• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.363-371
• /
• 2021

Forest operations like timber harvesting have already been mechanized to reduce hazards to the worker and increase productivity. However, timber harvesting operations have still been considered potentially dangerous and expensive on steep terrain. Teleoperation, to control the timber harvesting machine at a distance, has the potential to improve the safety, productivity and efficiency of harvesting operations on steep terrain. To verify the effects of teleoperation, an experimental prototype system of a monitor image-based teleoperation was constructed using a real forestry machine. In this study, the productivity of excavator based grapple loader, which is one of the most used mechanized harvesting equipment in the timber production, was analyzed using time-study method. Factors like skill and age of operators, influencing loader productivity in timber loading operation were also evaluated by statistical analysis. Productivity analysis results showed that less experienced operators were more productive than experienced operators for teleoperation through image of monitors in the operator cabin. These results are shown to be unfamiliar to the monitor image and different loading operation pattern by operators. According to the results, the monitor image-based teleoperation system of forestry machine need to improve the resolution and installation position of camera. It was expected that additional studies will be needed for real-time remote control of forestry machine in the future.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.271-281
• /
• 2021

Pinus densiflora and Larix kaempferi forests not only extended the plantation management area but also cultivated to the sustainable wood supply chain during the last 5-years. These prescriptions are primarily done by manual operation activities, particularly in young tree tending. Two types of tending activities, brashing by brush cutter(BB) and pruning by pruning shear and saw(PP), were selected for the investigate of musculoskeletal disorders' level and postural risks using Ovako Working Posture Analysis System (OWAS). The postural risk indexes (BB and PP) ranged from 115 to 125 and 102 to 105, respectively. There is no significant difference between the species. The young tree tending operations had low postural risks. The results may be used as basic data to develop technical guideline for safe young trees.

• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.217-229
• /
• 2023

Forest projects often apply construction industry labor rates, without considering the demanding work conditions and labor intensity unique to forest operations, resulting in workplace issues. This study aims to analyze forest operations' characteristics and wage survey methods in other fields to establish a framework for surveying the wages of forest workers. The developed framework was tested through direct surveys conducted with all forest operation companies. Survey items included actual wages by occupation, identification and removal of outliers using quartile deviation, and occupation-based wage calculation. Results revealed that the appropriate wages for 2022 were as follows: KRW 163,376 for general workers, KRW 221,407 for special workers, KRW 250,045 for work leaders, and KRW 239,863 for wood cutters. These figures were 16.27% higher than those derived from the standard construction wage survey. The developed framework was validated by comparing the appropriate wages with both the standard construction wage survey and the forestry workers' wage. The results indicated that the wages calculated using the developed framework were 4.5% more similar to the forestry workers' wage compared with those from the standard construction wage survey. Consequently, the standard construction wage survey was deemed unsuitable for forest projects. To ensure efficient forest operations, it is imperative to conduct wage surveys using the developed framework over multiple years to accumulate sufficient data.

• Journal of Korean Society of Forest Science
• /
• v.106 no.3
• /
• pp.300-309
• /
• 2017

The productivity, cost, and optimal forest road network density for tree-length yarding with K301-4 and HAM300 tower yarders were analyzed. The results showed that productivity decreased as the yarding distance increased. The productivity of the K301-4 was greater than that of the HAM300 as the maximum yarding distance was longer than 34 m. This difference increased as the load volume increased. As the K301-4 yarder had a higher purchase price and it took more time to set up compared to the HAM300, the HAM300 was cost effective. Therefore, in oder to introduce tower yarders to reduce operational cost, it is effective to increase the load volume during operations and to utilize the road network repeatedly for a long period.

• Journal of Korean Society of Forest Science
• /
• v.113 no.2
• /
• pp.164-169
• /
• 2024

In South Korea, most felling operations involve the use of chainsaws due to steep and rough terrains. This felling technique is responsible for approximately 80% of all fatalities mainly due to unpredictable felling directions. Therefore, readjust monitorised felling is imperative to improve safety in different working conditions. This study examined the effect of wedging on felling direction error and productivity during felling operations. When wedging was applied, a felling direction error within 22° and a productivity of 0.63 m³/min were obtained. These results show a decrease in mean directional error and a dimish in productivity. Thus, although wedging reduces productivity, it is a necessary strategy to improve safety.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.3
• /
• pp.254-266
• /
• 2021

Using forest resources involves solving complex and diverse tasks. At the same time, one of the key goals in the field is improving the quality of forest infrastructure. This direction requires adequate mathematical and economic justification. Moreover, creating an effective infrastructure will not only increase the accessibility and usage volumes of wood and other forest resources, but also contribute to the development of continuous and sustainable forest management. The existing practice of making decisions in terms of the organizational and technological aspects of logging, based on the personal experiences of managers or leading specialists in enterprises, hinders the achievement of constant optimal efficiency. The paper presents results that are a continuation of the research cycle of the authors' team in the fields of optimization and algorithmization of various logging processes. The focus of the study lies in the processing and movement of wood resources, the most valuable products of the investigated groups of enterprises. To this end, the paper presents a developed algorithm for determining an effective technological chain of transportation in logging operations, and for improving loading and unloading processing operations under dynamic natural and production conditions. This algorithm serves as the methodological basis for designing logging infrastructure in a dynamically changing environment.

• Journal of Forest and Environmental Science
• /
• v.28 no.1
• /
• pp.30-36
• /
• 2012

The total yield of Pinus koraiensis stands was reviewed along forest function by using goal programming, which is one of the operations research techniques. The 4 kinds of management goals are set to identify timber production in the Research Forest of Kangwon National University. As a result, scenario 1 was estimated the best timber production over 2,073 ha area and also 588 ha in the third quarter was showed the most timber harvest. The rate of timber harvest was separated by 10 to 50 percent in non-timber forest function in the scenario 1 and that model was applied to the Research Forest of Kangwon National University. The structure of the area and volume is showed to be balanced quarterly when rate of timber harvest at 10 to 20 percent.

• Journal of Korean Society of Forest Science
• /
• v.82 no.1
• /
• pp.34-43
• /
• 1993

In this paper, the characteristics of cable logging operations are discussed from a standpoint of mechanics. An example of standing skyline operations is used to illustrate the mechanical principles. Using force and moment boundary conditions, the maximum allowable payload was formulated as a function of slope profile, system geometry and operation options. This formulation includes fundamental equations for log drag and single segment mechanics. The catenary link model is the basic assumption in simulating cable segment stretches. In order to demonstrate the solution procedures of the formulation, a computer model was developed. The model uses Secant algorithm to determine the solution of the complex nonlinear equation set. Finally, the computer model was demonstrated using a hypothetical data set.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.423-426
• /
• 2006

Paper has fibers and fines network structure and it is strongly affected by interface bonding between fibers. Depending on the inter-fiber bonding, paper bulk is determined. Fines play an important roll in Campbell and consolidation effect through wet pressing and drying operations. Refined Sw-BKP, Hw-BKP and BCTMP fines were used to investigate the fines effect. Wet-web strength, breaking length, scattering coefficient, and hydrodynamic specific volume were measured. According to the result of experiments, chemical and morphological compositions of fines do not strongly affect to wet-web forming, but strongly affect to drying operations which form hydrogen bonding among fiber-fines-fiber matrixes. Paper bulk should be controlled by the extent of hydrogen bonding between fibers during drying operations.

• International Journal of Reliability and Applications
• /
• v.9 no.1
• /
• pp.53-70
• /
• 2008

In this paper, we discuss the plethora of uses for the software package R, and focus specifically on its helpful applications in reliability data analyses. Examples are presented; including the R coding protocol, R code, and plots for various statistical as well as reliability analyses. We explore Kaplan-Meier estimates and maximum likelihood estimation for distributions including the Weibull. Finally, we discuss future applications of R, and usages of quantile regression in reliability.