• The Korean Journal of Ecology
• /
• v.21 no.3
• /
• pp.195-201
• /
• 1998

This study was carried out to investigate characteristic of ions in rainwater by throughfall, stemflow and rainfall at air polluted area(Kure city industrial city) and non-air polluted area (Higashihiroshima city non industrial city). pH of rainwater in air polluted area were all low as compared with those in non-air polluted area. EC of rainwater in ir polluted area were high in throughfall and stemflow, but there was no difference between both areas in rainfall. The concentration of major ions in rainwater were generally high at air polluted area, especially of $Mg^{2+}$, $Ca^{2+}$, $Cl^{-}$ and $SO_4^{2-}$ in stemflow. But there was little difference in $NH_4^{+}$, and there was also cases had a high concentration in non-air polluted area. By comparison with forest type, in stemflow concentration of ions in coniferous forest were higher than those in broad-leaved, but in throughfall they were higher in mixed forest rather than coniferous forest. There was no correlation between the amount of rainwater and pH, and also EC. $NO_4^{-}$ and $SO_{4}^{2-}$ had high correlations between major ions besides $Na^{+}$ and $NH_{4}^{+}$ in air poluted area.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.721-731
• /
• 2019

Air drying depends on species, density, dimension of wood, the geographical location of the air drying yard, and the meteorological factors of air drying site. If there are four seasons with large difference in temperature and humidity like in Korea, the research of the meteorological factors is required in air drying site. In this study, effective air drying days (EADD) of 24 regions in Korea were calculated by using the average monthly temperature, relative humidity, and wind speed. The EADD in 24 regions in Korea was ranged from 239 days to 291 days, with an average 265 days. This result is 5 days increased compared to the average of EADD calculated using the meteorological factors from 1955 to 1984. The results of multiple regression analysis on the EADD and meteorological factors showed that EADD affected in the order of temperature, relative humidity, and wind speed. As a result of dividing Korea into 4 zones of EADD, the zones of EADD were moved northward compared to previous study due to global warming. As basic data for predicting the moisture content (MC) distribution of Korean red pine logs during air drying conducted in Seoul, the average monthly temperature, relative humidity and wind speed for three years from 2016 to 2018 were presented, and the corresponding changes of the equilibrium MC were analyzed.

• Korean Journal of Environmental Biology
• /
• v.21 no.2
• /
• pp.120-125
• /
• 2003

For this study grasp coverage condition and forest stratification to various green space, observed air temperature and relative humidity. With this data, coverage condition and air temperature, relative humidity distribution, analyzed relationship of forest rate and air temperature or relative humidity, tree numbers and green volume and humidity by revolution analysis. In this result, higher none is formed artificiality and barren area, lower zone did fores and water area. Relative humidity have corresponding type of air temperature distribution. lower Tone was higher humidity. Different of Idlest type or water area, surround of forest showed relatively higher humidity. Increasing tree numbers or green volume effect higher humidity and this efficiency order of an arbor, subarbor, shrub.

• Journal of Ecology and Environment
• /
• v.41 no.12
• /
• pp.328-335
• /
• 2017

Background: Some researchers have attempted to evaluate the ecological function of various additional services, away from the main point of view on the timber production of Korean forests. However, basic data, evaluation models, or studies on the absorption of air pollutants related to major plant communities in Korea are very rare. Therefore, we evaluated the functional value of the forest ecosystem in Gongju-city. Plantation manual for air purification, supplied from the Ministry of Environment in Japan, was referred to process and method for assessment of air pollutant absorption. Results: Gross primary production was calculated about average 18.2 t/ha/year. It was a relatively low value in forests mixed with deciduous broad and evergreen coniferous compared to pure coniferous forest. Net primary production was the highest value in deciduous coniferous and was the lowest value in mixed forest with deciduous broad and evergreen broad. And the mean sequestration amount of each air pollutant per unit area per year assessed from gross primary production and concentration of gas was the highest with 75.81 kg/ha/year in $O_3$ and was 16.87 and 6.04 kg/ha/year in $NO_2$ and $SO_2$, respectively. In addition, total amounts of $CO_2$ absorption and $O_2$ production were 716,045 t $CO_2$/year and 520,760 t $O_2$/year in all forest vegetation in Gongju-city. Conclusions: In this study, we evaluated the absorption ability of air pollutant in 2014 on forest in Gongju-city area. Gongju-city has the broad mountain area about 70.3%, and area of deciduous broad leaves forest was established the broadest with 47.4% of genus Quercus. Pg was calculated about average 18.2 t/ha/year. The mean sequestration amount of each air pollutant per unit area per year assessed from Pg and $C_{gas}$ was the highest with 75.81 kg/ha/year in $O_3$ and were 16.87 and 6.04 kg/ha/year in $NO_2$ and $SO_2$, respectively. Absorption rates of $O_3$, $NO_2$, and $SO_2$ were the highest in evergreen coniferous forest about $14.87kgO_3/ha/year$, $3.30kgNO_2/ha/year$, $1.18kgSO_2/ha/year$, and the lowest were $5.95kgO_3/ha/year$, $1.32kgNO_2/ha/year$, and $0.47kgSO_2/ha/year$ in deciduous broad forest. In conclusion, it was evaluated that Japanese model is suitable for estimating air pollutants in Japan to Korean vegetation. However, in Korea, there is a very limited basic data needed to assess the ability of forests to absorption of air pollutants. In this study, the accuracy of a calculated value is not high because the basic data of trees with similar life form are used in evaluation.

• Journal of Korean Society of Forest Science
• /
• v.97 no.4
• /
• pp.423-430
• /
• 2008

Negative ion is considered as one of the forest health attributes. The overall purpose of this study was to investigate the influence of air negative ions on physiological effects. Data were collected from 12 volunteers (university students) who were randomly assigned into treatment and control groups. Subjects in treatment group were exposed to air with negative (2,001,000 ion/cc). Using pretest-posttest control group design, blood cortisol, norepinephrine, epinephrine, and cognitive function were measured. Data analysis indicated that negative ions influenced on positive effects of stress responses.

• The Korean Journal of Ecology
• /
• v.26 no.2
• /
• pp.87-89
• /
• 2003

Although a forest damage of large area due to air pollution has not yet been found in Korea, declines of Korean red pine (Pinus densiflora Sieb. et Zucc.), the most common coniferous species, have been locally reported. To evaluate the effect of air pollution and acid deposition on the forests, SO$_2$ concentration, acid load, soil pH and tree decline were monitored for 13 years from 1988 to 2001 in Namsan, Doowang and Gyebangsan with the gradient of air pollution. During the study period, annual mean SO$_2$ concentration in Namsan, Doowang and Gyebangsan were 14 ppb, 13 ppb and 6 ppb, respectively. Annual mean acid loads in Namsan and Doowang were three to four times more than that in Gyebangsan. As respected, forest surface soils in Namsan and Doowang were acidified to pH 4.1 and 4.3, whereas that in Gyebangsan showed normal value as pH 5.4. On the other hand, decline degrees of Korean red pines in Namsan and Doowang in both 1996 and 2001 were higher than those in Gyebangsan. It is reasonable that the severer tree declines in Namsan and Doowang could be closely related with the higher air pollution, acid load, and the effects (possibly Ca deficit and Al toxicity) of soil acidification.

• Journal of Forest and Environmental Science
• /
• v.32 no.3
• /
• pp.262-269
• /
• 2016

The purposes of this study are to calculate the green and dried weight using wood discs, to figure out weight change on air drying times, and to develop the model of wood disc weight change for Larix kaempferi, Pinus koraiensis, and Pinus densiflora. The variables affecting the weight change were investigated, and the pattern of weight change over time was figured out through linear models. When comparing the stem green weight calculated using wood discs in this study with the weight table of Korea Forest Service, the weight was not significantly different for L. kaempferi and P. koraiensis. On the other hand, in comparison of stem dried weight, the weight was significantly different in all of three species. In addition, various measurement factors were examined to figure out the relationship with weight change, and air drying times and disc diameter were found as significant independent variables. Finally, two linear models were developed to estimate air drying times of three species, fit statistics were significant for practical use.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.89-100
• /
• 2014

Energy consumption statistics in 2005 from the Korea Energy Management Corporation show that building energy usage was about 24.2% of total domestic energy consumption, and 64% of total building energy usage was consumed by residential buildings. Thus, about 10% of total domestic energy consumption is due to the heating of residential buildings. Building energy can be calculated by the configuration of the building envelope and the rate of infiltration (the volume of the infiltration of outdoor air and the leakage of indoor air), and by doing so, the annual energy usage for heating and cooling. Therefore, air-tightness is an important factor in building energy conservation. This investigate air infiltration and various factors that decrease it in timber frame buildings and suggest ways to improve air-tightness for several structural types. Timber frame buildings can be classified into light frame, post and beam, and log house. Post and beam includes Han-ok (a Korean traditional building). Six light frame buildings, three post and beam buildings, one Korean traditional Han-ok and a log house were selected as specimens. Blower door tests were performed following ASTM E779-03. The light frame buildings showed the highest air-tightness, followed by post and beam structures, and last, log houses.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.732-750
• /
• 2019

Air drying was carried out on 15 Korean red pine logs to provide a prediction model of the moisture content (MC) change in the wood during drying. The final MC was 17.4% after 880 days since the beginning of air drying in the summer for 6 Korean red pine logs with 68.7% initial MC. The final MC was 16.0% after 760 days since the beginning of air drying in the winter for 9 Korean red pine logs with 35.8% initial MC. A regression model with R-squared of 0.925 was obtained as a result of multiple regression analyses with initial MC, top diameter, temperature, relative humidity, and wind speed as independent variable and and MC change during air drying as dependent variable. The initial MC and top diameter, which is the characteristic of Korean red pine, have greater effect on the MC decrease during air drying compared to meteorological factors such as the temperature, relative humidity, and wind speed. Two-dimensional mass transfer analysis was performed to predict the MC distribution of Korean red pine logs during air drying. Two prediction models with different air drying days and different meteorological factors for the determination of the diffusion coefficient and surface emission coefficient were presented. The error between the different two methods ranged from 0.1 to 0.8% and the difference from the measured value ranged from 2.2 to 3.6%. By measuring the internal MC during air drying of Korean pine logs with various initial MC and diameter, and calculating the moisture transfer coefficient in wood for each meteorological condition, the error of the prediction model can be reduced.

• Journal of Environmental Science International
• /
• v.26 no.9
• /
• pp.1057-1072
• /
• 2017

In order to investigate the effect of air temperature reduction on an urban neighborhood park, air temperature data from five inside locations (forest, pine tree, lawn, brick and pergola) depending on surface types and three outside locations (Suwon, Maetan and Kwonsun) depending on urban forms were collected during the summer 2016 and compared. The forest location had the lowest mean air temperature amongst all locations sampled, though the mean difference between this and the other four locations in the park was relatively small ($0.2-0.5^{\circ}C$). In the daytime, the greatest mean difference between the forest location and the two locations exposed to direct beam solar radiation (brick and lawn) was $0.5-0.8^{\circ}C$ (Max. $1.6-2.1^{\circ}C$). In the nighttime, the mean difference between the forest location and the other four locations in the park was small, though differences between the forest location and locations with grass cover (pine tree and lawn) reached a maximum of $0.9-1.7^{\circ}C$. Comparing air temperature between sunny and shaded locations, the shaded locations showed a maximum of $1.5^{\circ}C$ lower temperature in the daytime and $0.7^{\circ}C$ higher in the nighttime. Comparing the air temperature of the forest location with those of the residential (Kwonsun) and apartment (Maetan) locations, the mean air temperature difference was $0.8-1.0^{\circ}C$, higher than those measured between the forest location and the other park locations. The temperatures measured in the forest location were mean $0.9-1.3^{\circ}C$ (Max. $2.0-3.9^{\circ}C$) lower in the daytime than for the residential and apartment locations and mean $0.4-1.0^{\circ}C$ (Max. $1.3-3.1^{\circ}C$) lower in the nighttime. During the hottest period of each month, the difference was greater than the mean monthly differences, with temperatures in the residential and apartment locations mean $1.0-1.6^{\circ}C$ higher than those measured in the forest location. The effect of air temperature reduction on sampling locations within the park and a relatively high thermal environment on the urban sampling locations was clearly evident in the daytime, and the shading effect of trees in the forest location must be most effective. In the nighttime, areas with a high sky view factor and surface types with high evapotranspiration potential (e.g. grass) showed the maximum air temperature reduction. In the urban areas outside the park, the low-rise building area, with a high sky view factor, showed high air temperature due to the effect of solar (shortwave) radiation during the daytime, while in the nighttime the area with high-rise buildings, and hence a low sky view factor, showed high air temperature due to the effect of terrestrial (longwave) radiation emitted by surrounding high-rise building surfaces. The effect of air temperature reduction on the park with a high thermal environment in the city was clearly evident in the daytime, and the shading effect of trees in the forest location must be most effective. In the nighttime, areas with high sky view factor and surface types (e.g., grass) with evapotranspiration effect showed maximum air temperature reduction. In the urban areas outside the park, the high sky view factor area (low-rise building area) showed high air temperature due to the effect of solar (shortwave) radiation during the daytime, but in the nighttime the low sky view factor area (high-rise building area) showed high air temperature due to the effect of terrestrial (longwave) radiation emitted surrounding high-rise building surfaces.