• 제목/요약/키워드: fortify

검색결과 74건 처리시간 0.02초

칫솔질에 의한 레진 표면 강화재의 마모 (THE ABRASION OF SURFACE PENETRATING SEALANT BY TOOTH-BRUSHING)

  • 송주현;한세현;장기택;이상훈
    • 대한소아치과학회지
    • /
    • 제33권4호
    • /
    • pp.633-642
    • /
    • 2006
  • 본 연구는 레진 표면을 연마한 후 레진 표면 강화재를 도포한 것이 표면 처리하지 않은 군에 비해 칫솔질 마모시 표면 특성 즉, 표면 조도, 표면 자유 에너지, 마모율 등의 변화가 있는지 알아 보기 위해 시행하여 다음과 같은 결과를 얻었다(p=0.05). 1. 평균 조도는 Biscover < Forify < Polishing군 순이었다. 마모 전과 6개월에서는 모든 군에서 유의한 차이를 보였고, 1개월, 2개월, 3개월에서는 Polishing군과 Fortify군, Polishing군과 Biscover군에서 유의한 차이를 보였다. 2. 표면 자유 에너지는 마모 전은 Polishing군과 Biscover군, Fortify군과 Biscover군에서 유의한 차이를 보였고(Biscover < Fortify < Polishing), 1개월에서는 Polishing군과 Fortify군에서 유의한 차이를 보였으며, 2개월에서는 각 군간 유의한 차이를 보이지 않았다. 3개월에서는 Fortify군과 Biscover군에서 유의차를 보였고, 6개월에서는 Polishing군과 Fortify군, Fortify군과 Biscover군에서 유의한 차이를 보였다 (Fortify < Polishing < Biscover). 3. 마모율은 1개월에서 모든 군에서 유의차를 보였으며, 2개월에서는 군 간 유의차가 없었고, 3개월과 $4{\sim}6$개월 평균 마모율은 Polishing군과 Biscover군, Fortify군과 Biscover군에서 유의한 차이를 보였다. Fortify와 Biscover의 두께를 고려했을 때, Fortify는 2개월 내에, Biscover는 6개월 정도에 거의 소실되었다.

  • PDF

석곡 이규준의 부양이론에 관한 연구 (Study on Suk Gock's Fortify Yang Theory)

  • 황원덕
    • 동의생리병리학회지
    • /
    • 제18권3호
    • /
    • pp.713-723
    • /
    • 2004
  • With regard of YinYang and Five Elements Theory, predominance of Yin or Yang is a key point to discuss Nourishin Ying or Reinforcing Yang. There are two major branches about studying predominance of Yin or Yang. Zhu Danxi advocated the theory that Yang was always in excess while Yin was often deficient, and thus belonged to the School for Nourishing the Yin. Zhang Jie-bin advocated that Yang is easily deficient while Yin is easily sufficient. It seems that they studied Wang Bing's 'Ministerial fire rule on all thing instead of Imperial Fire' and right Kidney Mingmen theory in Nan Jing, which are both related to the First Yang in the Book of Changes and say Mingmen fire is the host of the body. Zhu Danxi insisted that Mingmen fire was easily in excess and likely to become pathogenic fire while Water phase was easily in deficiency, so the doctors should nourish Yin and suppress Yang. Zhang Jie-bin said that Mingmen fire is vulnerable so the doctors should fortify yang and reinforce Mingmen fire. Suk Gock Master Lee thought that the Book of Changes and Nei Jing had a viewpoint of Fortify Yang as regards of some distinguished Physicians' articles about predominance of YinYang. The author's going to discribe Suk Gock's Fortify Yang Theory with viewpoints of Nei Jing and the Book of Changes.

복합레진 수복물의 미세누출 감소를 위한 레진 전색제의 효과 (EFFECT OF RESIN SEALANTS ON THE REDUCTION OF MICROLEAKAGE IN COMPOSITE RESTORATIONS)

  • 조영곤;김문홍;이명구
    • Restorative Dentistry and Endodontics
    • /
    • 제31권4호
    • /
    • pp.282-289
    • /
    • 2006
  • 본 연구의 목적은 5급 복합레진 수복물에 각종 레진 전색제를 적용한 후, 수복물의 교합면측과 치은측 변연 미세누출에 대한 레진 전색제의 감소효과를 평가하기 위하여 시행하였다. 40개의 발거된 대구치의 협면 치경부에 5급 와동을 형성하고 복합레진을 충전한 후, 사용된 레진 전색제에 따라 다음 과 같이 4개의 군으로 분류하였다; 복합레진 표면과 변연부에 레진 전색제를 적용하지 않은 대조군, 복합레진 표면과 변연부에 각각 레진 전색제를 적용한 Fortify Plus 군, BisCover 군 및 PermaSeal 군으로 분류하였다. 각 군의 시편을 실온의 증류수에 24시간 동안 보관한 후, $5^{\circ}C$$55^{\circ}C$에서 1,000회의 열 순환을 시행하고 2% methylene blue 용액에 4시간동안 침적시켰다. 각 치아는 저속의 diamond disk 를 이용하여 각 수복물의 중앙부를 따라 협, 설 방향으로 양분 하고 20배율의 광학 입체현미경 하에서 각각 교합면측과 치은측 변연 미세누출을 평가하였다. 각 군의 교합면측과 치은측 변연 미세누출에 대한 유의성을 검정을 시행하여 다음과 같은 결과를 얻었다. 1. 교합면측 변연 미세누출은 사용된 레진 전색제 간에 통계학적으로 유의한 차이를 나타내지 않았다. 2. 치은측 변연 미세누출은 대조군과 Fortify Plus 군이 PermaSeal 군보다 통계학적으로 높게 나타났으며, 또한 Fortify Plus 군은 Biscover 군보다 통계학적으로 높은 변연 미세누출을 나타내었다 (p < 0.05). 3. 대조군과 Fortify Plus 군은 교합면측 보다 치은측 변연에서 통계학적으로 더 높은 미세누출을 나타내었다 (p < 0.05). 4. BisCover 군과 PermaSeal 군은 교합면측과 치은측의 변연 미세누출 간에 통계학적으로 유의한 차이를 나타내지 않았다. 본 연구를 종합하면, 5급 복합레진 수복물의 교합면측 변연 미세누출에 대한 레진 전색제의 감소효과는 크게 나타나지 않았지만, 치은측 변연 미세누출에 대한 레진 전색제의 감소효과는 사용된 레진 전색제에 따라 서로 다르게 나타났다.

Surface penetrating sealant가 치경부 수복물의 미세누출에 미치는 영향 (EFFECT OF SURFACE PENETRATING SEALANT ON THE MICROLEAKAGE OF CERVICAL RESTORATIONS)

  • 김성원;조용범;홍찬의
    • Restorative Dentistry and Endodontics
    • /
    • 제26권1호
    • /
    • pp.64-76
    • /
    • 2001
  • Despite the improvements in bond strengths of dentin adhesives and resin-modified glass ionomers, the marginal seal of cervical restorations remains a concern. Microleakage at poorly sealed margins can result in staining, post-operative sensitivity, pulpal irritation, and recurrent caries. The objective of this study was to evaluate the effect of surface penetrating sealant(SPS) on the microleakage of cervical restorations. 45 extracted human teeth were selected, and Class V preparations were prepared on the both buccal and lingual surface of the teeth to the following dimensions : 1.5mm axially, 3mm mesiodistally, and 3mm incisogingivally. After cervical restoration with composite resin, compomer, glass ionomer each restoration was treated as three methods: No Tx., Scotchbond Multipurpose Adhesive$^{\circledR}$, Fortify$^{\circledR}$. The sections were examined with a stereomicroscope to determine the extent of microleakage at enamel and dentin margins. The results of this study were as follows. 1. All groups showed some microleakage. 2. Gingival cavity wall with cementum margin showed significantly higher leakage value than occlusal cavity wall with enamel margin. 3. The group treated with SPS showed significantly lower leakage value than no treated group(p<0.05). But there is no difference between Fortify$^{\circledR}$ and Scotchbond Multipurpose adhesive$^{\circledR}$. The results of this study suggest that SPS are effective in reducing microleakage of class V restorations. But it is certain that some microleakage still occurred despite the application of SPS.

  • PDF

Korean Multinational Corporations' Global Expansion Strategies in Manufacturing Sector: Mother Factory Approach

  • Yong Ho Shin
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제16권1호
    • /
    • pp.269-279
    • /
    • 2024
  • The study explores the evolving landscape of overseas expansion strategies by Korean corporations, focusing on recent geopolitical tensions, the COVID-19 pandemic, and disruptions in global supply chains. It emphasizes the challenges faced by industries producing high-value products and delves into the concept of "Friend-Shoring" policies in the United States, leading major Korean companies to invest in local semiconductor, battery, and automotive factories. Recognizing the potential fragmentation of Korea's manufacturing sector, the paper introduces the "Mother Factory" strategy as a policy initiative, inspired by Japan's model, to establish core production facilities domestically. The discussion unfolds by examining the cases of major companies in Japan and the United States, highlighting the need for Korea to adopt a mother factory strategy to mitigate risks associated with friend-shoring policies. Inspired by Intel's "Copy Exactly" approach, the paper proposes a Korean mother factory model integrating smart factory technology and digital twin systems. This strategic shift aims to enhance responsiveness to geopolitical challenges and fortify the competitiveness of Korean high-tech industries. Finally, the paper proposes a Korean Mother Factory based on smart factory concepts. The suggested model integrates smart factory technology and digital twin frameworks to enhance responsiveness and fortify competitiveness. In conclusion, the paper advocates for the adoption of a comprehensive Korean Mother Factory model to address contemporary challenges, foster advanced manufacturing, and ensure the sustainability and competitiveness of Korean high-tech industries in the global landscape. The proposed strategy aligns with the evolving dynamics of the manufacturing sector and emphasizes technological advancements, collaboration, and strategic realignment.

복합레진으로 수복한 5급 와동의 미세누출에 대한 3종의 레진 표면 전색제의 효과 (The Effect of Three Surface Sealants on Microleakage of Class V Composite Resin Restorations)

  • 이원철;류재준
    • 대한치과보철학회지
    • /
    • 제47권2호
    • /
    • pp.182-190
    • /
    • 2009
  • 연구목적: 본 연구의 목적은 복합 레진(Z250)으로 수복한 5급 와동에서 변연부 미세누출에 대한 3종의 레진 표면 전색제(Fortify, Permaseal, Biscover LV)의 효과를 평가하는 것이다. 연구 재료 및 방법: 3개월 이내에 발거된 건전한 40개의 소구치와 대구치에 백악-법랑 경계를 중심으로 교합측 변연은 법랑질에, 치은측 변연은 백악질에 위치하도록 5급 와동을 협면과 설면에 각각 형성하였다. Clearfil SE bond와 복합 레진으로 충전한 치아를 무작위로 4개의 군으로 분류한 후 대조군을 제외한 실험군은 각각 20개의 와동에 레진 표면 전색제 3가지 제품을 각각 적용하고 24시간동안 생리식염수에 보관하였다. 보관한 시편을 열순환시킨 후 24시간 동안 2% methylene blue 염색 용액에 담가 두었다가 투명 레진에 매몰하였다. 매몰한 시편을 협설면의 충전물 중앙을 지나도록 절단한 후 현미경을 사용하여 교합면측과 치은측 변연부의 염색 용액의 침투도를 관찰함으로써 미세누출 여부와 정도를 분석하였다. 결과: 복합레진으로만 수복한 대조군은 실험군에 비해 교합면측과 치은측에서 미세누출이 컸으며 통계적으로 유의한 차이가 있었다(P<0.05). 레진 표면 전색제를 적용한 실험군들 사이에는 교합면측과 치은측 모두 통계적으로 유의한 차이가 없었다(P>0.05). 각 군의 교합면측과 치은측의 변연 미세누출을 비교 시 통계적으로 유의한 차이가 없었다. Fortify는 대조군과 비교시 치은측에서는 통계적으로 유의한 미세누출 감소 효과가 없었다. 결론: 복합레진으로 충전한 5급 와동 변연에 레진 표면 전색제를 적용한 경우 교합면측과 치은측 변연에서 미세누출 감소 효과가 있었다. 그러나 치은측 변연은 레진 표면 전색제의 적용 후에도 미세누출을 보이므로 각별히 주의를 요해야 할 것으로 사료된다.

Low-viscosity Resin Sysem이 복합레진 수복물의 변연누출에 미치는 영향 (THE EFFECT OF LOW-VISCOSITY RESIN SYSTEMS OM MARGINAL LEAKAGE OF COMPOSITE RESIN RESTORATIONS)

  • 양정숙;김문현;허선;김재곤;백병주
    • 대한소아치과학회지
    • /
    • 제24권2호
    • /
    • pp.460-474
    • /
    • 1997
  • The purpose of this study was to evaluate and compare the effectiveness of various low-viscosity resin systems used as rebonding agents to prevent microleakage at the margins of class I composite resin restorations. Seventy sound human premolars were selected for experiment. Class I cavities were prepared and each cavity was conditioned with a 37% phosphoric acid for 15 sec, rinsed with water for 15 sec, and dried with compressed air. Bonding agent(Scotchbond Multipurpose, 3M Co.) was applied and a hybrid composite resin (Z-100, 3M Co.) was placed using an incremental technic. The excess cured composite resin was carefully removed with Sof-Lex discs(3M Co.) to expose the original margins of the cavity. The following seven groups were established : group 1 was not rebonded and used as control group ; group 2 was rebonded with a Scotchbond Multipurpose(3M Co.) and finished ; group 3 was rebonded with a Fortify(BISCO) and finished ; group 4 was rebonded with a Concise white sealant(3M Co.) and finished ; group 5 was rebonded with a Concise white sealant(3M Co.) and not finished ; group 6 was rebonded with a P&F sealant(BISCO) and finished; group 7 was rebonded with a P&F sealant(BISCO) and not finished. The specimens were then subjected to 500 thermocycles between 5 & 65 with a 10 see dwell time and immersed in 2% methylene blue dye solution for 24 hours and sectioned with low-speed diamond cutter into two part under water condition. The extent of microleakage at rebonded margins was evaluated microscopically and scored for dye penetration according to the following scale : 0=no dye penetration ; 1=dye penetration to half-way along axial wall between enamel surface and DEJ ; 2=dye penetration beyond halfway along axial wall between enamel surface and DEJ ; 3=dye penetration to the full depth of DEJ or beyond DEJ. Selected samples were prepared for SEM observation to determine the depth of penetration of the rebonding agent into the marginal interface. The obtained results were as follows: 1. In the group 2 and 3, which is rebonded with a Scotchbond Multipupose and Fortify, dye penetration score were decreased significantly than that of group 1 (P<0.05), but group 4 and 6 were not statistically different from group 1(P>0.05). 2. There were significant differences between group 4, 6 and group 5, 7 when compared by dye penetration score (P<0.05). 3. In the SEM observation, Scotchbond Multipurpose and Fortify were penetrated within $30-40{\mu}m$ depth of the outermost surface. However, both sealants were failed to penetrate into the debonded interface.

  • PDF

Microencapsulated Ascorbic Acid for Milk Fortification

  • Lee, J.B.;Ahn, J.;Kwak, H.S.
    • Archives of Pharmacal Research
    • /
    • 제26권7호
    • /
    • pp.575-580
    • /
    • 2003
  • The present study was designed to develop a microencapsulated L-ascorbic acid and iron that could be used to fortify milk and to determine the sensory properties of milk fortified with microencapuslation. Coating material was medium-chain triacylglycerol (MCT), and selected core material was ferric ammonium sulfate and L-ascorbic acid. The highest efficiency of microencapsulation was 95.0% in the ratio of 15:1 as coating to core material. Ascorbic acid release was increased sharply up to 5 d storage as 6.5%. TBA value was the lowest when both capsulated iron and ascorbic acid were added during 12 d storage, compared with other treatments. In sensory analysis, most aspects were not significantly different between control and capsulated ascorbic acid fortified milk at 5 d storage. The present study indicated that the use of microencapsulated ascorbic acid with MCT is effective for fortifying milk. In addition, these results suggest that acceptable milk products can be prepared with microencapsulated ascorbic acid and iron.

산업지원기관의 산업체 정보봉사 (Information services to industry by industrial su n.0, pporting organizations)

  • 김용근
    • 한국도서관정보학회지
    • /
    • 제21권
    • /
    • pp.117-138
    • /
    • 1994
  • This study attempts to provide the foundation for a possibility that industrial su n.0, pporting organization can be strong information centers if they fortify their information dissemination activities, along with the basic functions. The following conclusions are resulted from the analysis in the operations of libraries, service methods and their publications of the information activities provided by the industrial su n.0, pporting organizations. First, the organizations have not be acquiring enough information materials. The services for bibliographic information should guarantee the uses of original documents. Second, the number of organizations providing on-line information services has been increasing, but the provided materials are nothing but their own materials produced during performing the basic functions. Third, the speedy information provision and efficient information dissemination for the end-users in the distance may be possible through on-line service, but it requires information analysis function to select the necessary information in our industrial environment. Forth, th information activities provided by the libraries of industrial su n.0, pporting organizations should be fortified.

  • PDF

산업분야 정보서비스에 있어서 정보분석의 문제 (Information analysis for industrial information service)

  • 김용근
    • 한국도서관정보학회지
    • /
    • 제25권
    • /
    • pp.501-527
    • /
    • 1996
  • This study attempts to provide the foundation that KINITI and industrial su n.0, pporting organizations can be strong information analysis centers if they fortify their information analysis activities. The following conclusions are resulted from the analysis in the state-of-the-art-report covered in national information flow system, service methods and their publications of the information analysis activities provided by the KINITI and industrial su n.0, pporting organizations. First, the KINITI and industrial su n.0, pporting organizations have not be acquiring enough information materials. The services for bibliographic information should guarantee the uses of original documents. Second, the number of organizations providing on-line information services has been increasing, but the provided materials are not sufficiently suited for user's requests. Third, the speedy information provision and efficient information dissemination for the end users in the long distance may be possible through on-line service, but it requires information analysis procedure to select the necessary information in our industrial environment. Forth, the information activities provided by the libraries of industrial su n.0, pporting organizations should be fortified.

  • PDF