picture result needle-shaped of the Hardened.

• 대한기계학회논문집B
• /
• 제30권3호
• /
• pp.215-221
• /
• 2006

A stereoscopic particle tracking velocimetry (SPTV) technique based on the 2-frame hybrid particle tracking velocimetry (PTV) method was developed. The expansion of 2D PTV to SPTV is facilitated by the fact that the PTV method tracks individual particle centroids. To evaluate the performance and measurement accuracy of the present SPTV technique, it was applied to flow images of rigid body translation and synthetic standard images of jet shear flow and impinging jet flow. The data processing routine and measurement uncertainty of the SPTV technique are compared with those of conventional stereoscopic particle image velecimet.y (SPBV). In addition, the centroid translation effect of 2D particle image velocimetry (PIV) is defined and its effect on SPIV measurements is discussed. Compared to the SPIV method, the SPTV technique has inherited merits of concise and precise velocity evaluation procedures and provides better spatial resolution and measurement accuracy.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.830-835
• /
• 1994

In this paper, a new method of statistically evaluating an output response probability distribution of a memory type non-linear system is practically derived based on a zero-memory type non-linear equivalent system. That is, first, the objective system is approximately and functionally separated into two functional parts, i.e., a zero-memory type non-linear part and a memory type linear part according to the well-known Wiener's idea. A whole mathematical frame of the output probability distribution is evaluated in an approximate but generalized form, based on the equivalent zero-memory type non-linear part. The memory effects between the input and the output of the system are reflected in the statistical parameters and the expansion coefficients.

• Smart Structures and Systems
• /
• 제15권1호
• /
• pp.81-97
• /
• 2015

Recently, a new output-only modal identification method based on time-frequency independent component analysis (ICA) has been developed by the authors and shown to be useful for even highly-damped structures. In many cases, it is of interest to identify the complex modes of structures with non-proportional damping. This study extends the time-frequency ICA based method to a complex ICA formulation for output-only modal identification of non-proportionally-damped structures. The connection is established between complex ICA model and the complex-valued modal expansion with sparse time-frequency representation, thereby blindly separating the measured structural responses into the complex mode matrix and complex-valued modal responses. Numerical simulation on a non-proportionally-damped system, laboratory experiment on a highly-damped three-story frame, and a real-world highly-damped base-isolated structure identification example demonstrate the capability of the time-frequency complex ICA method for identification of structures with complex modes in a straightforward and efficient manner.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.78-81
• /
• 2019

In this study, we will analyze the design, development and application of these small drones using open source. These drones are used in flight exercises, aerial photography, and coding education. In the era of the fourth industrial revolution, such as the development of sensor technology, expansion of open source sharing, and application of artificial intelligence, Is expected to be able to demonstrate convergence. In this paper, we have studied the design and fabrication of small drones using open source. In the case of drones, various functions and differentiated materials are required depending on the application, and the future development of the unmanned mobile object, namely the drone, in which the creativity and the technology are combined with each other continues to be enhanced by the improvement of autonomy and artificial intelligence. Software-based architecture-based technologies have been developed in collaboration with embedded SWs that combine sensors, motors, and control systems. In hardware, it is customary to use a combination of materials and design to increase the freedom of design. It will be made in a free structure.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.375-378
• /
• 2016

The difficulty of "information sharing", "information reusing" issues happening in Wireless Sensor Network is due to the heterogeneity of the application environment, data processing, communication protocol etc. Based on the introduction of the Ontology theory, though analyzing the sensor characteristic a general type of sensor ontology contains the definition of concept, frame structure and OWL design was proposed from the standpoint of sensor observation. The paper expounded a system framework of the domain ontology through the expansion of knowledge base on the general sensor could achieve the information sharing and reuse by semantic communication between the general sensor ontology and user. The research of this method would bring new idea to the semantic sensor network construction.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.54-55
• /
• 2021

This study compared the fire safety standards for windows of Korea, the U.S. and Japan to prevent fire expansion through exterior wall openings, and conducted experiments using PVC and aluminum window frames, which are widely used in Korea.The experiment is KS F 2845 which combines frames of the same thickness and area with single-window form and 1 hour fire resistance glass with 8T thickness. Experiments showed that the PVC window was about 9 minutes and the aluminum window was about 26 minutes. However, in Korea, there are no test standards for windows installed at the opening of the exterior wall. In addition, fire safety standards for windows shall be established along with the designation of fire prevention zones.

• 콘크리트학회논문집
• /
• 제24권4호
• /
• pp.453-463
• /
• 2012

강합성 라멘교는 교대 일체식 교량과 같이 유지보수의 주된 원인이 되는 신축이음 및 받침이 생략되어 유지관리 및 구조적인 장점을 얻을 수 있는 교량 형식이다. 통상적인 강합성 라멘교는 강재로 제작된 거더의 일부를 교대에 매립하는 형태로 거더와 교대가 일체화된다. 거더를 교대에 매립하는 형태의 거더-교대 접합부는 시공상세가 복잡하고 접합부의 상세에 따라 공사비가 증가하는 원인이 될 수 있다. 최근, 기존 강합성 라멘교의 거더-교대 접합부의 시공상세를 간략화하여 시공효율 향상시킨 PIC 거더교가 제안되었다. PIC 거더교는, 거더를 교대에 매립하는 상세 대신, PS 강봉을 이용하여 거더와 교대를 일체화하는 접합부 상세를 가지고 있다. 이 연구에서는 PIC 거더교의 거더-교대 접합부에 대한 거동을 검토하기 위하여 실물모형실험체를 이용한 정적재하실험을 수행하였다. 실험 결과, PS 강봉에 의해 체결되는 거더-교대 접합부는 충분한 내력을 확보하고 있는 것으로 확인되었다. 다만, 균열에 대한 사용성을 확보하기 위해서는 교대 상부에 발생하는 균열을 제어하기 위한 철근 배근이 필요할 것으로 판단된다.

• 헤리티지:역사와 과학
• /
• 제45권3호
• /
• pp.100-113
• /
• 2012

최근 활발한 발굴조사가 이루어지는 가운데 영남지방에서 신라기와가 다량 출토되고 있다. 이들 중에는 특히 경주에서 출토되는 신라기와와 동범관계의 기와가 확인된다. 이에 영남지역의 신라시대막새에 대해서 경주지역 출토품과 비교하여 문양구성 등이 동일한 막새 중 동범막새와 동형막새로 구분하고 검토해 보았다. 그 중에서 특히 주목되는 유적은 인각사이다. 인각사 발굴조사에서 출토된 신라기와 중 연화문수막새를 포함한 당초문암막새 등 일부가 경주 월성과 황룡사지 등에서 출토되는 막새와 같은 틀로 제작한 동범막새의 관계인 것으로 판단된다. 이는 경주에서 제작된 막새가 각 지방으로 직접 이동한 경우와, 와범만이 이동하여 현지에서 제작된 경우, 와공이 이동하여 현지에서 제작한 경우로 정리해 볼 수 있다. 지방출토 신라기와는 인각사의 경우, 시기를 구분하여 나타나는 기와의 양상을 통해서 공존과 확장, 그리고 보수가 거듭된 상황을 파악할 수 있다. 이러한 정황은 경주로부터 비단 한시적으로 공급된 것이 아닌 지속적 관계로 이해하는 단서로서 의미가 깊다고 하겠다. 한편 신라기와가 경주에서 생산되어 각 지방으로 유입되는 과정에서도 직접유입이 이루어졌다면, 여러 가지 조건에 의해 육로운송 보다는 수로운송이 유리하였을 것으로 생각된다. 이는 대상 유적이 크고 작은 강과 하천 부근에서 확인된 것과도 깊은 연관이 있을 것으로 판단된다.