• Journal of Korean Library and Information Science Society
• /
• v.26
• /
• pp.365-400
• /
• 1997

The interface design for most present query-base model of OPAC systems does not include the function to implement an iterative feedback process till the user arrives at satisfied search results through the interaction with the system. Also, the interface doesn't provide the help function for a user to select pertinent search terms. To formulate a query at the present OPAC system, a user should learn a set of syntax different from system to system. All of above mentioned things make an end-user feel difficult to utilize an OPAC system effectively. This experimental system is attempted to alleviate a few limitations of the present OPAC system by a n.0, pplying the direct-manipulation technique as well as the feedback principle. First, this system makes it unnecessary for a user to learn some syntax for query formulation by providing option buttons for access points. Second, this system makes it possible for a user to decide whether each displayed record is relevant or not, and for keywords included in the relevant records to be automatically stored in order to be used for later feedback. Third, in this system, the keywords stored in [sayongja yongeu bogyanham] can be deleted if unnecessary or can selected as search terms for a query expansion as well as a query modification. Fourth, in this system, after inputting the original query, the feedback process can be proceed without coming back to the previous search step until a user becomes satisfied with the search results. In conclusion, the searching behaviors of heterogeneous users should be continuously observed, analysed, and studied, the findings of which should be integrated into the design for the interface of the OPAC system.

• Steel and Composite Structures
• /
• v.27 no.3
• /
• pp.337-353
• /
• 2018

In previous weak-axis moment connection tests, brittle fracture always initiated near the edge of the beam flange groove weld due to force flow towards the stiffer column flanges, which is the opposite pattern as strong-axis moment connections. As part of the China NSFC (51278061) study, this paper tested two full-scale novel weak-axis reduced beam section moment connections, including one exterior frame connection specimen SJ-1 under beam end monotonic loading and one interior frame joint specimen SJ-2 under column top cyclic loading. Test results showed that these two specimens were able to satisfy the demands of FEMA-267 (1995) or ANSI/AISC 341-10 (2010) without experiencing brittle fracture. A parametric analysis using the finite element software ABAQUS was carried out to better understand the cyclic performance of the novel weak-axis reduced beam section moment connections, and the influence of the distance between skin plate and reduced beam section, a, the length of the reduced beam section, b, and the cutting depth of the reduced beam section, c, on the cyclic performance was analyzed. It was found that increasing three parametric values reasonably is beneficial to forming beam plastic hinges, and increasing the parameter a is conducive to reducing stress concentration of beam flange groove welds while increasing the parameters b and c can only reduce the peak stress of beam flange groove welds. The rules recommended by FEMA350 (2000) are suitable for designing the proposed weak-axis RBS moment connection, and a proven calculation formulation is given to determine the thickness of skin plate, the key components in the proposed weak-axis connections. Based on the experimental and numerical results, a design procedure for the proposed weak-axis RBS moment connections was developed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.2
• /
• pp.137-144
• /
• 1983

Core walls for tall building is one of the structures to support lateral load. Since most structural elements used for resisting which ate relatively weak against torsion, it is important to investigate tosional effects in the analysis and design of tall buildings. Rutenberg proposed a more refined theory on the torsional analysis of core walls which can be used when the stiffness of lintel beams are small or large. In this paper a more refined method to analysis the torsion of core wall structures with variable cross sections and being subjected to arbitrarilly distributed load was suggested. To reduce complex and a great number of calculations and to enhance the generality and flexibility of application of this method, the discrete method using transfer matrix formulation was used. Then this method can be easily applied to irregular and variational sections, has no necessity to get particular solution for each of loading conditions, and the maximum size of matrix calculated is $4{\times}4$, which makes this approach more appropriate for design office calculations using comuters of any sizes or even desk calculators.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.4
• /
• pp.473-478
• /
• 2004

Processing and storage of the silage from agricultural by-products were studied in two experiments. The first experiment was conducted to investigate the chemical composition and degradability of various silages with varying ensiling times. The experiment was a 5$\times$3 factorial design, completely randomized, with factor A as the different formulated mixtures by varying level of urea addition (0, 0.5, 1.0, 1.5 and 2.0%) and factor B as the time of ensiling. Chemical composition changed little with time and varied only slightly with levels of urea in the mixtures. Dry matter (DM) degradability increased with increasing cassava levels while crude protein degradability and pH level increased with increasing urea addition. By using 'Flieg point', which relates to organic acid yields, there were no significant difference among ensiled mixtures and times of ensiling. Therefore it can be concluded that the 5th silage formulation is the most appropriate since its DM and crude protein (CP) degradability were highest. The second experiment was carried out to determine the quality of the 5th silage mixtures (from the previous trial) after being stored for up to 6 months. The experiment was a complete randomized design with samples taken at monthly intervals up to 6 months and subjected to laboratory and degradability analyses. The results showed no significant (p>0.05) difference in chemical composition except for increased neutral detergent fiber and acid detergent fiber percentage in association with increasing storage time. There were no significant (p>0.05) differences in 'Flieg point' among times of storage. In conclusion, this experiment showed that the silage from agricultural by-products can be stored for more than 6 months.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1716-1729
• /
• 2010

In this paper, we deal with a hierarchical ring-mesh optical network design problem. The objective is to minimize the total cost of optical add-drop multiplexers (OADMs) handling intra-ring traffic, optical cross-connects (OXCs) handling inter-ring traffic, and cabling cost among OADMs and among OXCs, while satisfying intra-ring and inter-ring capacities. We develop an integer programming (IP) formulation for the problem and devise some cutting planes that partially break the symmetry of rings. Dealing with the inherent computational complexity of the problem, we devise an effective heuristic procedure that finds a good quality feasible solution within reasonable computing times. Computational results demonstrate the efficacy of the proposed solution procedure; the developed symmetry breaking inequalities significantly reduce the computing time to find an optimal solution for small size problems, and the heuristic procedure finds a better feasible solution than that CPLEX, a commercial optimization software, finds for large size problems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.183-192
• /
• 2004

New dynamic analysis procedures lot the vertically drilled sea water pile are suggested and demonstrated by the typical design Problem. Pile structure submerged in the sea water as well as forces by the ocean waves and tidal currents are modeled and formulated by finite element method. To obtain wave forces for the finite element equation, Airy's wave theory is tested and selected among others. Lateral lifting forces induced by the vortex shedding of current flow is simply based on the harmonic function with the Strouhal frequency and lifting coefficient. Natural frequencies and frequency responses for the pile are calculated by NASTRAN using the results of the formulation. Dynamic displacement and stress results obtained by these procedures are shown to be applicable to predict the dynamic behaviors of the ocean pile by the wave and lifting forces as a preliminary design analysis.

• Journal of the Korean Dietetic Association
• /
• v.19 no.1
• /
• pp.1-13
• /
• 2013

The purpose of this study was to determine the optimal mixing condition of tomato powder and sugar for producing chiffon cake. The experiment was designed according to the central composite design of response surface, which yielded ten experimental points, including two replicates. Physiochemical and sensory properties were measured, and theses values applied to mechanical models. A canonical form and perturbation plot showed the influence of each ingredient on the final product mixture. The results of the physiochemical analysis of each sample showed significant differences in sweetness (P<0.01), color L (P<0.001), color a (P<0.001), color b (P<0.05), hardness (P<0.05), and cohesiveness (P<0.01). The sensory measurements were significantly different in color (P<0.05), appearance (P<0.05), flavor (P<0.05), sweetness (P<0.01), moistness (P<0.05), and overall acceptability (P<0.05). The optimal formulation, calculated using the numerical and graphical method, was determined to be 59.27 g tomato powder and 285.66 g sugar. The sensory evaluation showed significantly higher preferences in the color, flavor, appearance, texture, sweetness, tenderness, moistness and overall quality of the optimized chiffon cake compared to the controlled chiffon cake. The optimized chiffon cake also showed a high antioxidative activity compared to the controlled chiffon cake. Our results show that chiffon cake prepared with tomato powder enhances sensory characteristics and antioxidative activity.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.64-74
• /
• 2002

A special purposed program for ship hull strength analysis considering whipping phenomena is developed. In this program, the non-linear hydrodynamic impact force is considered using the momentum slamming theory and the hull girder is modeled as elastic body on the base of Timoshenko's beam theory. The numerical verifications are conducted in the view points that the effect of slamming impact force, the effect of hydro-elastic formulation, and the effect of various design parameters such as ship speed, wave amplitude, wave length and others. By the application of a real ship design process, the availability of the program is proved. This program has a GUI function for many I/O data process as well as the function to show the 2-D ship motion in the graphic window, and has other available functions for the whipping analysis.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.1
• /
• pp.25-29
• /
• 1980

For the preliminary estimation of the vertical hull natural frequency, the Schlick's or Schlick-type formulae have been traditional ones and are still in common use today. Some investigators have made their efforts, based on statistical data of ships' system parameters, to extend the applicability of Schlick-type formulae to higher modes, or to utilize the Rayleigh method. For instance, the work done by Dinsenbacher et al.[5] belongs to the former and that of Nagamoto et al.[6] to the latter. In a part of his previous paper[7], the author, investigating the case of a cargo ship of medium size, suggested that provided statistically simplified curves such as trapezoid of system parameter distributions are available in hands, direct utlization of an ordinary computer program can be also an another convenient method by which we can obtain both natural frequencies and normal mode shapes. In this paper, to confirm the feasibility of the above suggestion, four high speed boats are investigated. The system parameters of them are originally given in [5]. The computer program used here is one confiled based on a calculation method derived from Myklestal-Prohl modeling of hull, transfer matrix formulation and an extended Gumbel's initial value method for solving frequency equation. The results of the investigation show that the direct calculation based on statistically oriented and reasonably assumed trapezoidal mean curves of system parameter distributions can give us natural frequencies within about 5% deviation up to several-noded modes and normal mode shapes serviceable at least up to 4- or 5-noded modes in comparision with those based on actual distributions of system parameters. For this simplified method the actual data required for input are only of ship length, displacement, total added mass, bending and shear rigidity at amidship. They are available at the early stage of design. By this method we can also easily trace variations of vibration characteristics in the course of ship design cycles.

• Korean Institute of Interior Design Journal
• /
• v.16 no.6
• /
• pp.250-257
• /
• 2007

Characteristics of color application indicated from Kirchsteigfeld is presented the various points of view to be preserved urban housing color. It had been handled as environmental color by view point of community and connectivity rather than color scheme of single housing. First, color to be consisted of basis for urban entirely as background color in urban housing complex has been indicated the bright and cheerful feelings and expressed to be introduced mostly from the single color system. Second, characteristics to be inhibited strongly from housing complex had been indicated by restricted four types of color, formulated the overall context and change through accent and the change from disposition of principal and the accessary of color scheme. In this case, it was not regular formulation, but as a whole category view, it could be provided by orderly regularity system strictly Particularly it had been applied as a whole for lightness change by single color, introduced the different color of building to be centered or remained by a visual point. This had been formed to introduction of color by stand points of housing group not introduction to color by sole concept of building. Third, emphasizing of morphologic feeling by using of difference of lightness, it could be indicated the mild and comfortable stereo-type sensibility from the overall types of housing, we could understand for formation of color code by lightness of slightly differences. Fourth, it had been taken the convenient adaptation method for maintenance of simple graphic system as a environmental color. It has considerable advantage for sustainability of color to indicate on finishing material, form and detail in architecture, as the sole separated color not to be complicated when to be painted over and again or managed continuously.