• Nuclear Engineering and Technology
• /
• 제34권2호
• /
• pp.105-116
• /
• 2002

In special industrial fields such 3s nuclear power plants and chemical plants, it is often necessary to repair system components without plant shutdown or drainage of system having many piping structures which may have hazardous or expensive fluid. A temporary ice plugging method for blocking internal flow is considered as a useful method in that case. According to the pipe freezing guideline of the nuclear power plant, the length of a freezing jacket must be longer than twice of the pipe diameter. However, for applying the ice plugging to short pipes which do not have enough freezing length because of geometrical configuration, it is inevitable to use shorter jacket less than twice of the pipe diameter. In this study, the integrity evaluation for short pipes in the nuclear power plant Is conducted by an experiment and the finite element analysis. From the results, the ice plugging process in short pipes can be safely carried out without any plastic deformation and fracture.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.75-83
• /
• 2004

Ice rubble pieces broken by the bow impact load and side hull of an icebreaking vessel usually pass along the ship's bottom hull and may hit the propeller/rudder or other stern structures causing serious damage to ship's hull . Therefore it is important to estimate the size of broken ice pieces during the icebreaking process. The dynamic interaction process of icebreaker with infinite ice sheet is simplified as a wedge type beam of finite length supported by elastic foundation. The wedge type ice beam is leaded with vertical impact forces due to the inclined bow stem of icebreaking vessels. The numerical model provides locations of maximum dynamic bending moment where extreme tensile stress arises and also possible fracture occurs. The model can predict a failure length of broken ice sheet given design parameters. The results are compared to Nevel(1961)'s analytical solution for static load and observed pattern of ice sheet failure onboard an icebreaker. Also by comparing computed failure length with the characteristic length, the meaning of ice rubble sizes is discussed.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.42-48
• /
• 2011

To define ice as a solid material, mathematical and physical characteristics and their application examples are investigated for several materials' yield functions which include isotropic elastic, isotropic elastic-plastic, classical Drucker-Prager, Drucker-Prager Cap, Heinonen's elliptic, Derradji-Aouat's elliptic, and crushable foam models. Taking into account brittle failure mode of ice subject to high loading rate or extremely low temperature, isotropic elastic model can be better practicable than isotropic elastic-plastic model. If a failure criterion can be properly determined, the elastic model will provide relatively practicable impact force history from ice-hull interactions. On the other hand, it is thought that the soil models can better predict the ice spalling mechanism, since they contain both terms of shear stress-induced and hydrostatic stress-induced failures in the yield function.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.87-97
• /
• 1992

극지방의 천연자원의 수송에 필수적인 빙해항행선박은 금후 우리나라의 조선산업이 지향해야 할 기술집약형 선박중 하나로서 국제경쟁에 대비하여 독자적인 연구가 요구되는 분야이다. 본 연구는 빙해항행선박 기본설계의 중요한 인자인 선수부 형상과 평탄빙에서의 쇄빙능력 사이의 상관관계를 밝히는데 목적이 있다. 통상 평탄빙(level ice)에서 선박의 전진속도를 3-4 knots로 볼 때, 탄성으로 취급되는 얼음의 재료특성을 고려하여, 파괴시킬 수 있는 얼음의 최대두께와 파괴된 얼음의 특성길이를 수치적으로 추정하는데 주안점을 두고 있다. 본 연구에서는 빙해항행 선박이 평탄빙에서 연속쇄빙을 하고 있는 상황을 탄성지지기반 위에 놓인 유한 길이의 쐐기보에 작용한 충격하중의 문제로 가정하고 굽힘모멘트에 의해 어떤 위치에서 발생한 최대인장응력이 얼음의 굽힘파괴강도에 도달한다면 그 부분에서 파단이 일어날 가능성이 가장 높다고 판단한다.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.411-420
• /
• 2019

It is essential to design crashworthy marine structures for operations in Arctic regions, especially ice-covered waters, where the structures must have sufficient capacity to resist iceberg impact. In this study, a numerical analysis of a colliding accident between an iceberg and stiffened plates was carried out employing the commercial finite element code ABAQUS/Explicit. The ice material model developed by Liu et al. (2011) was implemented in the simulations, and its availability was verified by performing some numerical simulations. The influence of the ambient temperature on the structural resistance was evaluated while the local stress, plastic strain, and strain energy density in the structure members were addressed. The present study revealed the risk of fracture in terms of steel embrittlement induced by ambient temperature. As a result, the need to consider the possibility of brittle failure in a plate-stiffener junction during operations in Arctic regions is acknowledged. Further experimental work to understand the structural behavior in a plate-stiffener junction and HAZ is required.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.857-868
• /
• 2005

This paper deals with the accumulated damage in concrete structures due to the cyclic freeze-thaw as an environmental load. The cyclic ice body nucleation and growth processes in porous systems are affected by the thermo-physical and mass transport properties, and gradients of temperature and chemical potentials. Furthermore, the diffusivity of deicing chemicals shows significantly higher value under cyclic freeze-thaw conditions. Consequently, the disintegration of concrete structures is aggravated at marine environments, higher altitudes, and northern areas. However, the properties of cyclic freeze-thaw with crack growth and diffusion of chloride ion effects are hard to be identified in tests, and there has been no analytic model for the combined degradations. The main objective is to determine the driving force and evaluate the reduced strength and stiffness by freeze-thaw. For the development of computational model of those coupled deterioration, micro-pore structure characterization, pore pressure based on the thermodynamic equilibrium, time and temperature dependent super-cooling with or without deicing salts, nonlinear-fracture constitutive relation for the evaluation of internal damage, and the effect of entrained air pores (EA) has been modeled numerically. As a result, the amount of ice volume with temperature dependent surface tensions, freezing pressure and resulting deformations, and cycle and temperature dependent pore volume has been calculated and compared with available test results. The developed computational program can be combined with DuCOM, which can calculate the early aged strength, heat of hydration, micro-pore volume, shrinkage, transportation of free water in concrete. Therefore, the developed model can be applied to evaluate those various practical degradation cases as well.

• 대한치과기공학회지
• /
• 제37권4호
• /
• pp.243-250
• /
• 2015

Purpose: The aim of this study was to investigate the shear bond strength between various commercial zirconia coping and veneering ceramic, and to observe the failure mode. Methods: For each zirconia block (iJAM Emerald, LUXEN Smile block, ICE Zirkon transluzent), 10 rectangular specimens were layered with Cercon ceram kiss, IPS e.max ceram, ICE Zirkon ceramic according to recommended by the manufacturer. The shear bond strength tests of the veneering porcelain to zirconia were carried out until fracture by a universal testing machine. After the shear bond tests, failure modes were characterized visually, under a stereomicroscope, such as adhesive, cohesive, or mixed. Data were analyzed with One-way ANOVA followed by Scheffe's tests. Results: The shear bond strength ($mean{\pm}SD$) of zirconia-veneer ceramic were JC group $13.9{\pm}3.6MPa$; JE group $17.7{\pm}2.4MPa$; JI group $15.1{\pm}2.5MPa$; LC group $9.5{\pm}1.5MPa$; LE group $16.2{\pm}2.3MPa$; LI group $12.6{\pm}0.8MPa$; ZC group $16.0{\pm}2.3MPa$; ZE group $18.5{\pm}3.4MPa$; and ZI group $15.3{\pm}3.2MPa$. The One-way ANOVA showed a significant difference between groups (p<0.05). The failure mode in most experimental groups was mixed failure, except for the LC group, which showed adhesive failure, and JE group, LE group and ZE group showed cohesive failure. Conclusion: For IPS e.max ceram, the shear bond strength value was highest for all kinds of zirconia blocks. For ICE Zirkon transluzent, the shear bond strength value was highest for all kinds of veneering ceramics. Most of experimental group interfaces revealed mixed failure mode.

• 자원환경지질
• /
• 제39권2호
• /
• pp.163-171
• /
• 2006

본 연구는 단열지질조사를 통한 대상지역의 지하수 단열 모델을 규명하여 지하수를 개발한 사례이다. 경기도 문산 동쪽에 위치하고 있는 산업시설물에서는 시설물 유지에 필요한 용수 수급용 지하수개발이 요구되었다. 지하수 개발 대상 지역은 $0.15Km^2$ 면적으로 제한되어 있었을 뿐만 아니라, 지하 매설물, 건물 등의 시설물을 피하여 선정, 개발해야 되는 매우 어려운 지리적 조건을 가지고 있었다. 지하수 개발 대상지역은 지하 매설물이 설치되어 있어 지구물리탐사가 불가한 곳으로 지질조사에만 의존하여 지하수개발을 수행하였다. 편마암의 엽리와 암상조사로 엽리 궤적도를 작성하며 조사대상지역에 발달하고 있는 남북방향 습곡축의 향사형 습곡이 인지되었다. 동서방향의 지질단면 분석에서는 아이스크림 스푼 모양의 F2 향사형 중첩습곡이 해석된다. 광역조사에서 인지된 $N20^{\circ}E,\;N30^{\circ}W$, NS 주향의 단층연장 상에 위치하는 평평한 조사대상지역에 수반성 인장단열들의 존재 가능성을 예측하였다. 우수향 운동감각을 갖고 있는 $N20^{\circ}E$ 단층 은 F2 향사형 습곡에 발달하고 있는 두 조의 요곡성 공액형인 P-전단단층으로 해석된다. NE 주향 지질단면상에서, $N20^{\circ}E$ 단층과 엽리 간의 교각으로 약 100m 심도에서 지하수저장이 가능한 삼각 프리즘형태의 공간형성이 가능함을 알 수 있어, 중첩습곡의 서쪽 날개 쪽이 지하수개발 가능지역으로 예측하였다 또한 $N40^{\circ}E$ 단층도 지하수공급원이 될 수 있다. 단열지질조사와 단면해석을 기초로 하여 $N20^{\circ}E$와 $N40^{\circ}E$ 단층을 따라서 지하수 개발가능 위치를 선정하였으며, $N20^{\circ}E$ 단층선 상에 위치한 한 지점을 선정한 결과 이곳에서 145 ton/day의 지하수를 개발하였다. 결론적으로 개발에 성공한 지하수는 중첩습곡에 수반된 요곡단층과 엽리 교차로 형성된 지하수 저장고의 불투수 공간으로부터 공급된 것으로 해석되었다.

• 한방재활의학과학회지
• /
• 제20권4호
• /
• pp.73-81
• /
• 2010

Objectives : The purpose of this study is to establish literatural evidence about thermotherapy and cryotherapy for Korean medicine through literatural review. Methods : Applicable paragraphs which were related to the thermotherapy and cryotherapy of cutaneous and muscle meridian were phrased from in "Yibujicheng(醫部集成) and "Dongyibaojian(東醫寶鑑)" where were archiving of Oriental or Korean medicine literatures. Searched paragraphs were analysed for establishing historical and theoretical bases of thermotherapy and cryotherapy in Korean medicine. Results : Thermotherapy of cutaneous and muscle meridian(經皮經筋溫熱療法) such as hot pack, warm water therapy, paraffin bath, ultrasound is originated from yu(慰) warm water(溫水) hot water(熱水). Matching indications are various pain conditions(caused by coldness(寒), hard-work(僗若), extravasated blood(瘀血), inflammatory skin disease, frostbite and several internal diseases. It also treats gynecological diseases and facial palsy. Diathermic therapy on acupuncture points(穴位照射溫熱療法) such as infra-red, microwave, shortwave is originated from huolu(火爐), wenlu(溫爐), xianglu(香爐), lamp light(燈火). Its objective is to improve the effects of herb medicine by aiding sweating or to treat the residual symptoms of fever disease or to care skin disease and pain from bone fracture, contusion. Cryotherapy of cutaneous and muscle meridian(經皮經筋溫寒冷療法) such as ice pack, ice spray, iced whirpool, cool water bath is originated from lengfu(冷敷), lengtie(冷貼), lengshiyu(冷石熨). Matching indications are contusions, animal bite injury, corn(肉刺) and (淋病), eye disease, nasal bleeding, hemorrhoid, inflammatory skin disease and chicken pox. Conclusions : Thermotherapy and cryotherapy of cutaneous and muscle meridian(經皮經筋溫冷療法) are the treatments which were used in Korean medicine from the ancient Korean medicine. As scientific equipments were originated from yu(慰), huolu(火爐), wenlu(溫爐), xianglu(香爐), lamp light(燈火). lengfu(冷敷), lengtie(冷貼), lengshiyu(冷石熨). It can be said that these are elements of Korean medicine. More rigorous studies are needed to establish clinical evidence about not only thermotherapy and cryotherapy but also the other physiotherapy of Korean medicine.

• 한국재료학회지
• /
• 제30권5호
• /
• pp.231-238
• /
• 2020

The composition of martensite transformation in NiAl alloy is determined using pure nickel and aluminum powder by vacuum hot press powder metallurgy, which is a composition of martensitic transformation, and the characteristics of martensitic transformation and microstructure of sintered NiAl alloys are investigated. The produced sintered alloys are presintered and hot pressed in vacuum; after homogenizing heat treatment at 1,273 K for 86.4 ks, they are water-cooled to produce NiAl sintered alloys having relative density of 99 % or more. As a result of observations of the microstructure of the sintered NiAl alloy specimens quenched in ice water after homogenization treatment at 1,273 K, it is found that specimens of all compositions consisted of two phases and voids. In addition, it is found that martensite transformation did not occur because surface fluctuation shapes did not appear inside the crystal grains with quenching at 1,273 K. As a result of examining the relationship between the density and composition after martensitic transformation of the sintered alloys, the density after transformation is found to have increased by about 1 % compared to before the transformation. As a result of examining the relationship between the hardness (Hv) at room temperature and the composition of the matrix phase and the martensite phase, the hardness of the martensite phase is found to be smaller than that of the matrix phase. As a result of examining the relationship between the temperature at which the shape recovery is completed by heating and the composition, the shape recovery temperature is found to decrease almost linearly as the Al concentration increases, and the gradient is about -160 K/at% Al. After quenching the sintered NiAl alloys of the 37 at%Al into martensite, specimens fractured by three-point bending at room temperature are observed by SEM and, as a result, some grain boundary fractures are observed on the fracture surface, and mainly intergranular cleavage fractures.