• Journal of the Korean Society of Earth Science Education
• /
• v.5 no.1
• /
• pp.60-67
• /
• 2012

The purpose of this study is to find out the effect of hypothesis formulations using abduction on science processing skills and the creative thinking activities. As the subject, 2 classes in the $6^{th}$ grade of B elementary school located in Busan were selected. Through the pre/post inspection design between experiment and comparison class, the units of science courses in the second semester of $6^{th}$ grade '1. A change in the weather' and '2. Various gases' were applied. The results were as follows: Firstly, the test on science processing skills showed that there was not statistic meaningful differences between the two groups. And, in the sub-parts, there was not statistic meaningful differences between the two groups. Secondly, it was observed that it would have a meaningful effect to improve the creative thinking activities of students who performed hypothesis formulation using abduction. Especially, through this, the experimental class gave a positive effect on the 'Fluency' and 'Elaboration', one of lower categories of the creative activities. The results of 'Flexibility' and 'Originality' in the experimental class were higher than those of students in the comparative class. However, according to statistical analysis, this result is meaningless. Thirdly, on the survey about the hypothesis formulation using abduction, many students thought that this learning method was very interesting and helpful to study science. In addition, it was observed that the ability to use abduct thinking was improved more than ever before.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.167-170
• /
• 2004

This paper proposes resource allocation method for achieving investment goals in manufacturing system. In order to align resource allocation and manufacturing system design, the system design decomposition (SDD) approach is used. In this paper, a mathematical formulation for resource allocation based on SDD approach is analyzed and a genetic algorithm application is discussed.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.1
• /
• pp.189-199
• /
• 1994

This paper considers the covering network design problem (CNDP). In the CNDP, an undirected graph is given where nodes correspond to potential facility sites and arcs to potential links connecting facilities. The objective of the CNDP is to identify the least cost connected subgraph whose nodes cover the given demand points. The problem difines a demand point to be covered if some node in the selected graph is present within an appropriate distance from the demand point. We present an integer programming formulation for the problem and develop a dual-based solution procedure. The computational results for randomly generated test problems are also shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.197-197
• /
• 2000

In this paper, we present a novel method for design of fuzzy Logic controllers by defining a set of characteristic parameters (CFLCS). These parameters are extracted and defined by examining the structure and characteristics of the individual components of FLCs and parameterizing those. Based upon this formulation, a series of simulations is conducted for plants having simple dynamics in order to see the performance of this proposed method. The simplicity and effectiveness of this method are discussed in detail.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.225-230
• /
• 2001

In this paper, a method for optimal design of PID controller using the immune algorithm(IA) has been proposed to improve the stability of A.C.-D.C. power system. The process of this study is composed of formulation of basic controls on HVDC transmission system, mathematical model preparation for stability analysis, and supplementary signal control by an optimal PID controller using the IA. The dynamic property was verified through computer simulations regarding transient stability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.163-168
• /
• 2011

Robust optimization or reliability-based design optimization are some of the methodologies that are employed to take into account the uncertainties of a system at the design stage. For applying such methodologies to solve industrial problems, accurate and efficient methods for estimating statistical moments and failure probability are required, and further, the results of sensitivity analysis, which is needed for searching direction during the optimization process, should also be accurate. The aim of this study is to employ the function approximation moment method into the sensitivity analysis formulation, which is expressed as an integral form, to verify the accuracy of the sensitivity results, and to solve a typical problem of reliability-based design optimization. These results are compared with those of other moment methods, and the feasibility of the function approximation moment method is verified. The sensitivity analysis formula with integral form is the efficient formulation for evaluating sensitivity because any additional function calculation is not needed provided the failure probability or statistical moments are calculated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.3
• /
• pp.277-283
• /
• 2008

Balance shaft module contributes to reduce the engine-born vibration by compensating it from a unbalance mass with opposite phase but practically, this device has some problems during the operation in a high speed owing to the considerable amount of unbalance mass that leads to the large quantity of bending deformation as well as torque fluctuation at the balance shaft. To tackle two main problems, the design strategy on balance shaft is suggested by addressing the optimal location of unbalance mass and supporting hearing based on the formulation of objective function that minimizes critical issues, both bending deformation as well as torque fluctuation. The boundary condition of balance shaft assumes to be free such that any external force or contact component is not taken into consideration in this study.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.671-680
• /
• 2020

This paper describes an improved beam analysis for compound rotorcraft fuselage design. The present beam approach is capable of analyzing fuselage composed of stiffeners using equivalent layer methodology. Thickness of the skin and laminated layer approach are suggested based on the unified beam formulation. The analysis which considers an equivalent stiffener layer is performed for a fuselage with stiffeners and preliminary study about the specification of stiffeners is conducted and compared by the results using the existing software.

• Earthquakes and Structures
• /
• v.18 no.2
• /
• pp.263-273
• /
• 2020

The use of energy concepts in seismic analysis and design of structures requires the understanding of the input energy response of multi-degree-of-freedom (MDOF) systems subjected to strong ground motions. For design purposes and non-time consuming analysis, however, it would be beneficial to associate the input energy response of MDOF systems with those of single-degree-of-freedom (SDOF) systems. In this paper, the theoretical formulation of energy input to MDOF systems is developed on the basis that only a particular portion of the total mass distributed among floor levels is effective in the nth-mode response. The input energy response histories of several reinforced concrete frames subjected to a set of eleven horizontal acceleration histories selected from actual recorded events and scaled in time domain are obtained. The contribution of the fundamental mode to the total input energy response of MDOF frames is demonstrated both graphically and numerically. The input energy of the fundamental mode is found to be a good indicator of the total energy input to two-dimensional regular MDOF structures. The numerical results computed by the proposed formulation are verified with relative input energy time histories directly computed from linear time history analysis. Finally, the elastic input energies are compared with those computed from time history analysis of nonlinear MDOF systems.

• Archives of Pharmacal Research
• /
• v.29 no.9
• /
• pp.795-799
• /
• 2006

Peptides, although high efficacy and specificity in their physiological function, usually have low therapeutical activities due to their poor bioavailability when administrated orally. Nanoparticles have been regarded as a useful vector for targeted drug delivery system because they can protect drug from being degraded quickly and pass the gastrointestinal barriers. Here we described a novel oral N-trimethyl chitosan nanoparticles formulation containing thymopentin (Tp5-TMC-NP). N-trimethyl chitosan (TMC) was synthesized and then used to prepare Tp5-TMC-NP by ionotropic gelation. A three-factor, five-level CCD (Central Composite Design) design was used in the optimization procedure, with HPLC as the analyzing method. The resulting Tp5-TMC-NP had a regular spherical surface and a narrow particle size range with a mean diameter of 110.6 nm. The average entrapment efficiency was 78.8%. The lyophilized Tp5-TMC-NP formulation was stable in $4^{\circ}C\;or\;-20^{\circ}C$ after storage of 3 months without obvious changes in morphology, particle size, pH and entrapment ratio. The results of the flow cytometer determination showed that the ratio of $CD4^+/CD8^+$ of Wistar female rat given Tp5-TMC-NP (ig) was 2.59 time that of the group given Tp5 (ig).