• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.492-497
• /
• 2001

In the finite element analysis of metal forming processes using general Lagrangian formulation, element nodes in the mesh move and elements are distorted as the material is deformed. The excessive degeneracy of mesh interrupts finite element analysis and thus increases the error of plastic deformation energy. In this study, a remeshing scheme using so-called mesh compression method is proposed to effectively analyze the flash which is generated usually in hot forging processes. In order to verify the effectiveness of the method, several examples are tested in two-dimensional and three-dimensional problems.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.2
• /
• pp.239-249
• /
• 2003

The purpose of this research was to investigate influential factors for shopmaster's CRM (Customer Relationship Management) in the designer brand products, and to indicate the future fashion marketing strategies. The questionnaires were distributed to 74 shopmasters of the Designer shop in domestic L. S and H Department stores. Descriptive statistics, factor analysis, and path analysis from Lisrel program were used to analyze the data. The results were as follows; Firstly. for shopmaster's CRM variables, four factors of customer management variables were found and labeled as interest, DB construction, contact opportunity, and materials. Also, four (actors of shopmaster's knowledge regarding apparel materials were found and labeled as professionalism, manner, sense, and persuasion. For service variables, four factors such as precision, variety, rapidity, positiveness, and convenience of shopping were found. Secondly, for the results of hypothesis, all of the independent variables had direct influences on forming the relationship with customers. Therefore, it is concluded that the main elements of Shopmaster's CRM are highly important variables in customer relationship marketing strategy.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.598-603
• /
• 2001

For metal forming analysis, upper-bound solution is practical method because the solution is overestimated. It is limited to determine stresses on tools by using upper-bound solution. In this study, new scheme to calculate stresses on tools based on upper bound solution is proposed. To verify the proposed scheme, plane strain drawing has been considered. The stresses on tools obtained by the proposed scheme are compared with results of rigid plastic FEM. And the stresses on tools have been determined by the proposed scheme in the forging within plane strain deformation.

• Transactions of Materials Processing
• /
• v.9 no.3
• /
• pp.313-319
• /
• 2000

Finite element analysis is carried out for simulation of the multi-stage elliptic cup drawing process with the large aspect ratio. The analysis incorporates with shell elements for an elasto-plastic finite element method with the explicit time integration scheme. For the simulation, LS-DYNA3D is utilized for its wide capability of solving forming problems. The simulation result shows that the non-uniform drawing ratio at the elliptic cross section ad the small shoulder radius cause failure such as tearing and wrinkling. The result suggests the guideline to modify the tool shape for prevention of the failure during the drawing process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.64-74
• /
• 2007

The continuous chip in turning operation deteriorates precision of workpiece and causes a hazardous condition to operator. Thus the chip form control becomes a very important task for reliable machining process. So, grooved chip breaker is widely used to obtain reliable discontinuous chip. However, developing new cutting insert having chip breaker takes long time and needs lots of research expense due to a couple of processes such as forming, sintering, grinding and coating of product and many different evaluation tests. In this paper, performance of commercial chip breaker is evaluated with neural network which is learned with a back propagation algorithm. For the evaluation, several important elements(depth of cut, land, breadth, radius) which directly influence the chip formation were chosen among commercial chip breakers and were used as input values of neural network. With the results of these input values, the performance evaluation method was developed and applied that method to the commercial tools.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.89-97
• /
• 2016

The aim of this study is to review Norberg-Schulz's architectural phenomenology to find out its meaning and limitations in contemporary architecture. His phenomenological trilogy, 'Existence, Space and Architecture', 'Genius Loci' and 'The Concept of Dwelling' are main texts to examine background, characteristics, meaning and limitations of his theory in relation to Structuralism and Heidegger's thoughts. Heidegger's phenomenology, especially his dwelling concept, had great impacts on forming Norberg-Schulz's architectural phenomenology. However, since his architectural phenomenology was strongly influenced by Structuralism, his theories present unstable combination of phenomenology and semiotics. And this results in instrumentalization, and overlooking body movement and socio-economical elements in his theory. In spite of these limitations, his theory also shows possibility to go beyond the theory of Modern architecture and plays important role in suggesting direction for better environment through applicability from single building to city in Postmodern architecture. Another meaning of his theory lies in presenting theoretical background for new way to interpret regionalism and specific policy tool to make town planning in Finland.

• Structural Engineering and Mechanics
• /
• v.13 no.1
• /
• pp.103-116
• /
• 2002

A solution based on the linear three-dimensional theory of elasticity is developed for vibration and elastostatic problems of hollow toroids. The theory is developed for transversely isotropic toroids of arbitrary thickness, and has the potential to validate some vehicle and aircraft tire models in the linear range. In the semi-analytical method that is adopted Fourier series are written in the circumferential direction, forming a set of two-dimensional problems. These problems are solved using the differential quadrature method. A commercial finite element program is used to determine alternative solutions. For validation both problems of vibration and elastostatics are considered. Finally results are determined for local surface loading problems, and conclusions are drawn.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.17-19
• /
• 2001

In this paper, eigenvalue perturbation theory and its applications for the augmented system matrix are described. This theory is quite useful in the cases where any change in a system parameter results in signifiant changes to most of the elements of the augmented matrix or where the forming of sensitivity matrix so complicate. And AMEP(augmented matrix eigenvalue perturbation) for the excitation system parameters are computed for analysis of small signal stability of KEPCO 215-machine 791-bus system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.556-561
• /
• 1988

Shrink-rings (Stress-rings) are used in the fabrication of dies for cold forming and powder compaction processes to increase the allowable pressures for a given die material. Optimum procedures are to minimize a die thickness under the conditions that the stress distributions in the die and stress-rings utilize fully the strength available in each of the die elements. This paper proposes a new approach, where the maximum allowable shrinking pressures are calculated on shrinkage plans in the radial direction and the fractional shrinking pressures below the maximum allowable pressures are used as the design values. Two criteria for the optimal die design are used: Maximum shear stress limit for one-piece dies and zero tensile stress limit for combined dies. A computer program, DIECOM, is developed for illustrating the computer-aided design procedures. Finally, examples for each case are presented in this paper.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1335-1338
• /
• 2002

This paper presents the analysis of the required limit on a multibeam active phased array antenna (APAA) aperture using the statistical simulation for a High Altitude Platform Station (HAPS). The simulation takes into account the random errors caused by the non-identity of the array elements and the inaccuracy of the antenna calibration. The results of our statistical simulation show that the strict requirements on the sidelobe envelope for HAPSs can be met when the amplitude and phase distribution errors are minor, a condition which may be achieved by using digital beam forming.