• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.633-642
• /
• 2006

This study evaluated the surface changes such as surface average roughness(RA), surface free energy(SFE) and wear depth among groups treated with surface penetrating sealant(Fortify, Biscover), non treated polishing group before and after tooth-brushing, analyzing the influence of the sealants in filling of surface microdefects formed during the finishing and polishing procedures of composite resin. Results were as follow(p= 0.05) : 1. Ra was increased Biscover. Fortify and Polishing group. Before abrasion and in 6 months, all groups were statistically significant. In 1 month, 2 months and 3 months no statistical difference was noticed between Fortify and Biscover 2. SFE of Polishig and Biscover group. Fortify and Biscover group were statistically significant before abrasion. SFE of Polishing and Fortify group was statistically significant in 1 month. No statistical difference was noticed among groups in 2 months. SFE of Fortify and Biscover group was statistically significant in 3 months. Polishing and Fortify group, Fortify and Biscover group were statistically significant in 6 months. 3, Wear rate between Polishing and Fortify group was statistically significant in only 1 month. Wear rate between Polishing and Biscover group was statistically different in each month except for 2 month and so it was between Fortify and Biscover group. Considering film thickness of Fortify and Biscover, Fortify almost discappeared after 2 months and Biscover did after 6 months.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.3
• /
• pp.713-723
• /
• 2004

With regard of YinYang and Five Elements Theory, predominance of Yin or Yang is a key point to discuss Nourishin Ying or Reinforcing Yang. There are two major branches about studying predominance of Yin or Yang. Zhu Danxi advocated the theory that Yang was always in excess while Yin was often deficient, and thus belonged to the School for Nourishing the Yin. Zhang Jie-bin advocated that Yang is easily deficient while Yin is easily sufficient. It seems that they studied Wang Bing's 'Ministerial fire rule on all thing instead of Imperial Fire' and right Kidney Mingmen theory in Nan Jing, which are both related to the First Yang in the Book of Changes and say Mingmen fire is the host of the body. Zhu Danxi insisted that Mingmen fire was easily in excess and likely to become pathogenic fire while Water phase was easily in deficiency, so the doctors should nourish Yin and suppress Yang. Zhang Jie-bin said that Mingmen fire is vulnerable so the doctors should fortify yang and reinforce Mingmen fire. Suk Gock Master Lee thought that the Book of Changes and Nei Jing had a viewpoint of Fortify Yang as regards of some distinguished Physicians' articles about predominance of YinYang. The author's going to discribe Suk Gock's Fortify Yang Theory with viewpoints of Nei Jing and the Book of Changes.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.282-289
• /
• 2006

The purpose of this study was to compare the ability of three resin surface sealants to prevent microleakage in Class V composite resin restorations. Forty Class V cavities with the occlusal margin in enamel and gingival margin in dentin were prepared on the buccal surfaces of sound extracted molars, and restored with composite resin. Restorations were randomly assigned into one of four equal groups (n = 10): a control group, without resin sealing, and three experimental groups in which margins were sealed with Fortify Plus, Biscover and Permaseal, respectively. Specimens were thermocycled, immersed in a 2% methylene blue solution for 4 hours, sectioned longitudinally, and observed the leakage at the occlusal and gingival margins. The result was analyzed using Kruskal-Wallis test, Mann-Whitney test and Wilcoxon signed rank test. In conclusion, the ability to reduce microleakage at occlusal margins was similar in all of three sealants. However at gingival margin, it depended on the type of used resin surface sealant. At gingival margin. control and Fortify Plus group showed statistically higher microleakage than PermaSeal group. and Fortify Plus group also showed higher microleakage than BisCover group (p < 0.05).

• Restorative Dentistry and Endodontics
• /
• v.26 no.1
• /
• pp.64-76
• /
• 2001

Despite the improvements in bond strengths of dentin adhesives and resin-modified glass ionomers, the marginal seal of cervical restorations remains a concern. Microleakage at poorly sealed margins can result in staining, post-operative sensitivity, pulpal irritation, and recurrent caries. The objective of this study was to evaluate the effect of surface penetrating sealant(SPS) on the microleakage of cervical restorations. 45 extracted human teeth were selected, and Class V preparations were prepared on the both buccal and lingual surface of the teeth to the following dimensions : 1.5mm axially, 3mm mesiodistally, and 3mm incisogingivally. After cervical restoration with composite resin, compomer, glass ionomer each restoration was treated as three methods: No Tx., Scotchbond Multipurpose Adhesive$^{\circledR}$, Fortify$^{\circledR}$. The sections were examined with a stereomicroscope to determine the extent of microleakage at enamel and dentin margins. The results of this study were as follows. 1. All groups showed some microleakage. 2. Gingival cavity wall with cementum margin showed significantly higher leakage value than occlusal cavity wall with enamel margin. 3. The group treated with SPS showed significantly lower leakage value than no treated group(p<0.05). But there is no difference between Fortify$^{\circledR}$ and Scotchbond Multipurpose adhesive$^{\circledR}$. The results of this study suggest that SPS are effective in reducing microleakage of class V restorations. But it is certain that some microleakage still occurred despite the application of SPS.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.269-279
• /
• 2024

The study explores the evolving landscape of overseas expansion strategies by Korean corporations, focusing on recent geopolitical tensions, the COVID-19 pandemic, and disruptions in global supply chains. It emphasizes the challenges faced by industries producing high-value products and delves into the concept of "Friend-Shoring" policies in the United States, leading major Korean companies to invest in local semiconductor, battery, and automotive factories. Recognizing the potential fragmentation of Korea's manufacturing sector, the paper introduces the "Mother Factory" strategy as a policy initiative, inspired by Japan's model, to establish core production facilities domestically. The discussion unfolds by examining the cases of major companies in Japan and the United States, highlighting the need for Korea to adopt a mother factory strategy to mitigate risks associated with friend-shoring policies. Inspired by Intel's "Copy Exactly" approach, the paper proposes a Korean mother factory model integrating smart factory technology and digital twin systems. This strategic shift aims to enhance responsiveness to geopolitical challenges and fortify the competitiveness of Korean high-tech industries. Finally, the paper proposes a Korean Mother Factory based on smart factory concepts. The suggested model integrates smart factory technology and digital twin frameworks to enhance responsiveness and fortify competitiveness. In conclusion, the paper advocates for the adoption of a comprehensive Korean Mother Factory model to address contemporary challenges, foster advanced manufacturing, and ensure the sustainability and competitiveness of Korean high-tech industries in the global landscape. The proposed strategy aligns with the evolving dynamics of the manufacturing sector and emphasizes technological advancements, collaboration, and strategic realignment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.182-190
• /
• 2009

Statement of problem: Microleakage at the occlusal and gingival margin of Class V cavities restored with composite resin has traditionally been considered an obstacle to successful restoration. Purpose: The aim of this study was to assess the effectiveness of three different surface sealants(Fortify, Permaseal and Biscover LV) on the marginal sealing of Class V light-activated composite resin restorations(Z250). Material and methods: Forty noncarious human premolars and molars extracted within a three-month period were selected. Class V cavities with the occlusal margin in enamel and gingival margin in cementum were prepared in both buccal and lingual surfaces. The teeth, randomly assigned in four groups with twenty cavities in each group, were restored with composite resin after applying an adhesive system(Clearfil SE bond). After the finishing and polishing procedures, the restorations were covered with a specific surface sealants, except for the control samples, which were not sealed. After placing restorations, the specimens were thermocycled, and immersed in a 2% methylene blue solution for twenty four hours and sectioned longitudinally. The marginal microleakage was evaluated at the occlusal and gingival interfaces using a microscope and compared among the four groups using ANOVA test and Wilcoxon Rank-Sum test($\alpha$=0.05). Results: Statistical analysis showed that there was significantly less leakage when the surface sealants were used than there was in control group(P<.05). There were no significant differences of microleakage at occlusal and gingival margins among groups. There were no significant differences between microleakage of occlusal and gingival margins in each group. Fortify was not statistically different from control group at the gingival margin(P>.05). Conclusion: Application of surface sealants was an effective method of surface coating in reducing microleakage at occlusal and gingival margins of Class V composite resin restorations. However, it is certain that some microleakage still occurred despite the application of surface sealants, especially gingival margins.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.2
• /
• pp.460-474
• /
• 1997

The purpose of this study was to evaluate and compare the effectiveness of various low-viscosity resin systems used as rebonding agents to prevent microleakage at the margins of class I composite resin restorations. Seventy sound human premolars were selected for experiment. Class I cavities were prepared and each cavity was conditioned with a 37% phosphoric acid for 15 sec, rinsed with water for 15 sec, and dried with compressed air. Bonding agent(Scotchbond Multipurpose, 3M Co.) was applied and a hybrid composite resin (Z-100, 3M Co.) was placed using an incremental technic. The excess cured composite resin was carefully removed with Sof-Lex discs(3M Co.) to expose the original margins of the cavity. The following seven groups were established : group 1 was not rebonded and used as control group ; group 2 was rebonded with a Scotchbond Multipurpose(3M Co.) and finished ; group 3 was rebonded with a Fortify(BISCO) and finished ; group 4 was rebonded with a Concise white sealant(3M Co.) and finished ; group 5 was rebonded with a Concise white sealant(3M Co.) and not finished ; group 6 was rebonded with a P&F sealant(BISCO) and finished; group 7 was rebonded with a P&F sealant(BISCO) and not finished. The specimens were then subjected to 500 thermocycles between 5 & 65 with a 10 see dwell time and immersed in 2% methylene blue dye solution for 24 hours and sectioned with low-speed diamond cutter into two part under water condition. The extent of microleakage at rebonded margins was evaluated microscopically and scored for dye penetration according to the following scale : 0=no dye penetration ; 1=dye penetration to half-way along axial wall between enamel surface and DEJ ; 2=dye penetration beyond halfway along axial wall between enamel surface and DEJ ; 3=dye penetration to the full depth of DEJ or beyond DEJ. Selected samples were prepared for SEM observation to determine the depth of penetration of the rebonding agent into the marginal interface. The obtained results were as follows: 1. In the group 2 and 3, which is rebonded with a Scotchbond Multipupose and Fortify, dye penetration score were decreased significantly than that of group 1 (P<0.05), but group 4 and 6 were not statistically different from group 1(P>0.05). 2. There were significant differences between group 4, 6 and group 5, 7 when compared by dye penetration score (P<0.05). 3. In the SEM observation, Scotchbond Multipurpose and Fortify were penetrated within $30-40{\mu}m$ depth of the outermost surface. However, both sealants were failed to penetrate into the debonded interface.

• Archives of Pharmacal Research
• /
• v.26 no.7
• /
• pp.575-580
• /
• 2003

The present study was designed to develop a microencapsulated L-ascorbic acid and iron that could be used to fortify milk and to determine the sensory properties of milk fortified with microencapuslation. Coating material was medium-chain triacylglycerol (MCT), and selected core material was ferric ammonium sulfate and L-ascorbic acid. The highest efficiency of microencapsulation was 95.0% in the ratio of 15:1 as coating to core material. Ascorbic acid release was increased sharply up to 5 d storage as 6.5%. TBA value was the lowest when both capsulated iron and ascorbic acid were added during 12 d storage, compared with other treatments. In sensory analysis, most aspects were not significantly different between control and capsulated ascorbic acid fortified milk at 5 d storage. The present study indicated that the use of microencapsulated ascorbic acid with MCT is effective for fortifying milk. In addition, these results suggest that acceptable milk products can be prepared with microencapsulated ascorbic acid and iron.

• Journal of Korean Library and Information Science Society
• /
• v.21
• /
• pp.117-138
• /
• 1994

This study attempts to provide the foundation for a possibility that industrial su n.0, pporting organization can be strong information centers if they fortify their information dissemination activities, along with the basic functions. The following conclusions are resulted from the analysis in the operations of libraries, service methods and their publications of the information activities provided by the industrial su n.0, pporting organizations. First, the organizations have not be acquiring enough information materials. The services for bibliographic information should guarantee the uses of original documents. Second, the number of organizations providing on-line information services has been increasing, but the provided materials are nothing but their own materials produced during performing the basic functions. Third, the speedy information provision and efficient information dissemination for the end-users in the distance may be possible through on-line service, but it requires information analysis function to select the necessary information in our industrial environment. Forth, th information activities provided by the libraries of industrial su n.0, pporting organizations should be fortified.

• Journal of Korean Library and Information Science Society
• /
• v.25
• /
• pp.501-527
• /
• 1996

This study attempts to provide the foundation that KINITI and industrial su n.0, pporting organizations can be strong information analysis centers if they fortify their information analysis activities. The following conclusions are resulted from the analysis in the state-of-the-art-report covered in national information flow system, service methods and their publications of the information analysis activities provided by the KINITI and industrial su n.0, pporting organizations. First, the KINITI and industrial su n.0, pporting organizations have not be acquiring enough information materials. The services for bibliographic information should guarantee the uses of original documents. Second, the number of organizations providing on-line information services has been increasing, but the provided materials are not sufficiently suited for user's requests. Third, the speedy information provision and efficient information dissemination for the end users in the long distance may be possible through on-line service, but it requires information analysis procedure to select the necessary information in our industrial environment. Forth, the information activities provided by the libraries of industrial su n.0, pporting organizations should be fortified.