• 지질공학
• /
• 제6권3호
• /
• pp.131-136
• /
• 1996

세립화강암 시료에 개별 보정된 6개의 탐촉자를 부착하고 연필심 파괴로 급재하하여 AE/MA파를 발신 시키면서 고주파인 AE/MA파의 감쇄특성을 연구하였다. AE/MA파의 강도는 거리뿐만 아니라 발신원과 수신점의 상대적인 방위에 의하여 결정되며 Charcoal 세립화강암의 감쇄상수는 1.058이다. 이 상수는 AE/MA파으 주어진 경로에 대하여서 발신원과 수신점의 상대적인 방위에 무관하게 적용 가능한 것으로 평가된다.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.213-221
• /
• 2005

An insole type local shear force measurement system was developed and local shear stresses in the foot were measured during level walking. The shear force transducer based on the magneto-resistive principle, was a rigid 3-layer circular disc. Sensor calibrations with a specially designed calibration device showed that it provided relatively linear sensor outputs. Shear transducers were mounted on the locations of four metatarsal heads and heel in the insole. Sensor outputs were amplified, decorded in the bluetooth transmission part and then transferred to PC. In order to evaluate the developed system, both shear and plantar pressure measurements, synchronized with the three-dimensional motion analysis system, were performed on twelve young healthy male subjects, walking at their comfortable speeds. The maximum peak pressure during gait was 5.00kPa/B.W at the heel. The time when large local shear stresses were acted correlated well with the time of fast COP movements. The anteroposterior shear was dominant near the COP trajectory, but the mediolateral shear was noted away from the COP trajectory. The vector sum of shear stresses revealed a strong correlation with COP movement velocity. The present study will be helpful to select the material and to design of foot orthoses and orthopedic shoes for diabetic neuropathy or Hansen disease.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.341-354
• /
• 2003

The purpose of this study was to develop the uniaxial force plate system which is measured by the vertical force. The VGRF(vertical ground reaction force) 1.0 was composed of 2 bath digital scales, 2 indicaters, and analyzing software. This system was newly renovated to VGRF 2,0 which are 2 industrial digital scales, 2 adjustable indicators, and enforced analyzing software. Changes of the new system were as follows. First, the height of the plate was 75% lower than before. Second, sensing ability of the load cell was changed from 90 - 0.05kg to 300 - 0.1kg. Third, the speed of data processing was changed from 17 per second to 60 per second. Fourth, analyzing software was enforced to develop and calculate the data. For the test of the system, two different types(bare foot, high-heeled shoes) gait was adopted. highly skilled female walker(23yrs, height 165cm, body mass 46.8kg) participated for the experimental study. During the dynamic performance(gait analysis), the data of each load cell were very similar to the previous studies. Specifically, bare foot walking had less vertical force than high-heeled shoes. Consequently, VGRF 2.0 can sense the general dynamic movements as well as static load conditions.

• 보존과학회지
• /
• 제31권3호
• /
• pp.267-278
• /
• 2015

이 연구에서는 석조문화유산의 표면 요철도를 고려한 맞춤형 초음파 측정법을 설정하기 위해 새로운 접촉매질인 엘라스토머 커버를 개발하였다. 이 커버는 17MPa의 인장강도와 625%의 신장도를 가져 탄성력이 매우 우수하고 마모되지 않는 특징이 있다. 또한 엘라스토머 커버를 포함하여 탐촉자 및 접촉매질에 따른 7개 유형의 비교 실험 결과, 암석의 표면 거칠기는 초음파속도 감쇠에 많은 영향을 끼쳤다. 이러한 현상은 잔다듬에서 정다듬으로 갈수록, 직접전달방법보다는 간접전달방법에서 두드러졌다. 그러나 지수형 탐촉자와 엘라스토머 커버를 사용하는 유형 F는 요철도에 큰 상관없이 안정된 초음파속도와 높은 첨두치를 나타냈다. 이는 접촉매질로 사용한 엘라스토머 커버가 요철 표면에 충분히 밀착되어 탐촉자와 시편 사이의 공극을 제거했기 때문이다. 따라서 석조문화유산의 초음파 측정은 유형 F를 사용하는 것이 가장 적합할 것으로 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.376-381
• /
• 2004

A rig was constructed to test the performance characteristics and compare the hydraulic forces exerted on a centrifugal type artificial heart impeller. A conventional shaft. seal and bearing system. while driven by a small electric motor. supported the impeller which was separated from the pump casing by a six degree of freedom force transducer (JR3 Ine). Radial (x. y) and axial (z) hydraulic forces were recorded and compared. At physiological operating conditions. the results indicate that the double entry/exit centrifugal pump encounters a smaller radial force and significantly reduced axial thrust. These experimental results are valuable in the design of a magnetic bearing system to suspend the impeller of a centrifugal artificial heart pump. This experimental technique may also be applied to evaluate the required capacity and predict the lifetime of contact bearings in marine pumps.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.151-152
• /
• 2006

Nowadays, great attention has been shown to the question of ultrasonic linear motor for accomplishing the high positioning accuracy and high driving force in the semiconductor and optical industry. Ultrasonic linear motors have many advantages such as simple structure, quick response, ability to maintain position without energy consumption, and electromagnetic effect. And BLT has attracted attention to accomplish large vibration amplitude and large mechanical force. Authors designed and developed the new type of ultra sonic linear motor with multi support mechanism, achieved 75N of output force and 0.45m/s of velocity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1062-1065
• /
• 2002

We have evaluated the ability of a time-delayed artificial neural network (TDANN) to predict muscle forces using only eletromyographic(EMG) signals. To achieve this goal, tendon forces and EMG signals were measured simultaneously in the gastrocnemius muscle of a dog while walking on a motor-driven treadmill. Direct measurements of tendon forces were performed using an implantable force transducer and EMG signals were recorded using surface electrodes. Under dynamic conditions, the relationship between muscle force and EMG signal is nonlinear and time-dependent. Thus, we adopted EMG amplitude estimation with adaptive smoothing window length. This approach improved the prediction ability of muscle force in the TDANN training. The experimental results indicated that dynamic tendon forces from EMG signals could be predicted using the TDANN, in vivo.

• 비파괴검사학회지
• /
• 제18권1호
• /
• pp.33-41
• /
• 1998

유리모세관의 파괴시에 방출되는 탄성파를 이용하여 유리평판의 진앙점에 위치한 PZT변환기의 응답특성을 연구하였다. PZT변환기는 일정한 면적을 가지고 두께가 다른 PZT 세라믹 (Edo사의 EC-65)을 사용하여 제작하였다. 공기 경계층을 갖는 유리평판에서 힘의 크기가 1 N이고 상승시간이 280ns인 경사 점하중이 인가된 경우에 대하여 진앙점에서 수직 성분의 변위와 속도를 이론적으로 계산하였다. PZT변환기의 과도응답은 이론적으로 계산된 수직 성분의 속도가 입사하여 PZT세라믹의 전극과 만날 때 펄스형태로 나타난다고 생각할 수 있다. PZT변환기의 응답은 PZT세라믹의 직경 대 두께의 비가 약 0.33 이하인 경우에는 두께진동모드에만 의존하고, 그 이상의 경우에는 두께진동모드와 다른 저주파수의 진동 모드의 중첩에 의해서 일어난다고 생각된다. 첫 펄스의 반폭치시간은 인가된 파괴하중과 PZT변환기의 공진주파수에 무관하게 약 280ns로서 일정하였고, 음향방출 발생원의 상승시간으로 생각할 수 있었다. 첫 펄스의 최대진폭은 PZT변환기에 입사하는 수직 성분의 속도와 PZT세라믹의 축전용량에 비례하였다. 그러므로, 동일한 PZT변환기에 대하여 음향방출 발생원의 상승시간과 크기는 첫 펄스의 반폭치시간과 최대 진폭으로 평가할 수 있다.

• 센서학회지
• /
• 제18권4호
• /
• pp.286-293
• /
• 2009

The implantable middle ear hearing devices(IMEHDs) have been developed to overcome the conventional hearing aid's problem(ringing effect caused by the acoustic feedback, cosmetic problem, etc.). In the IMEHDs, the vibrating transducer is a key component because its vibration enables to hear for hearing impaired people. The vibrating transducer is implanted on ossicular chain by surgical operation. The coupling status between implanted transducer and ossicular chain has an effect on delivering vibrating force from transducer to stapes. Noninvasive method is required to investigate the output characteristics of IMEHDs after implementation. Recently, emitted sound pressure measuring method of tympanic membrane is proposed to investigate the output characteristics of IMEHDs. However, the relationship between displacement of stapes and sound pressure by tympanic membrane was not cleared. In this paper, displacement of stapes and sound pressure by tympanic membrane were measured using the differential floating mass transducer(DFMT) that implanted on the ossicular chain of the human temporal bone and physical ear model. Through the experiments results, the relationship between displacement of stapes and sound pressure by tympanic membrane was investigated.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.71-75
• /
• 1998

This study deals with the friction weldability of A7075-T6 having high specific strength. The friction welding conditions used are rotation speed 2000rpm, friction pressure 40MPa, friction time 1.5sec, upset pressure 40~100MPa, upset time 5sec. First, upset length was measured by displacement transducer. The plastic flow in 7075-T6 weld generates convex lens shaped resion by friction and concave lens shaped resion by axial force. Under the condition of upset pressure 85MPa, the friction welds have tensile strength of 552MPa and shear strength of 262MPa.