• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.791-797
• /
• 2003

진동성형용 캐스터블을 제조하기 위하여 p-알루미나를 주결합제로 사용하였으며 결합강도를 증진시키기 위하여 나노크기의 점토를 첨가하는 등 특별한 결합기구를 도입하여 기존 캐스터블보다 고밀도, 저기공율 그리고 높은 강도를 얻을 수 있었다. 그리고 적은 수분첨가로 치밀한 캐스터블을 제조할 수 있었다. 캐스터블의 매트릭스 부분을 잘 조절함으로서 치수 안전성을 확보한 기계적 강도 및 침식저항 특성이 개선되었다. 150$0^{\circ}C$에서 열처리한 후의 꺽임강도와 압축강도는 각각 92.34 kgf/$ extrm{cm}^2$ 및 370 kgf/$\textrm{cm}^2$ 이고 뮬라이트 형성을 위한 활성화에너지는 11.47 kcal/mo1이다.

• 대한간호학회지
• /
• 제27권3호
• /
• pp.531-540
• /
• 1997

The purpose of this study is to reinterpretate the history of nursing and health care from the view-point of post-structuralism. It has been emphasized that the development of modern health care has been due to the progressive efforts of medicine and to medical discoveries. Medicine has dominated the history of health care rather than nursing or other health professions. The present study adopts the post-structural method by Foucault, which tries to unite language and knowledge. Foucault examines "the institutionalization of knowledge and the power exerted thereby, with special reference to the devices of social regulation and their function over the madness, the disease, the crime, and the sexuality. " The concept of power in Foucault's writing is that it is exerted spontaneously in verbal behaviors of individuals through knowledge of everyday life such as definition of body or mind, sexuality and relationship of family. Therefore as to the problem of power, this study tries to understand the meaning of the health care history through an analysis of the formation of medical discourse. In order to have authority in a power relation, the medical professional asserts that medical discourse is the most scientific knowledge. The authority of medical professionals can be reinforced by the fact that male medical professionals outnumber female. Devaluation of nursing care is reinforced by the medicine which has the legitimate authority through use of the political skills.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.740-748
• /
• 1998

The inertia friction properties of C/C composites manufactured by the processes of pressure and at-mospheric carbonizaton with a commerciallized and two kinds of modified coal-tar pitch as a matrix pre-cursor were investigated. The modifications of a pitch such as the introduction of mesophase and the ad-dition of sulphur into a raw pitch were not effective for a impregnation efficiency conducted in a vacuum and at the same time in a pressure of 5kg/cm2 due to the increase of the pitch viscosity. There was not a difference in the densification increment between the pitch modifications however it was revealed that a pressure carbonization was more advantageous than an atmospheric in the densification and the formation of anisotropic carbon matrix. The friction and wear propertis of C/C having higher degree of matrix cry-stallization higher density and hardness of friction surface showed superiority. As the braking energy was increased the friction coefficients were decreased and reached almost same level at the high kinetic energy of 99.6kJ. The wear trends at 99.6kJ were different from the behaviors of friction ceofficient under the same energy in which an oxidation wear is being considered along with a mechnical wear although the wear rates were almost similar to the friction coefficient at the low energy.

• 한국세라믹학회지
• /
• 제45권10호
• /
• pp.638-643
• /
• 2008

Biomimetic apatite formation and deposition behaviors of Ti-6Al-7Nb and Ti-6Al-4V plates in simulated body fluids(SBF) under various conditions were examined. In case of regular samples without collagen treatments the weight gain due to apatite precipitation on the surface in Ti-6Al-4V was found to be higher than in Ti-6Al-7Nb. In case of collagen-coated samples, the weight gain in Ti-6Al-4V continued to be higher than in Ti-6Al-7Nb, but the difference between the two became smaller. Both Ti-6Al-7Nb and Ti-6Al-4V samples with collagen coating exhibited an appreciable increase of weight gain, which may be caused by the interaction between collagen and $Ca^{+2}$ ions. The weight gain was found to be not much affected by the addition of collagen to SBF. The ill-defined granular structure in the presence of collagen can be associated with the increasing volume fraction of amorphous calcium phosphate.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.88-91
• /
• 2007

Animal cells show different behaviors in response to the mechanical properties of the substrates. We hypothesize that the rigidity of the substrates also affects the bacterial motility and controls the colony dynamics. It is found that the colony size of Escherichia colis and Bacillus subtilis grown on the agar plates is correlated with agarose gel concentrations and thus with the substrate rigidity. High- resolution microscopic imaging reveals that bacteria in single colonies form different aggregation patterns on the agar plates with varying gel concentration. We measured the apparent diffusion coefficients in the agarose gel plates made with different gel concentrations. Mathematical modeling and quantitative imaging of dye dispersion in the agar plates suggest that there is a close connection between the diffusion rate and the colony size. Nanoscale pore structures and kinetic constraints in the porous media may have an effect on bacterial colony dynamics.

• 대한화학회지
• /
• 제34권4호
• /
• pp.345-351
• /
• 1990

역상 고성능 액체 크로마토그래피에 Cu (Ⅱ)-L-Proline 킬레이트를 이동상에 첨가하여 답실아미노산(DABS-AA)을 광학분리했다. DABS-아미노산에 관한 머무름거동을 이동상으로 아세토니트릴, 착물 및 완충용액의 농도와 pH에 따라 연구 검토했다. DABS-아미노산의 광학분리선택성은 이동상의 pH와 킬레이트의 농도가 증가하면 증가하나 유기용매의 농도에 따라 감소한다. 완충액의 농도에는 무관하다. DABS-아미노산과 구리 착물간의 리간드 교환반응의 입체효과에 따른 시스-트란스 생성으로 분리메카니즘을 설명할 수 있다.

• Journal of Ginseng Research
• /
• 제11권1호
• /
• pp.1-9
• /
• 1987

인삼추출물(95%, 50% 에탄올 및 수침액) ginsenoside Re 및 ginsana G115를 공식약물로 해서 thioacetamide로 intoxication 시킨 동물에 대한 in vitro, in vivo test를 통해 예방적 효과 및 치료적인 효과에 대해서 실험하였다. 항산화작용에 있어서 ginsenoside Re, 수침액, Ginsana C 115가 통계적으로 유효하였으며 zine sulfate turbidity test에서는 95% 에탄올 추출물과 ginsenoside Re가, GOT에 대해서는 Ginsana G 115, GPT에 대해서는 ginsenoside Re가 통계적인 유효성을 나타냈다. Venom toxin과 compound 48/80에 의한 mast cell의 탈과립현상에 대한 방어시험에서 50% 에탄올 추출물, 수침물, 95% 에탄올 추출물 및 Ginsana G 115가 유효하였다.

• Journal of Welding and Joining
• /
• 제24권4호
• /
• pp.22-26
• /
• 2006

In lap welding of zinc-coated steel, porosity formation is one of most significant weld defects, which is caused by zinc vapor generated between the steel sheets. Various solutions have been proposed in the past years but development of more effective method is a worthwhile subject to be investigated. In this study, autogenous laser welding and laser-TIG hybrid welding was applied to the lap welding of zinc-coated steel without gap, and weld pool behaviors were observed by using high speed camera and the porosity generation mechanism was analyzed. The weld defects were successfully eliminated by laser-TIG hybrid welding. This is because the leading TIG arc partially melted the upper sheet and vaporized/oxidized the coated zinc on the lapped surfaces prior to the trailing laser illuminating the specimen.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.262-262
• /
• 1990

In order to check the effect of dislocation behavior on creep rate in 12% Chromium steel, 14 samples of different compositions were examined by creep rupture test, and subgrain sizes, distribution of dislocations and precipitates were checked. And, authors reviewed the behaviors of dislocations, the formation and growth of subgrains and precipitates during creep. The results are as the following: 1) Creep rates calculated by .epsilon. over dot = .rho.bv show 10-15% higher values than actual data measured. However, authors conclude that the density and velocity of dislocations together with subgrain size are important factors governing deformation during creep in 12% chromium steel. 2) The values of the strength of obstacles in the mobility of dislocations are more clearly depended on the effective stress in the range of $10{\pm}5kgf/mm^{2}$ and increase with the increase of temperature. 3) Creep rates decrease with the smaller sizes of subgrains formed and can result in the longer creep rupture lives(hours). The smaller subgrains can be made by forming shorter free gliding distances of dislocations with very fine precipitates formed in the matrix during creep by applying proper alloy design. 4) Dislocation mobility gets hindered by precipitates occurring, which are coarsened by the softening process governed by diffusion during long time creep.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.112-120
• /
• 1990

In order to check the effect of dislocation behavior on creep rate in 12% Chromium steel, 14 samples of different compositions were examined by creep rupture test, and subgrain sizes, distribution of dislocations and precipitates were checked. And, authors reviewed the behaviors of dislocations, the formation and growth of subgrains and precipitates during creep. The results are as the following: 1) Creep rates calculated by .epsilon. over dot = .rho.bv show 10-15% higher values than actual data measured. However, authors conclude that the density and velocity of dislocations together with subgrain size are important factors governing deformation during creep in 12% chromium steel. 2) The values of the strength of obstacles in the mobility of dislocations are more clearly depended on the effective stress in the range of $10{\pm}5kgf/mm^{2}$ and increase with the increase of temperature. 3) Creep rates decrease with the smaller sizes of subgrains formed and can result in the longer creep rupture lives(hours). The smaller subgrains can be made by forming shorter free gliding distances of dislocations with very fine precipitates formed in the matrix during creep by applying proper alloy design. 4) Dislocation mobility gets hindered by precipitates occurring, which are coarsened by the softening process governed by diffusion during long time creep.