• 한국안전학회지
• /
• 제29권5호
• /
• pp.29-34
• /
• 2014

The live line working is inherently dangerous as the workers have to work under the risk of electrical shock and most of works are carried out at height. The live line working need the some specific techniques and higher level safety measures such as a risk assessment to carry out works safely, but the electrical construction companies performed live-line working are usually small-sized companies. They have less capacity to have own safety management system. This study intended to conduct an in-depth analysis on the cause of electric shock accidents to provide basic data for policy proposing taking into considering the past eleven years for a long-term plan. And the aim of this study is to propose the policy about the equipment performance standards and/or worker's safety standards to revise the standards for preventing electric shock accidents, moreover, co-relation of the electrical work order form and on safety workings, especially electrical construction company/work.

• 보건행정학회지
• /
• 제13권1호
• /
• pp.46-68
• /
• 2003

In the model tested here, individual innovative work behavior is considered as the outcome of two antecedent factors-empowerment and organizational supports. The relationships between those variables and innovative work behavior are analyzed form the data collected through a questionnaire survey of 389 employees in five general hospitals. Results of multiple regression analyses show that three dimensions of empowerment-meaning, competence, and impact, and supports from organizational culture have significant effects on innovative work behavior whereas the effects of choice dimension of empowerment and managerial supports are not significant. These results emphasize the importance of empowerment and innovation oriented organizational culture for individual members' innovative work behavior. Theoretical and practical Implications and suggestions for future research are discussed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.157-160
• /
• 2003

In order to reduce the construction cost and period without degrading the quality, construction companies are making a lot of efforts to prefabricate and mechanize the construction process, and introducing and utilizing various techniques of construction time management in the process of construction. However, due to the various factors (such as weather conditions, labor factors, supply of equipment and materials, safety accident, etc) in the process of construction, construction projects are not frequently completed within the scheduled Period. This research is to examine the current status of construction time management and factors causing delay in construction with regard to the concrete work (such as form work, steel reinforcement, and concrete work) in building apartments.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.33-39
• /
• 2004

The chemical factory deals with dangerous element and more advance, human-error analyzes and becomes effective research for the country and region, this paper analyes the form of work-miss on human-error according to a safety accident for domestic chemical factory from 1999-2002. It include the present contents and raise issues human knowledge, behavior, judgment, sensibility as an important counterplan that makes the safety solution of work miss. For the point of view of human knowledge, it takes color standard for works to be effective in work place. for behavior, the test has been for risk point of work place and infra worker movement, also the workers performed professional work as classify according to work. for judgement, the valuation sheet is reflected to minimize the human -error and the 3rd supervisor does a cross-check audit beforehand. For sensibility, it is applicable for human relations, information, communication by program to the consciousness and an attitude of worker-supervisor.

• 한국콘텐츠학회논문지
• /
• 제21권3호
• /
• pp.88-102
• /
• 2021

본 연구는 박물관 건축의 작품 중 특별 전시의 기능을 제외한 상설전시가 주를 이루는 박물관을 중심으로 하였다. 사례연구를 통해 나타난 정형, 비정형, 세그먼트, 사선형의 형태를 기준으로 하여, 164건의 작품사례에 적용한 결과 건축형태를 비정형, 정형, 반정형, 세그먼트, 사선형, 선형으로 재분류 하고, 박물관 건축 형태와 중심 공간과의 상관성의 유무를 유추함으로써 비정형 건축형태와 중심공간과의 관계가 성립하는가를 도출하고자 다음과 같이 내용을 정리하였다. 전체적으로 대부분 비정형박물관건축형태와 일치하는 중심공간의 비정형 형태로서 92.7% 분포도를 나타났다. 결과적으로 전반적으로 박물관 비정형 건축형태가 다수 나타났으며 정형보다는 비정형 건축형태에 있어서 중심공간과의 상관성이 성립되는 것으로서 향후 박물관 건축형태는 비정형이 지속적으로 발전 할 것으로 추정되고 중심 공간 실내건축 설계는 건축형태와의 상관성을 고려하여 설계를 지향하는 기초적 근거자료로서 제시하고자 한다.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.446-449
• /
• 2003

우리나라의 최근의 건설공사의 형태를 보면 초고층 아파트, 대형 주상복합 건물 등 대형주거용 건축물들이 등장하고 입다. 이러한 건설공사의 대형차 추세에 따라 공사기간, 공사비용 등이 크게 증가하였다. 이에 공사기간 및 공사비용을 절약하고 프로젝트의 성공을 위한 건설관리 기법들의 연구가 활발히 진행되고 있다. 본 연구에서는 초고층 주거건축의 마감공사 중에서 공사규모, 자재의 양중 측면에서 많은 부분을 차지하고 있는 가구공사의 관리체계를 정립하기 위하여, 적시생산(Just-In-Time)방식과 린건설(Lean Construction)의 개념을 도입하였다. 생산성 향상을 위한 위의 두 가기 원리를 이용하여 가구공사의 프로세스를 분석하고 그에 따른 개선방안을 제시하고자 한다. 이러한 분석과 개선방안의 제시는 마감공사의 원활한 흐름을 유도할 수 있으며, 또한 공사기간 및 공사 비용을 절약함으로써 프로젝트의 성공에 기여할 수 있다.

• 박물관보존과학
• /
• 제14권
• /
• pp.29-35
• /
• 2013

백자투각연당초문지통과 같이 기형 및 장식기법이 복잡한 도자기의 경우, 기존에 사용되고 있는 복원제는 경화시간이 짧아 정교한 성형이 어려워 틀을 이용하여 복원한다. 하지만 틀을 이용한 복원 또한 시간적, 재료적인 단점이 있기 때문에 직접 복원하는 방법을 연구하고자 하였다. 복원제의 경화시간과 물성은 작업성과 밀접한 관계가 있기 때문에 복잡한 형태의 복원부를 직접 성형할 때는 충분한 가사시간이 확보되는 복원제가 필요하다. 소성점토(Original Sculpey)와 에폭시퍼티(Repair it Quik)를 각기 다른 비율로 혼합하여 가사시간, 색도 변화, 작업성에 대한 실험을 하였다. 실험결과 OS8 : RQ2의 비율로 혼합하였을 경우 가사시간이 충분하고 성형성이 좋았으며 황변도가 낮고 채색성이 좋아 가장 효과적이라는 것을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.785-788
• /
• 2004

In order for concrete as a basic material constituting reinforced concrete structure to meet the required performance, it is necessary to satisfy various requirements in concrete construction. Among them, form work has significant effects not only on the process of molding fresh concrete but also on the quality and performance of hardened concrete. Recently, the decrease and aging of form workers is becoming a great problem in the construction industry and, as a result, it is required to rationalize form works and reduce labor costs for employing form workers.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.6-7
• /
• 2021

Although the development of free-form architectural technology continues, it consumes a lot of money and time due to the one-time formwork and the difficulty of maintaining quality due to manual work. To this end, in this study, a shape connection technique was proposed and verified to improve the limitations of implementing the curved surface of the existing lower multi-point press. In order to improve the accuracy of the shape, a curved surface was implemented using a silicon cap and a silicon plate. As a result of the error analysis of the shape, a small value of less than 3 mm was found. This study can implement more accurate curved surfaces than conventional technologies and produce high-quality free-form panels.