• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.645-656
• /
• 2020

In this study (Part II), the empirical formulation of corrosion model of a ship's ballast tank was developed to predict nonlinear time-dependent corrosion wastage based on the advanced data processing technique proposed by Part I. The detail on how to propose generalised mathematical formulation of corrosion model was precisely documented in the previous paper (Part I). The statistical scatter of corrosion data at any exposure time was investigated by the refined method and formulated based on a 2-parameter Weibull distribution which selected the best fit PDF. Throughout the nine (9) steps, empirical formulation of the ship's seawater ballast tank was successfully proposed and four (4) key step results were also obtained. The proposed method in Part I was verified and confirmed by this application of seawater ballast tank, thus making it possible to predict accurate behaviours of nonlinear timedependent corrosion. Developed procedures and obtained corrosion damage model for ship's seawater ballast tank can be used for development of engineering software.

• Steel and Composite Structures
• /
• v.38 no.4
• /
• pp.463-476
• /
• 2021

The concept of using Steel-concrete (SC) composite walls as retaining walls has recently been introduced by the authors and their effectiveness of resisting out-of-plane loads has also been demonstrated. In this paper, an improved analytical formulation based on partial interaction theory, which has previously been developed by the authors, is presented. The improved formulation considers a new loading condition and also accounts for cracking in concrete to simulate the real conditions. Due to a limited number of test specimens, further finite element (FE)simulations are performed in order to verify the analytical procedure in more detail. It is observed that the results from the improved analytical procedure are in excellent agreement with both experimental and numerical results. Moreover, a detailed parametric study is conducted using the developed FE model to investigate effects of different parameters, such as distance between shear connectors, shear connector length, concrete strength, steel plate thickness, concrete cover thickness, wall's width to thickness ratio, and wall's height to thickness ratio, on the behavior of SC composite walls subjected to out-of-plane loads.

• Structural Engineering and Mechanics
• /
• v.88 no.1
• /
• pp.83-94
• /
• 2023

An accurate and highly efficient inverse element labelled iPCB is developed based on the inverse finite element method (iFEM) for real-time shape estimation of plane-curved structures (such as arch bridges) utilizing onboard strain data. This inverse problem, named shape sensing, is vital for the design of smart structures and structural health monitoring (SHM) procedures. The iPCB formulation is defined based on a least-squares variational principle that employs curved Timoshenko beam theory as its baseline. The accurate strain-displacement relationship considering tension-bending coupling is used to establish theoretical and measured section strains. The displacement fields of the isoparametric element iPCB are interpolated utilizing nonuniform rational B-spline (NURBS) basis functions, enabling exact geometric modelling even with a very coarse mesh density. The present formulation is completely free from membrane and shear locking. Numerical validation examples for different curved structures subjected to different loading conditions have been performed and have demonstrated the excellent prediction capability of iPCBs. The present formulation has also been shown to be practical and robust since relatively accurate predictions can be obtained even omitting the shear deformation contributions and considering polluted strain measures. The current element offers a promising tool for real-time shape estimation of plane-curved structures.

• YAKHAK HOEJI
• /
• v.44 no.6
• /
• pp.578-587
• /
• 2000

The purpose of the present study was to design and prepare the optimum formulation for the oral administration of titrated extract of the unsaponifiable fraction of Zea mays L. (ETIZM). For this purpose, we simulated the blood concentration of ETIZM after its oral administration, changing the dissolution rate constants $(0.05{\sim}20\;hr^{-1})$. In vivo parameters, such as absorption rate constant $(k_a)$, elimination rate constant (k) and volume of distribution (Vd), were incorporated in the simulation on the basis of the experiments and literatures. When the dissolution rate constant $(k_r)$ is over $5\;hr^{-1}$, the absorption process appears to be the rate limiting step for the transport of ETIZM from the G.I. ract to the blood circulation. While less than $5\;hr^{-1}$, the dissolution rate considered to be the rate limiting step. Moreover, the optimum blood concentration was shown in the range from 1 to $5\;hr^{-1}$ of $k_r$ in the simulation. To design and prepare the tablets on the basis of the above results, 7 formula containing HPMC, PEG 4000 and PEG 6000 (1-5%, respectively) were prepared and evaluated. The tablets containing PEG 4000 (1%), PEG 6000 (1%) or PEG 4000 (5%) satisfy the optimum $k_r$ range ($1-5\;hr^{-1}$). These formulations, therefore, will be able to show the more effective blood concentration, compared with the commercial products after the oral administration.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.3
• /
• pp.263-275
• /
• 2000

Multidisciplinary design optimization(MDO) can yield optimal design considering all the disciplinary requirements concurrently. A method to implement the collaborative optimization(CO) approach, one of the MDO methodologies, is developed using a pre-compiler “EzpreCompiler”, a design optimization library “EzOptimizer”, and a common object request broker architecture(CORBA) in distributed computing environment. The CO approach is applied to a mathematical example to show its applicability and equivalence to standard optimization(SO) formulation. In a realistic engineering problem such as optimal design of a two-member hub frame, optimal design of a speed reducer and initial design of a bulk carrier, the CO yields better results than the SO. Furthermore, the CO allows the distributed processing using the CORBA, which leads to reduction of overall computation time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.277-282
• /
• 2003

Computational calculations are now successfully introduced to design liquid crystal molecules for uses in modern active-matrix displays. These material technologies are practically applied to develop novel compounds, enabling formulation of advanced liquid crystal mixtures together with a newly developed mixture purification method. Typical examples of these liquid crystal mixtures are introduced for modern displays in various applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.83.6-83
• /
• 2002

$\textbullet$ Disturbance observer $\textbullet$ Performance enhancement $\textbullet$ LFT formulation $\textbullet$ Structured singular value $\textbullet$ Maximum bandwidth of DOB $\textbullet$ DVD experiments $\textbullet$ Robust stable disturbance observer

• Journal of Korean Society for Quality Management
• /
• v.35 no.4
• /
• pp.52-60
• /
• 2007

A multi-attribute robust design methodology is presented. This method can be applied where there are various technical constraints in design variables, multiple potentially conflicting design attributes, and uncontrollable noise variables. Two forms of technical constraints, soft and hard constraints, are considered in robust design settings. Specifically, this work presents procedures for integrating two types of design constraints seamlessly on the multiple design attributes, which is achieved through a development of multi-attribute utility formulation. The effectiveness of the overall procedures is tested with the aid of an I-Beam design problem, and results of sensitivity analysis are discussed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.335-342
• /
• 2002

A continuum-based design sensitivity analysis (DSA) method fur non-shape problems is developed for geometrically nonlinear elastic structures. The non-shape problem is characterized by the design variables that are not associated with the domain of system like sizing, material property, loading, and so on. Total Lagrangian formulation with the Green-Lagrange strain and the second Piola-Kirchhoff stress is employed to describe the geometrically nonlinear structures. The spatial domain is discretized using the 4-node isoparametric plane stress/strain elements. The resulting nonlinear system is solved using the Newton-Raphson iterative method. To take advantage of the derived analytical sensitivity In topology optimization, a fast and efficient design sensitivity analysis method, adjoint variable method, is employed and the material property of each element is selected as non-shape design variable. Combining the design sensitivity analysis method and a gradient-based design optimization algorithm, an automated design optimization method is developed. The comparison of the analytical sensitivity with the finite difference results shows excellent agreement. Also application to the topology design optimization problem suggests a very good insight for the layout design.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.1
• /
• pp.14-18
• /
• 2009

This paper proposed an optimal plate spring design for the optical image stabilizer in mobile phones. The voice-coil motor (VCM) with plate spring is the smallest, lowest-cost solution for auto focus on the market today and it is also the simplest to implement. The VCM is selected in this paper for auto focusing. However, the design process is complex due to the many design variables coupled to each other and some constraints of each directional motion caused by the characteristics of plate spring. Because of the complex formulation of the design objective, a plate spring design is proposed through the design of experiments to find the optimal design satisfying design constraints.