• 공학교육연구
• /
• 제15권1호
• /
• pp.61-71
• /
• 2012

The core issue of ethical problem solving in engineering is to understand what exactly happened and to define its nature. Problems often arise mostly in morally complex situations. Traditional philosophical theories usually focus on extreme conflicts of interest and suggest moral theory-centered problem solving methods. However, these methods are not only difficult to specifically apply to real situations, but also are likely to fail to deal with actual moral issues in engineering fields. This study aims to develop more desirable ethical problem solving methods, based on STS (Science and Technology Studies) and engineering ethics combined. First, we have examined the engineering ethics with implications of an STS perspective, then have analyzed traditional ethical problem solving methods in a critical point of view. This study will suggest a new ethical problem solving method named Matrix Guide, based upon those analyses. Specifically, this study classifies four stages of problem definition, analysis, solving, and feedback. Here, we focus on how to combine technological and non-technological factors in each stage, when we are facing morally complex situations in engineering sectors.

• 한국생활과학회지
• /
• 제12권1호
• /
• pp.39-52
• /
• 2003

This study was conducted to find how to manage the household financial situation and what households demand to financial organization for their satisfaction in Chungbuk Province. The questionnaire survey was implemented from 24th of Oct. for two months and 330 households data among 350 households were analyzed and selected as a sample. The results were as follows : 1. Many households had four to six bankbooks and wives visited financial organs more frequently than their husbands. 2. Although many respondents regarded the safety as the most important point when they selected the financial organ, they were choosing the organ because of the nearness form their own house. 3. How to manage the households' financial situations and how much they were satisfied with the financial organs were different by the respondents' age and education level. 4. The younger they were and the higher the education level was, they managed the household according to the financial plan. Female consumers were more satisfied with financial organs than male did. 5. The financial problem were solved through the couple's communication in many households. This study showed the tendency that the wives' power increasing in the households's decision-making about financial problems.

• 한국도서관정보학회지
• /
• 제3권
• /
• pp.1-31
• /
• 1976

If Y'ational developments are depend on the dex-elopment of regional >ociety and de~.elopment of regional society are rely on intellcctual delrelopment of members of regional society, going abreas! oi economic capacity. Estnhlis!l:r,ent of libraries as a treasure-house of mental resources and its Jet-elopment are inevit-able and important. But in every respect :f modern libraries are not equipped with contemporary devclij;!~i:c:\ulcornert of society. One c~i the resolving problems, like this, opening the door of the liI~-,\ulcornerr:~fa-c ilities, as one object, which located in every regional areas, u.9ng the existing facilities, the width of the library services mus: I)c opened. I-' ;- I n,> study is aimed at like the following: 1. is analysizing the situation ~vhich the library facilities of one ti:u~:sa!~d five hundred and fifty nine located here and there ir, Ii.;~-ui:gij~opkr ovince in Korea and s i s t ~t.l lousand seven hundred aid tliirl:~ six village libraries, for connecting as a library networks. 2. Tl\ulcornerc ivhole libraries in Kyungbook province and dividing into four ::arts as a Daegu, Phohang, Ahndong and Kimchun area as a transportation area, school area and resources area which exhibiting the view-point of helping-net~vorksl ike the following,

• Steel and Composite Structures
• /
• 제27권5호
• /
• pp.545-554
• /
• 2018

This study presents a novel method of improving the strength and stiffness of cold-formed steel (CFS) beams. Flexural members are primary members in most of the structures. Hence, there is an urgent need in the CFS industry to look beyond the conventional CFS beam sections and develop novel techniques to address the severe local buckling problems that exist in CFS flexural members. The primary objective of this study was to develop new CFS composite beam sections with improved structural performance and economy. This paper presents an experimental study conducted on different CFS composite beams with simply supported end conditions under four point loading. Material properties and geometric imperfections of the models were measured. The test strengths of the models are compared with the design strengths predicted by using Australian/New Zealand Standard for cold-formed steel structures. Furthermore, to ensure high precision testing, a special testing rig was also developed for testing of long span beams. The description of test models, testing rig features and test results are presented here. For better interpretation of results, a comparison of the test results with a hot rolled section is also presented. The test results have shown that the proposed CFS composite beams are promising both in terms of better structural performance as well as economy.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.46-46
• /
• 2002

It is well known that thin film growth and surface morphology can be substantially modified by ion-bombardment during the deposition. This is particularly important in case of thin-film deposition at low temperatures where the film growth occurs under highly nonequilibrium conditions. An attractive way to promote crystalline growth and surface morphology is deposition of additional energy in to the surface of the growing film by bombardment with hyperthermal particles. We were deposited crystalline Ti and TiN thin films on Si substrate by magnetron sputtering method with grid. Its thin films were highly smoothed and dense as increasing grid bias. In order explore the benefits of a bombardment of the growing film with high energetic particles. Ti and TiN films were deposited on Si substrates by an unbalanced magnetron sputter source with attached grid assembly for energetic ion extraction. Also, we have studied the variation of the plasma states by Langmuir probe and Optical Emission Spectroscopy (OES). The epitaxial orientation. microstructual characteristics. electrical and surface properties of the films were analyzed by XRD. SEM. Four point probe and AFM.

• 한국재료학회지
• /
• 제24권4호
• /
• pp.186-193
• /
• 2014

A thin Cu seed layer for electroplating has been employed for decades in the miniaturization and integration of printed circuit board (PCB), however many problems are still caused by the thin Cu seed layer, e.g., open circuit faults in PCB, dimple defects, low conductivity, and etc. Here, we studied the effect of heat treatment of the thin Cu seed layer on the deposition rate of electroplated Cu. We investigated the heat-treatment effect on the crystallite size, morphology, electrical properties, and electrodeposition thickness by X-ray diffraction (XRD), atomic force microscope (AFM), four point probe (FPP), and scanning electron microscope (SEM) measurements, respectively. The results showed that post heat treatment of the thin Cu seed layer could improve surface roughness as well as electrical conductivity. Moreover, the deposition rate of electroplated Cu was improved about 148% by heat treatment of the Cu seed layer, indicating that the enhanced electrical conductivity and surface roughness accelerated the formation of Cu nuclei during electroplating. We also confirmed that the electrodeposition rate in the via filling process was also accelerated by heat-treating the Cu seed layer.

• 물과 미래
• /
• 제29권5호
• /
• pp.161-172
• /
• 1996

상용관 마찰계수 산정을 위해 개발된 기존의 Hazen-Williams 식, Colebrook-White 식과 유동훈(1995)이 제안한야 영점높이 평균법과 마찰계수 평균법의 산정식들을 비교 검토하였다. 간단한 관망에 대하여 관종류, 관경, 유속, 관길이를 변화시켜 수리조건을 구성하였으며, 네가지 상용관 마찰계수 산정식을 적용하여 구한 압력차이를 비교하여 각각의 산정식들이 가지는 특징을 논하였고, 입력자료의 변화에 따라 마찰손실이 어떠한 거동을 하는지 알아보았다. 관경을 소형관 및대형관으로 변화시켰을 때의 분석결과와 중형관일 때의 분석결과를 세 종류의 강관에 대하여 비교하였고, 유속 변화와 압력 변화와의 비교를 통하여 기존 상용관 마찰 계수 산정식의 문제점에 대하여 논하였다.

• 통상정보연구
• /
• 제11권1호
• /
• pp.3-25
• /
• 2009

These days international trade has been converting to e-Trade formation. At this point, Korea has been striving for the trade facilitation; reducing logistics cost and improving foreign competitiveness by computerization operations of the maritime transportation that logistics and customs clearance are involved. However, due to the substantial characteristic of logistics service, the necessity of flexible and various logistics service development using internet has been strongly suggested. In particular, the logistics service which could share documents related to international physical movement between shippers and logistics organization. In this regard, this study carried out interview to explore the problems of physical distribution service and to suggest development direction of e-logistics service. The reason why this survey carried out is that most of users want more effective e-logistic service that could diminish successively real expense decrease. After analysis of survey results, this paper presents the basic development direction and emphasis development subjects. Therefore, the basic direction is presented from four viewpoints; customer-oriented approach, service-oriented approach, total approach and step-by-step implementation. Furthermore six development subjects; web-based standard module development for small and medium forwarders, development of standard logistics ERP system, collaboration model between KTNET and KLNET, system improvement for real users, on-demand system building for SMEs and connection with legacy system have been required.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.288-291
• /
• 2002

Application of metal silicides such as TiSi$_2$ and CoSi$_2$ as contacts and gate electrodes are being studied. However, TiSi$_2$ due to the linewidth-dependance, and CoSi$_2$ due to the excessive Si consumption during silicidation cannot be applied to the deep-submicron MOSFET device. NiSi shows no such problems and can be formed at the low temperature. But, NiSi shows thermal instability. In this investigation, NiSi was formed with a Ti-capping layer to improve the thermal stability. Ni and Ti films were deposited by the thermal evaporator. The samples were then annealed in the N$_2$ ambient at 300-800$^{\circ}C$ in a RTA (rapid thermal annealing) system. Four point probe, FESEM, and AES were used to study the thermal properties of Ti-capped NiSi layers. The Ti-capped NiSi was stable up to 700$^{\circ}C$ for 100 sec. RTA, while the uncapped NiSi layers showed high sheet resistance after 600$^{\circ}C$. The AES results revealed that the Ni diffusion further into the Si substrate was retarded by the capping layer, resulting in the suppression of agglomeration of NiSi films.

• Journal of Electrochemical Science and Technology
• /
• 제9권3호
• /
• pp.212-219
• /
• 2018

Perovskite type ceramic membranes which exhibit dual ion conduction (proton and oxygen ion conduction) can permeate water and can aid solving operational problems such as temperature gradient and carbon deposition associated with a working solid oxide fuel cell. From this point of view, it is crucial to reveal water transport mechanism and especially the nature of the surface sites that is necessary for water incorporation and evolution. $BaCe_{0.8}Y_{0.2}O_{3-{\alpha}}$ (BCY20) was used as a model proton and oxygen ion conducting membrane in this work. Four different catalytically modified membrane configurations were used for the investigations and water flux was measured as a function of temperature. In addition, CO was introduced to the permeate side in order to test the stability of membrane against water and $CO/CO_2$ and post operation analysis of used membranes were carried out. The results revealed that water incorporation occurs on any exposed electrolyte surface. However, the magnitude of water permeation changes depending on which membrane surface is catalytically modified. The platinum increases the water flux on the feed side whilst it decreases the flux on the permeate side. Water flux measurements suggest that platinum can block water permeation on the permeate side by reducing the access to the lattice oxygen in the surface layer.