• Journal of Chest Surgery
• /
• 제25권5호
• /
• pp.544-549
• /
• 1992

Carcinoid tumors can be ubiquitous, but most will originate in four sites: appendix [38%], small intestine[24%], rectum[13%] or bronchus[11.6%]. And bronchial carcinoids are rare, accounting for only 1% to 6% of all primary lung tumors. Familial adenomatous polyposis cali, the most common form of the polyposis syndromes attributable to a genetic defect, is defined by demonstration of at least 100 adenomatous polyps in the large intestine. We experienced a case of typical bronchial carcinoid with familial adenomatous polyposis cali in 23 year old female patient, which was surgically treated by left lower lobectomy.

• Journal of Periodontal and Implant Science
• /
• 제37권3호
• /
• pp.465-478
• /
• 2007

Various periodontal barrier membranes used in many clinical and experimental fields, and many recent studies of membranes have reported good results. To improve clinical results, selection of barrier membranes is an important factor. So, we need not only to evaluate various barrier mem-branes, but also to understand the property of barrier membranes appropriate to defect characteristics. For this purpose, this study reviewed available literature, evaluated comparable experimental models, and compared various barrier membranes. From above mentioned methods, the following conclusions are deduced. 1. In i-wall periodontal defect models, new bone formation showed a consistent result, almost 30% of the defect size. New cementum formations measured mostly 40% of the defect size, but showed more variations than new bone formations. This seems to be resulted form difference in experimental methods, so standardization in experimental methods is needed for future studies. 2. Application PLGA barrier membrane to periodontal defect demonstrated improved healing in new bone and new cementum. 3. There was a minimal periodontal regeneration with calcium sulfate barrier membrane only. But, there was better healing pattern in combination of calcium sulfate membrane with bone graft material, such as DFDBA, 4. There was no significant difference between the experimental group that used chitosan mem-brane only and the control group. But, in combination with bone graft material for space maintanence, periodontal regeneration was improved. Overall, Space maintenance is a critical factor for Guided tissue regeneration using barrier membranes. Also, a barrier membrane itself that has difficulty in maintaining space, achieved better result when used with graft material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.86-87
• /
• 2009

High quality $CuInSe_2$ (CIS) were grown on GaAs substrate by using the hot wall epitaxy method. The behavior of point defects in the CIS layer investigated by using photoluminescence (PL) at 10 K. Point defects originating from $V_{Cu}$, $V_{Se}$, $Cu_{int}$, and $Se_{int}$ were classified as donor or acceptor types. These PL results also led us to confirm that the p-type CIS layer had obviously converted into n-type after the Cu atmosphere treatment. Finally, we found that the In in the CIS layer did not form the native defects, because In existed in the form of stable bonds in the CIS layer.

• Journal of Chest Surgery
• /
• 제16권1호
• /
• pp.176-182
• /
• 1983

Malignant lymphoma in chest wall is a rare form of extranodal variety as occasionally localized tumor. The primary site is suggested from rib or soft tissue, but the incidence in rib is higher than soft tissue. The patient, a male, aged 32, noted a swelling and pain over the left lower posterior chest from 3 months prior to admission. Roentgenograms revealed bony destruction in left 9, & 19th ribs posteriorly and associated chest wall mass which was ill defined uncleared margination. Under diagnosis of malignant tumor, the operation was performed and the tumor mass resected widely with en bloc technique than the fascia lata was grafted at chest wall defect. The histology of specimen was disclosed as malignant lymphoma, non-Hodgkin`s diffuse lymphocytic poorly differentiated form. The radio-and chemotherapy were combined post-operatively and the complete remission is acquired.

• Journal of Chest Surgery
• /
• 제30권10호
• /
• pp.1019-1023
• /
• 1997

우측 폐동맥이 대동맥에서 이상기시되는 기형은 선천성 심장질환의 드문 형태이고 치명적이다. 주로 동맥관개존과 같이 동반되어 나타나며, 대개 출생후 이른 유아기에 사망한다. 우폐동맥의 이상기시는 좌폐동맥의 이상기시에 비해 더욱 많은 빈도를 나타내며, 비정상적인 우폐동맥은 주로 대동맥판막에 인접한 상행대동맥의 뒤쪽편에서 주로 기시한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.179-179
• /
• 2021

Top-Down construction method is a method of connecting a beam to a column and using a strut to support earth retaining walls. This method has the advantage of reducing the process of underground construction by reducing the work of installation. Recently, there are a lot of cases of damage and defect occurring in H-beam backfill applied to Top-Down construction method and the concrete slab supporting H-beam backfill. For this, appropriate methods were suggested through finite element analysis of the position and installation form of the H-beam backfill.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.141-142
• /
• 2008

Single crystal $ZnIn_2S_4$ layers were grown on thoroughly etched semi-insulating GaAs(100) substrate at $450^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating $ZnIn_2S_4$ source at $610^{\circ}C$. The temperature dependence of the energy band gap of the $ZnIn_2S_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g$(T) = 2.9514eV - ($7.24\times10^{-4}$ eV/K)$T^2$/(T + 489 K). After the as-grown $ZnIn_2S_4$ single crystal thin films was annealed in Zn-, S-, and In-atmospheres, the origin of point defects of $ZnIn_2S_4$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{Zn}$, $V_s$, $Zn_{int}$, and $S_{int}$, obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the S-atmosphere converted $ZnIn_2S_4$ single crystal thin films to an optical p-type. Also, we confirmed that In in $ZnIn_2S_4$/GaAs did not form the native defects because In in $ZnIn_2S_4$ single crystal thin films existed in the form of stable bonds.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.98-99
• /
• 2008

To obtain the single crystal thin films, $AgGaSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $630^{\circ}C$ and $420^{\circ}C$, respectively. The temperature dependence of the energy band gap of the $AgGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g$(T) 1.9501 eV - ($8.79\times10^{-4}$ eV/K)$T^2$/(T + 250 K). After the as-grown $AgGaSe_2$ single crystal thin films was annealed in Ag-, Se-, and Ga-atmospheres, the origin of point defects of $AgGaSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10K. The native defects of $V_{Ag}$, $V_{Se}$, $Ag_{int}$, and $Se_{int}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Ag-atmosphere converted $AgGaSe_2$ single crystal thin films to an optical p-type. Also, we confirmed that Ga in $AgGaSe_2$/GaAs did not form the native defects because Ga in $AgGaSe_2$ single crystal thin films existed in the form of stable bonds.

• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.185-190
• /
• 2001

The purpose of this study is the development of practical Dry floor tile unit method that settle the defect of a wet method and designed for resin mat. With use of PE resin which is confirmed the basic property, it is developed that resin mat, joint-sealing compound with fixed form and space management to Dry floor tile unit method. The result of this study is below. 1) To acquire above the 4kgf/$\textrm{cm}^2$ - construction specification criterion, the bonding space that between resin mat and tile has to occupy the 50% of resin mat module space(10,000$\textrm{cm}^2$). 2) Criteria of bonding part plane is below. simpleness of metal form. productivity, uniform quality after injection molding cooling, easy cutting for remain space management, adhesive property, construction ability, transformation of a severed piece under pressure and so on. 3) To get the shape that could protect the interfacial breakdown, it is designed that resin mat and tile are unified after the bond input. 4) Adapted joint-sealing compound is the material of urethane kinds wedge form. Resin mat has the water passageway that could drain the water. 5) To manage the severed piece of tile, the resin mat is likely to divide the half and the quarter and the plastic drainage is developed in the severed piece.

• 대한유전성대사질환학회지
• /
• 제2권1호
• /
• pp.7-11
• /
• 2002

저자들은 잘 교정되지 않는 대사성 산혈증을 주소로 내원한 3세된 남아와 원인 모르는 기면과 구토로 5차례 입원했던 과거력을 가진 8세된 남아 형제가 유기산 분석에서 isovalerylglycine의 현저한 증가를 보여 만성 간헐형의 isovaleric acidemia로 진단된 예와 탄뎀질량분석검사에서 isovaleric acidemia로 진단되어 조기치료하고 있는 예를 경험하였기에 보고하는 바이다.