• 연구논문집
• /
• s.25
• /
• pp.185-192
• /
• 1995

The solid/liquid interface migration in Nb-doped $SrTiO_3$ and its effect on dielectric properties have been investigated. The specimen sintered in air shows no migration during oxide infiltration treatment in air, whereas the specimen sintered in $5H_2-95N_2$ shows appreciable migration during similar infiltration. In the migrated layers of the specimen sintered in a reducing atmosphere, no cations of the infiltrants are detected by wavelength dispersive spectroscopy. These results show that nonstoichiometry due to the atmosphere change can induce the interface migration as in the case of frequently observed migrations due to solute concentration change. The driving force for the migration is discussed in terms of the coherency strain energy in a thin diffusional oxidized layer of the receding grain. The interface migration caused by nonstoichiometry could be suppressed by preoxidizing grain surfaces before oxide infiltration treatment. The suppression of migration increased the effective dielectric constant of the material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.252-252
• /
• 2010

AIZTO (Al-In-Sn-ZnO) thin film was deposited on glass substrate at room temperature by facing target sputtering (FTS) system. The FTS system was designed to array two targets facing each other. Two different kinds of targets were installed on FTS system. We used the ITO (In2O3 90wt%, SnO2 10wt%) target and the AZO (ZnO 98wt%, Al2O3 2wt%). AIZTO films were deposited in each of the applied power of the targets. The electrical and structural properties of the as-deposited AIZTO thin films were then examined by hall-effect measurement, and by using atomic force microscope (AFM), X-ray diffractometer (XRD), and energy dispersive x-ray spectroscopy (EDX). The optical property was measured by an UV-VIS spectrometer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.71-71
• /
• 2010

Copper oxide thin films were deposited on the p-type Si(100) by r.f. magnetron sputtering as a function of different substrate temperature. The deposited copper oxide thin films were investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), spectroscopic ellipsometry (SE), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The SEM and SE data show that the thickness of the copper oxide films was about 170 nm. AFM images show that the surface roughness of copper oxide films was increased with increasing substrate temperature. As the substrate temperature increased, monoclinic CuO (111) peak appeared and the crystal size decreased while the monoclinic CuO (-111) peak was independent on the substrate temperature. The oxidation states of Cu 2p and O 1s resulted from XPS were not affected on the substrate temperature. The contact angle measurement was also studied and indicated that the surface of copper oxide thin films deposited high temperature has more hydrophobic surface than that of deposited at low temperature.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.366-370
• /
• 2014

ZnO:Al transparent conductive films were deposited on glass substrates by RF magnetron sputtering technique and annealed by rapid thermal annealing system. The influence of annealing time on the structural, electrical, and optical properties of ZnO:Al thin films was investigated by atomic force microscopy, X-ray diffraction, Hall method and optical transmission spectroscopy. As the annealing time increases from 0 to 5 min, the crystallinity is improved, the root main square surface roughness is decreased and the sheet resistance is decreased. The lowest sheet resistance of ZnO:Al thin film is 90 ohm/sq. The reduction of sheet resistance is caused by increasing carrier concentration due to substituent Al ion. All films are transparent up to 80% in the visible wavelength range and the adsorption edge is a blue-shift due to Burstein-Moss effect with increasing annealing time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.188.2-188.2
• /
• 2014

Chemical vapor deposition (CVD) method is usually used to grow high-quality large area graphene. In the CVD process, copper is an especially important catalytic-substrate due to the fact that graphene films grown on Cu foils are predominantly one monolayer thick. In this study, we has grown graphene on several types of copper substrates: Cu foils and copper single crystal surfaces such as Cu(100) and Cu(111) are chosen. To investigate the differences between graphene grown on foils and single crystals, we use Raman spectroscopy, X-ray diffraction and atomic force microscopy. Details of the experimental results will be presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.392.1-392.1
• /
• 2014

Isoindigo based small molecules have attracted much attention in the field of optoelectronic devices due to their broad absorbance and high charge carrier mobilitiies. Herein, we investigate the field effect transistor characteristics of a series of isoindigo based donor-acceptor-donor (D-A-D) small molecules containing a variable number of thiophene moieties (named IDT, ID2T, and ID3T) which form pi-bridges between the D and A moieites and a different donor moiety (IDED). In order to improve the carrier mobility, 1-chloronaphthalene (CN) and 1,8-diiodooctane (DIO) as solvent additives were used. The film morphology, crystallinity and optical properties of the materials processed with various concentrations of solvent additives were investigated through atomic force microscopy (AFM), X-ray diffraction (XRD) and UV-vis absorption spectroscopy.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.48.1-48.1
• /
• 2010

Cu has been used for metallic interconnects in ULSI applications because of its lower resistivity according to the scaling down of semiconductor devices. The resistivity of Cu lines will affect the RC delay and will limit signal propagation in integrated circuits. In this study, we investigated the characteristics of electroplated Cu films according to the variation of concentration of organic additives. The plating electrolyte composed of $CuSO_4{\cdot}5H_2O$, $H_2SO_4$ and HCl, was fixed. The sheet resistance was measured with a four-point probe and the material properties were investigated with XRD (X-ray Diffraction), AFM (Atomic Force Microscope), FE-SEM (Field Emission Scanning Electron Microscope) and XPS (X-ray Photoelectron Spectroscopy). From these experimental results, we found that the organic additives play an important role in formation of Cu film with lower resistivity by EPD.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.437-440
• /
• 2002

Characteristics of holographic polymer dispersed liquid crystal(HPDLC) were studied according to various matrix materials to improve the electro-optic properties. Various types of polyurethane acrylates (PUAs) have been designed and synthesized. The morphologies of these gratings were measured by atomic force microscopy(AFM) and electro-optic properties were obtained with UV-visible spectroscopy. Real time measurements of grating fabrication have been obtained according to PUA structures. High reflection efficiency was obtained by modifying the molecular structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.19-27
• /
• 2003

Morphology and composition of MgO films grown on single-crystalline diamond (100) have been studied. MgO thin films were deposited in the substrate temperature range from room temperature (RT) to 723K by means of electron beam evaporation using MgO powder source. Atomic force microscopy images indicated that the film grown at RT without $O_2$ supply was relatively uniform and flat whereas that deposited in oxygen ambient yielded higher growth rates and rough surface morphologies. X-ray photoelectron spectroscopy analyses demonstrate that the MgO film deposited at RT without $O_2$ has the closest composition to the stoichiometric MgO, and that a thin contaminant layer composed mainly of magnesium peroxide (before etching) or hydroxide (after etching) was unintentionally formed on the film surface, respectively. These results will be discussed in relation to the interaction among the evaporated species and intentionally supplied oxygen molecules at the growth front as well as the interfacial energy between diamond and MgO.

• Applied Science and Convergence Technology
• /
• v.25 no.2
• /
• pp.28-31
• /
• 2016

The structural and the electronic properties of pentacene on modified Si (001) were investigated using scanning tunneling microscopy (STM), atomic force microscopy (AFM) and ultraviolet photoelectron spectroscopy (UPS). Dodecane was used to modify Si (001) substrates and then pentacene was deposited on dodecane/Si (001). Our STM results show a uniform distribution of aggregated dodecane molecules all over the clean Si (001). The surface structure of pentacene on dodecaene/Si (001) examined by AFM is analogous to that of pentacene on $SiO_2$. The UPS data showed that the work function of pentacene on clean Si (001) and pentacene on modified Si (001) with dodecane was 6.41 and 5.57 eV, respectively. Our results prove that dodecane results in the work function difference between pentacene on clean Si (001) and pentacene on dodecane/Si (001).