• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.17-32
• /
• 2002

The purpose of this study was to find the rational method to analyze golf swing with specific property of club shaft. Three subjects were filmed by two high speed digital cameras with 500 fps. The phase analyzed was downswing of each subject. The three-dimensional coordinates of the anatomical landmarks were obtained with motion analysis system Kwon3d 3.0 version and smoothed by lowpass digital filter with cutoff frequency 6Hz. From these data, kinematic and kinetic variables were calculated using Matlab(ver 5.0) The variables for this study were angular velocity and accelerations, which were calculated and following conclusions have been made : 1) Golf swing time of stiff club is faster than that of regular club. 2) In shoulder joint motion of swing with the stiff club, x-stiff showed mort rapid negative acceleration than that of regular club. 3) In regular club, the velocity of club head would be more effective velocity, which was increasing, than those of other clubs before impact. 4) In wrist joint motion of swing with stiff club, x-stiff club showed faster than regular club in the downswing and impact more rapid negative acceleration.

• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.190-199
• /
• 2003

This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

• Women's Health Nursing
• /
• v.2 no.1
• /
• pp.53-67
• /
• 1996

A total health state evaluation of Korean female elderlies was made by using the questionary scheme measuring the physical, mental and social functions of the elderlies, in order to investigate the critical factors for the health maintenance of female elderlies and to develop their preventive nursing program. A total of 280 subjects over 65 years old living in Seoul and the suburban area were selected and interviewed during the period of September and October in 1995. The materials collected were analyzed statistically by using SAS data processing program, and the results and recommendations are summarized as follows. 1. The physical health state of Korean elderly women was evaluated to be satisfactory by showing an average score of 3.722 in 5.0 full-score scale. But this score was lower than those evaluated for the elderlies combined both sexes(4.054). The mental health state of the subjects was also evaluated as high scoring 3.484, possibly due to the fact that 78% of the subjects lived together with their children's family. On the other hand, the social health state of the subjects was relatively low scoring 2.585, mainly due to that 80% of them was widows which was resulted by the 6-7 years longer life-expectancy of Korean women. 2. A significant differences in the physical health state scores between different age groups was observed, indicating the rapid ageing process occurring in this age group. The family structure was appeared to be an important factor influencing the physical health state of the female elderlies ; the physical health score of the women with her husband only was higher than that of those living with children's families, and the lowest score was obtained from those living alone. 3. The age was the most important factor determining the mental health state of the subjects, while the religion, educational status, marriage state and family structure did not significantly influenced the mental health state of the aged women. 4. The social health state of the subject was deeply influenced by the marriage state and family structure, showing significantly lower scores with widowers compared to the married couples. Those living with their married spouse only obtained the highest social health score, while those living along showed the lowest score. The parent and grandparentship of those living with their children and the religion, especially Catholic and Protestant, had positive influence on the social health state of the aged women. 5. The mental health state of aged women showed significant correlation with the factors determining the physical health, except for digestive system related ability and sexual ability and the highest extra home ability. 6. The mental health state of aged women showed significant correlation with the factors determining social health, especially with the parent and grandparentship and the family relative's role. From these results, the following recommendations are made. 1. Since the physical, mental and social health states of aged people are deeply influenced by the sex and the average values of the both sex can create misleading figures, the health evaluation of the elderlies should be made separately by sex. 2. Since the health state of aged women is highly influenced by their family structure, the spouse's role and living with married couple only should be emphasized in respect of preventive health care. 3. The social activity programs and grandparentship teaching programs should be prepared in the nursing care program for aged people.

• Journal of the Korean earth science society
• /
• v.22 no.5
• /
• pp.360-376
• /
• 2001

This qualitative research investigated in-service science teachers' perceptions about cooperative learning and their perceived barriers in implementing cooperative learning in their classrooms. The underlying premise for cooperative learning is founded in constructivist epistemology. Cooperative learning (CL) is presented as an alternative frame to the current educational system which emphasizes content memorization and individual student performance through competition. An in-depth interview was conducted with 18 in-service science teachers who enrolled in the first-class teacher certification program during 2001 summer vacation. These secondary school teachers's interview data were analyzed and categorized into three areas: teachers' definition of cooperative learning, issues with implementing cooperative learning in classrooms, and teachers' and students' responses towards cooperative learning. Each of these areas are further subdivided into 10 themes: teachers' perceived meaning of cooperative learning, the importance of talk in learning, when to use cooperative learning, how to end a cooperative class, how to group students for cooperative learning, obstacles to implementing cooperative learning, students' reactions to cooperative learning, teachers' reasons for choosing (not choosing) student-centered approaches to learning/teaching, characteristics of teachers who use cooperative learning methods, and teachers' reasons for resisting cooperative learning. Detailed descriptions of the teachers' responses and discussion on each category are provided. For the development and implementation of CL in more classrooms, there should be changes and supports in the following five areas: (1) teachers have to examine their pedagogical beliefs toward constructivist perspectives, (2) teacher (re)education programs have to provide teachers with cooperative learning opportunities in methods courses, (3) students' understanding of their changed roles (4) supports in light of curriculum materials and instructional resources, (5) supports in terms of facilities and administrators. It's important to remember that cooperative learning is not a panacea for all instructional problems. It's only one way of teaching and learning, useful for specific kinds of teaching goals and especially relevant for classrooms with a wide mix of student academic skills. Suggestions for further research are also provided.

• 대한공업교육학회지
• /
• v.32 no.1
• /
• pp.153-171
• /
• 2007

The purpose of this research was to investigate the degree of perceptional change of career education through overseas training of specialized high school teachers who take the leading role in applying Korean vocational education to reality. To accomplish this purpose, the following method were employed: 25 specialized department teachers of Keyngido educational institute who visited career education institute in USA and Canada were selected, and pretest and posttest were taken. Collected data were analyzed by Windows Korean version SPSS 14.0. M, SD, t-test and significant level p<.05 were employed for statistical analysis. The result of this research was as follows: There was significant difference in the degree of perceptional change of vocational education by overseas training of specialized high school teachers. But There was no significant differences in the management of vocational education curriculum(${\alpha}=.327$), reinforcement of preparatory training for technique contest(${\alpha}=.327$) in the statistical significant level(p<.05). The perception level of the trainees varied respectively in these domains. And means of posttest were relatively low in the comparison with those of pretest in the domains of visit of educational institute, educational facilities, scholarship and financial support, and reinforcement of preparatory training for technique contest. It is attributed to the Korea's uniqueness of culture, emotion, school system, educational facilities and financial support different from U.S.A. and Canada. The vocational education program of vocational education training institute in U.S.A. and Canada is mainly composed of industrial department, so there was no statistical significant difference(p<.05) in some questions taken by subjects of agricultural and commercial department. In conclusion, The overseas training program is very helpful for the perceptional change of vocational education and it is desirable to be expanded continuously.

• Journal of Nutrition and Health
• /
• v.36 no.9
• /
• pp.898-907
• /
• 2003

Antioxidative function of uncooked powdered food (Sangsik) was evaluated in rats consuming nutritionally unbalanced diet including 1％ cholesterol, high proportion of animal lipids (lard : soybean oil : 8 . 2) , sub-optimal levels of vitamin and mineral mixture along with 0.5% ethanol in drinking water. The uncooked powdered food tested in the present study was a mixture composed of 42 kinds of plant foods (cereals, legumes, seaweeds, vegetables, and fruits) supplemented with vitamins and minerals, and dietary fiber. Control rats were fed the semi-purified diet based on the AIN-93G composition, and nutritionally unbalanced rats were divided into 3 groups, and fed one of the following diets with 0.5% ethanol in drinking water for 5 weeks : unbalanced control diet (UC) ,20% Sangsik powder supplemented diet (S20), and 40% Sangsik powder supplemented diet (S40) . Food efficiency ratio was significantly higher in rats fed S40 compared to the value for rats fed UC (p < 0.05). Hepatic level of thiobarbituric acid reactive substances (TBARS) was significantly lower in rats fed UC compared to that for control rats (p < 0.05) , and was not influenced by dietary supplementation of the Sangsik powder. Hepatic superoxide dismutase (SOD) activity was significantly higher in rats fed UC compared to that for control rats (p < 0.05) , and significantly reduced in rats fed S20 or S40 compared to the value for unbalanced control rats. Feeding unbalanced control diet significantly reduced the ratio of hepatic GSH-Px ＋ catalase/SOD activities compared to the value for control rats, and this decrease in the ratio of antioxidant enzyme activities was reversed by adding the Sangsik powder to the diet at 20% (p <0.05) . Based on the results of antioxidant enzyme activities, feeding uncooked powdered diet appears to provide a favorable environment for body's antioxidative defense mechanism. Serum levels of Fe and Cu were significantly lower in rats fed the Sangsik powder supplemented diets compared to the value for unbalanced control rats (p < 0.05) , and levels of Se, Mn, and Zn were also tended to be decreased by dietary supplementation of the Sangsik powder. These results postulate the possibility that ingredients used in the uncooked powdered food may decrease the bioavailability of trace elements in rats.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.5
• /
• pp.44-58
• /
• 2018

Cities face new challenges not only in natural disasters by climate change but also in social and economic fluctuations. With the existing simple reconstruction method, it is difficult to solve the overall problems that a city or region may face. As a new approach to cope with various changes, the concept of resilience is emerging. Resilience is also one of the themes of recent major urban design projects. Design with the concept of resilience is a new strategy that can deal with various changes of urban space, rather than a temporary trend. The purpose of this paper is to explore the design method by analyzing cases where the concept of resilience is employed. We aim to examine what kind of design strategies are needed for the resilience design and how this design process differ in character, as compared to general design projects. Cases for this study include the "Rebuild by Design" competition held in 2013 and the "Resilient by Design/Bay Area Challenge" competition held in 2017. This paper consists of literature reviews and case studies. The latter is divided into two aspects: content analysis based on the theory of resilience and characteristics of the design process. Cases are analyzed through literature reviews and process characteristics of resilience design in response to the general design process. The main categories for urban resilience used as the framework for analysis include: Urban Infrastructure, Social Dynamics, Economic Dynamics, Health and Wellbeing, Governance Networks, and Planning and Institutions. As a result, the aspects of resilience concepts considered and design strategies undertaken by each team were identified. Each team tried to connect all 6 categories to their design strategies, placing special value on the role of governance, a system that enables collaborative design and project persistency. In terms of the design process, the following characteristics were found: planning the whole project process in the pre-project phase, analyzing predictable socioeconomic risk factors in addition to physical vulnerabilities, aiming for landscape-oriented integrated design, and sustainable implementation strategies with specific operations and budget plans. This paper is meaningful to connect the concept of resilience, which has been discussed in various articles, to design strategy, and to explore the possibility of constructing a practical methodology by deriving the characteristics of the resilience design process. It remains a future task to research design strategies that apply the concept of resilience to various types of urban spaces, in addition to areas that are vulnerable to disasters.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.4
• /
• pp.231-244
• /
• 2020

With the rapid progress of the 4th industrial revolution, technical human capitals are considered to be the core competing factors of the enterprise. Technical manpower training of the 4th industrial revolution through technical education has become an essential task of venture start-ups. The opening of technical training courses and the education support system of companies are increasing, but the shortage of technical manpower is getting worse. This study was conducted to analyze the factors affecting participation intention of the 4th industrial revolution technology education. The research model was established based on the model of goal-directed behavior. For the analysis, 250 valid questionnaire data were used to test with a structural equation model. The results of the study are as follows. First, attitude had a positive effect on the intention to participate in education. Second, subjective norms had a positive effect on the intention to participate in education. Third, the perceived behavioral control has not been tested for a significant influence on educational participation intention. Fourth, positive and negative anticipated emotions had a significant effect on educational intention. The impact of significant variables were found in the order of positive anticipated emotions, attitudes, negative anticipated emotions, subjective norms. On the other hand, as a result of testing the mediating effect of desires, it was found that desires plays a mediating role between attitude, subjective norm, perceived behavioral control, positive anticipated emotions, negative anticipated emotions, and participation intention. In particular, the causal relationship between perceived behavioral control and intention to participate in education was not significant, but perceived behavioral control had a significant effect(full mediation) on participation intention through desires. Based on the results of this study, the following implication were suggested. First, the model of goal-directed behavior(MGB) was applied to the technical education field. Second, the direct relationship between antecedent variables and behavioral intentions was simultaneously tested. Third, unlike the existing education-related research, the factors affecting participation in education were analyzed. Fourth, the importance of desires for education were suggested.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.49-67
• /
• 2013

The purpose of this study is to analyze the external systems and the units 'problem solving and invention' of the middle school technology and home economics 1 textbooks of the revised 2011 national curriculum in an effort to provide some information on the content system of invention education in technology class, as invention education was provided as part of a regular subject for the first time. The findings of the study were as follows: First, 'Technology and Inventions' chapter of Technology and Home Economics 1 Textbooks occupied 10-18% share, with the subchapter of 'Problem Solving and Invention' unit taking up 6.7-29% of the textbooks. Second, for most textbooks, 'Technological Problem Solving', 'Idea Generation' 'Multi-dimensional Projection Method', 'Expansive Thought-Processing Methodology', 'Converging Thought Methodology' and 'Invention in Everyday Lives' were included as main contents based on the accomplishment criteria presented in education process interpretation documents. Third, the detailed structures were generally made up as follows: Introduction (Broad Chapter Title, Subchapter Table of Contents, Introduction, Subchapter Title, Study Objectives, Open Thinking); Development (Unit Title, Thinking Ahead, Core Terms, Main Text, Study Helper, Activities, Research Exercises, Supplemental Readings, In-depth Study Topics, Technology in Everyday Lives, Reading Topics, Discussion Topics, and Career Helpers); and Summary (Subchapter Summary, Study Summary, Terms Summary, Writing Follow-up, Self Review, Broad Chapter Evaluation). Fourth, based on the analysis of figures included, photographs had the largest share, followed by figures, tables, and graphs. The photos were used to illustrate various inventions, invention methodologies, and exercise activities, while figures were included to depict the contents included in the main text, and the tables to assist to preparation of process diagrams or materials lists. Fifth, based on the analysis of content weights, greater weights were placed on 'Inventions and Thoughts', and 'Invention Experiment Activities,' while 'Understanding Inventions' and 'Invention and Patents' chapters did not have a lot of texts involved. Sixth, based on the analysis of content presentation methods, most textbooks combined figures, tables, illustrations and texts to discuss the topics. Based on the above study results, we suggest the following: First, a consistent education curriculum should be developed over the topic of invention; and second, more precise and systematic analysis of textbooks would need to be performed.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.113-119
• /
• 2010

Software for GafChromic EBT2 film dosimetry was developed in this study. The software provides film calibration functions based on color channels, which are categorized depending on the colors red, green, blue, and gray. Evaluations of the correction effects for light scattering of a flat-bed scanner and thickness differences of the active layer are available. Dosimetric results from EBT2 films can be compared with those from the treatment planning system ECLIPSE or the two-dimensional ionization chamber array MatriXX. Dose verification using EBT2 films is implemented by carrying out the following procedures: file import, noise filtering, background correction and active layer correction, dose calculation, and evaluation. The relative and absolute background corrections are selectively applied. The calibration results and fitting equation for the sensitometric curve are exported to files. After two different types of dose matrixes are aligned through the interpolation of spatial pixel spacing, interactive translation, and rotation, profiles and isodose curves are compared. In addition, the gamma index and gamma histogram are analyzed according to the determined criteria of distance-to-agreement and dose difference. The performance evaluations were achieved by dose verification in the $60^{\circ}$-enhanced dynamic wedged field and intensity-modulated (IM) beams for prostate cancer. All pass ratios for the two types of tests showed more than 99% in the evaluation, and a gamma histogram with 3 mm and 3% criteria was used. The software was developed for use in routine periodic quality assurance and complex IM beam verification. It can also be used as a dedicated radiochromic film software tool for analyzing dose distribution.