• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.237.3-238
• /
• 2003

Tissue engineering may be adequately defined as the science of persuading the body to regenerate or repair tissue that fail to regenerate or heal spontaneously. In the various techniques of cartilage tissue engineering, the use of 3-dimensional polymeric scaffolds implanted at a tissue defect site is usually involved. These scaffolds provided a framework for cells to attach, proliferate, and form extracellular matrix(ECM). The scaffolds may also serve as carriers for cells and/or growth factors. In the ideal case, scaffold absorb at a predefined rate so that the 3-dimensional space occupied by the initial scaffold is replaced by regenerated host tissue. (omitted)

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.109-115
• /
• 2020

Five layers in mean flow are proposed by using the direct numerical simulation data of turbulent pipe flow up to Reτ = 3008. Viscous sublayer, buffer layer, mesolayer, log layer and core region are investigated. In the buffer layer, the viscous force is counterbalanced by the turbulent inertia from the streamwise mean momentum balance, and a log law occurs here. The overlap layer is composed of the mesolayer and the log layer. Above the buffer layer, the non-negligible viscous force causes the power law, and this region is the mesolayer, where it is the lower part of the overlap layer. At the upper part of the overlap layer, where the viscous force itself becomes naturally negligible, the log layer will appear due to that the acceleration force of the large-scale motions increases as the Reynolds number increases. In the core region, the velocity-defect form is satisfied with the power-law scaling.

• Applied Microscopy
• /
• 제50권
• /
• pp.27.1-27.6
• /
• 2020

Transition metal dichalcogenides (TMD), which is composed of a transition metal atom and chalcogen ion atoms, usually form vacancies based on the knock-on threshold of each atom. In particular, when electron beam is irradiated on a monolayer TMD such as MoS₂ and WS₂, S vacancies are formed preferentially, and they are aligned linearly to constitute line defects. And then, a hole is formed at the point where the successively formed line defects collide, and metal clusters are also formed at the edge of the hole. This study reports a process in which the line defects formed in a monolayer WS₂ sheet expends into holes. Here, the process in which the W cluster, which always occurs at the edge of the formed hole, goes through a uniform intermediate phase is explained based on the line defects and the formation behavior of the hole. Further investigation confirms the atomic structure of the intermediate phase using annular dark field scanning transition electron microscopy (ADF-STEM) and image simulation.

• Advances in materials Research
• /
• 제12권4호
• /
• pp.273-286
• /
• 2023

The fracture mechanics make it possible to characterize the behavior with cracking of structures using parameters quantifiable in the sense of the engineer, in particular the stress field, the size of the crack, and the resistance to cracking of the material. Any structure contains defects, whether they were introduced during the production of the part (machining or molding defects for example). The aim of this work is to determine numerically by the finite element method the stress concentration factor Kt of a plate subjected to a tensile loading containing a lateral form defect with different sizes: a semicircle of different radii, a notch with different opening angles and a crack of different lengths. The crack propagation is then determined using the extended finite element technique (X-FEM). The modeling was carried out using the ABAQUS calculation code.

• Archives of Plastic Surgery
• /
• 제36권3호
• /
• pp.289-293
• /
• 2009

Purpose: The retroauricular flap has many advantages for facial reconstruction and is being performed by many surgeons. However, it is difficult for the retroauricular flap to perform reconstruction of the upper region of the auricle and its surroundings, due to limited rotation arc and length of pedicle. We successfully reconstructed the upper region of the auricle and its surroundings with retroauricular flap by using the superior auricular artery as a supplying pedicle. The purpose of this study is to present an anatomic study about the superior auricular artery and its clinical application. Methods: We investigated the relationship between the superior auricular artery and its surrounding structures through anatomic studies with 7 fresh cadavers and then applied the findings clinically. From February to December 2008, we performed 7 cases of the superior auricular artery island flap to reconstruct the defects in patients operated on skin cancer. Sizes of the defects varied form $0.8{\times}0.8cm$ to $3.5{\times}3.0cm$. Results: We found that the superior auricular artery is a reliable pedicle for the retroauricular flap, based on anatomical studies. All wounds of the patients were successfully closed. The flap donor site was primary closed except in one patient with a large defect. The aesthetic outcomes of the donor and recipient sites were satisfying. Conclusions: The superior auricular artery island flap has several advantages. Therefore, we suggest that the superior auricular artery island flap is a treatment of choice for reconstructing soft tissue defect at the upper region of the auricle and its surrounding area.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1297-1301
• /
• 2013

This paper analyzes of PD occurrence position through an analysis of the arrival time difference between the GIS partial discharge signal. Because of GIS (Gas Insulated Switchgear) is a facility very important power equipment and as part of the equipment that make up the power system, the stabilization of the power industry, which accounted for 88.5% share of GIS substation in the form of a substation is an important equipment for power supply. In the situation where we are gradually expanding the need for preventive diagnosis in order to improve the efficiency of equipment management and failure prevention for Preventive diagnosis. In this paper as a method for extracting pre-defect of failure of GIS Apply the average value method of calculating the 5 times each using a pulse of the first time of the second pulse (${\Delta}t$) with an oscilloscope generation position PD(Partial Discharge). the results of GIS internal inspection, the partial discharge of the actual the position of the partial discharge was confirmed with an accuracy of about 82% of positions. Arrival time difference in the most effective manner if the partial discharge of GIS internal occurs by applying the averaging method and TOA(Time of arrival) method, the partial discharge occurs you through the measurement and analysis of PD signal occurs was confirmed in the experiment are presented and diagnostic methods location tracking.

• 한국결정성장학회지
• /
• 제24권6호
• /
• pp.246-251
• /
• 2014

최근 태양전지의 효율을 증가시키기 위한 연구가 많이 이루어지고 있으며, 특히 단결정 실리콘 웨이퍼의 경우 높은 효율을 낼 수 있는 소재로써 고효율 태양전지연구에 많이 이용되고 있다. 본 연구에서는 단결정으로 Czochralski(Cz)-Si 성장 시 산소농도를 다르게 하여 산소석출결함의 변화와 그에 따른 셀효율과의 관계를 비교하였다. 산소불순물은 Cz법으로 성장시킨 실리콘의 주된 불순물이다. 산소불순물 존재 시 태양전지 공정에서 산소석출결함이 생성되며 발생된 산소석출결함은 셀효율에 악영향을 미치게 된다. 그러므로 고효율 태양전지를 위한 웨이퍼를 생산하기 위한 산소석출결함 밀도와 셀효율의 상관성을 연구하였다. 또한 산소농도에 따른 산소석출결함을 분석하여 산소석출결함이 발생되지 않는 잉곳 내 산소농도 범위를 연구하여 14.5 ppma 이하에서 Bulk Micro Defect(BMD)가 발생하지 않음을 확인하였다.

• Clinics in Shoulder and Elbow
• /
• 제19권2호
• /
• pp.78-83
• /
• 2016

Background: We investigated the risk factors for the recurrence of anterior shoulder instability after arthroscopic surgery with suture anchors and the clinical outcomes after reoperation. Methods: A total of 281 patients (February 2001 to December 2012) were enrolled into our study, and postoperative subluxation and dislocation were considered as recurrence of the condition. We analyzed radiologic results and functional outcome including the American Shoulder and Elbow Surgeons Evaluation Form, the Korean Shoulder Society Score, and the Rowe scores. Results: Of the 281 patients, instability recurred in 51 patients (18.1%). Sixteen out of 51 patients (31.4%) received a reoperation. In terms of the functional outcome, we found that the intact group, comprising patients without recurrence, had a significantly better functional outcome than those in the recurrent group. The size of glenoid defect at the time of initial surgery significantly differed between intact and recurrent group (p<0.05). We found that the number of dislocations, the time from the initial presentation of symptoms to surgery, and the number of anchor points significantly differed between initial operation and revision group (p<0.05). The functional outcome after revision surgery was comparable to intact group after initial operation. Conclusions: Eighteen percent of recurrence occurred after arthroscopic instability surgery, and 5.6% received reoperation surgery. Risk factors for recurrence was the initial size of glenoid defect. In cases of revision surgery, good clinical outcomes could be achieved using additional suture anchor.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.550-554
• /
• 2013

As continued scaling becomes increasingly difficult, 3D integration has emerged as a viable solution to achieve higher bandwidths and good power efficiency. 3D integration can be defined as a technology involving the stacking of multiple processed wafers containing integrated circuits on top of each other with vertical interconnects between the wafers. This type of 3D structure can improve performance levels, enable the integration of devices with incompatible process flows, and reduce form factors. Through silicon vias (TSVs), which directly connect stacked structures die-to-die, are an enabling technology for future 3D integrated systems. TSVs filled with copper using an electro-plating method are investigated in this study. DC and pulses are used as a current source for the electro-plating process as a means of via filling. A TiN barrier and Ru seed layers are deposited by plasma-enhanced atomic layer deposition (PEALD) with thicknesses of 10 and 30 nm, respectively. All samples electroplated by the DC current showed defects, even with additives. However, the samples electroplated by the pulse current showed defect-free super-filled via structures. The optimized condition for defect-free bottom-up super-filling was established by adjusting the additive concentrations in the basic plating solution of copper sulfate. The optimized concentrations of JGB and SPS were found to be 10 and 20 ppm, respectively.

• Journal of Periodontal and Implant Science
• /
• 제36권1호
• /
• pp.195-210
• /
• 2006

The aim of this study is to evaluate the effects of combination of rhBMP-4 and chitosan, which have osteoinductive capacity, on the regeneration of bone defects in dogs. Three beagle dogs aged over one and half years and weighed about 15Kg were used in this study. Three round defects were made by trephine bur in each side of mandibles. Each defect was filled with collagen, chitosan, rhBMP-4/chitosan. The dogs were sacrificed at 1, 3 or 8 weeks postsurgery and the results were evaluated histologically. The results of this study were as follows: 1. The sign of new bone formation, rearrangement of osteoblasts was revealed adjacent of preexisted bone or around graft materials such as chitosan. 2. The descending order of groups in bone regeneration speed was the rhBMP-4/chitosan group, chitosan group, collagen group. In the combination group, new bone was regenerated more and in better quality than others. 3. The regeneration of bone was observed in the rhBMP-4/chitosan group in 3 weeks after surgery. In 8 weeks after surgery, bone regeneration was observed in all three groups, and new bone at 8th week was denser in the chitosan and rhBMP-4/chitosan group than collagen group. In conclusion, rhBMP-4 and chitosan can be applied in the bone regeneration procedures usefully. It is considered that chitosan can be a splint for the maintenance of the defect form and produce much better effect when used with good grafting material or bone morphogenetic protein.