• Journal of Hospice and Palliative Care
• /
• v.13 no.3
• /
• pp.181-189
• /
• 2010

Purpose: Recently, health policy making is increasingly based on evidence. Therefore, Korean Terminal Cancer Patient Information System (KTCPIS) was developed to meet such need. We aimed to report its developmental process and statistics from 6 months data. Methods: Items for KTCPIS were developed through the consultation with practitioners. E-Velos web-based clinical trial management system was used as a technical platform. Data were collected for patients who were registered to 34 inpatient palliative care services, designated by Ministry of Health, Welfare, and Family Affairs, from $1^{st}$ of January to $30^{th}$ of June in 2009. Descriptive statistics were used for the analysis. Results: From the nationally representative set of 2,940 patients, we obtained the following results. Mean age was $64.8{\pm}12.9$ years, and 56.6% were male. Lung cancer (18.0%) was most common diagnosis. Only 50.3% of patients received the confirmation of terminal diagnosis by two or more physicians, and 69.7% had an insight of terminal diagnosis at the time of admission. About half of patients were admitted to the units on their own without any formal referral. Average and worst pain scores were significantly reduced after 1 week when compared to those at the time of admission. 73.4% faced death in the units, and home-discharge comprised only 13.3%. Mean length of stay per admission was $20.2{\pm}21.2$ days, with median value of 13. Conclusion: Nationally representative data on the characteristics of patients and their caregiver, and current practice of service delivery in palliative care units were obtained through the operation of KTCPIS.

• Journal of Bio-Environment Control
• /
• v.12 no.3
• /
• pp.152-159
• /
• 2003

This study was conducted to analyze the water consumption in closed transplants production system (CTPS) for the production of quality transplants and to investigate the effect of relative humidity on the water balance in CTPS. Potato (Solanum tuberosum L. cv. Dejima) plug seedlings were grown for 15 days at air temperature of 20$^{\circ}C$, relative humidity of 70%, photoperiod of 16/8 h, and photosynthetic photon flux (PPF) of 200 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-l}$ following rooting for 5 days in CTPS. Amount of humidified, dehumidified, irrigated and evapotranspirated water were 67.9 kg${\cdot}m^{-2},\;196.9{\cdot}m^{-2},\;44.3\;kg{\cdot}m^{-2},\;33.5\;kg{\cdot}m^{-2}$, respectively. Water content of media and plants were 1.2 kg${\cdot}m^{-2},\;6.9\;kg{\cdot}m^{-2}$, respectively. Three relative humidity levels of 60, 70, and 80% were provided to analyze the effect of humidity on the water balance in CTPS. Amount of humidified, dehumidified, irrigated, evapotranspiratad water and water contents of media and plants increased with increasing relative humidity. Since the water consumption required to produce plug seedlings in CTPS dec1eased with decreasing relative humidity, the available water utilization efficiency of CTPS increased with decreasing relative humidity. CTPS showed high available water utilization efficiency of 0.92 - 0.97 if dehumidified water in CTPS was recycled. The development of CTPS with recycling system of dehumidified water will not only reduce the water consuming for the production of transplants but contribute to the establishment of plant production economizing in water consumption.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.179-195
• /
• 2010

In the internal connection system, the loading transfer mechanism within the inner surface of the implant and also the stress distribution occuring to the mandible can be changed according to the abutment form. Therefore it is thought to be imperative to study the difference of the stress distribution occuring at the mandible according to the abutment form. The purpose of this study was to assess the loading distributing characteristics of three different abutments for GS II$^{(R)}$ implant fixture(Osstem, Korea) under vertical and inclined loading using finite element analysis. Three finite element models were designed according to three abutments; 2-piece Transfer$^{TM}$ abutment made of pure titanium(GST), 2-piece GoldCast$^{TM}$ abutment made of gold alloy(GSG), 3-piece Convertible$^{TM}$ abutment with external connection(GSC). This study simulated loads of 100N in a vertical direction on the central pit(load 1), on the buccal cusp tip(load 2) and $30^{\circ}$ inward inclined direction on the central pit(load 3), and on the buccal cusp tip(load 4). The following results were obtained. 1. Without regard to the loading condition, greater stress was concentrated at the cortical bone contacting the upper part of the implant fixture and lower stress was taken at the cancellous bone. 2. When off-axis loading was applied, high stress concentration observed in cervical area. 3. GSG showed even stress distribution in crown, abutment and fixture. GST showed high stress concentration in fixture and abutment screw. GSC showed high stress concentration in fixture and abutment. 4. Maximum von Mises stress in the surrounding bone had no difference among three abutment type. In GS II$^{(R)}$ conical implant system, different stress distribution pattern was showed according to the abutment type and the stress-induced pattern at the supporting bone according to the abutment type had no difference among them.

• Journal of dental hygiene science
• /
• v.17 no.6
• /
• pp.463-471
• /
• 2017

The purpose of this study was to examine the causes of career interruptions among dental hygienists, institutional measures required for their long service and ways of creating a stable employment culture for them in determine how to resolve labor shortage, create stable jobs, and step up the reemployment of idle manpower. In addition, the following suggestions are made for the establishment of a stable employment culture for dental hygienists by analyzing related literature, research materials, and information such as forums for establishing appropriate jobs for female dental workers. First, a system should be set up to prevent career interruption among dental hygienists. The work environment should be improved to prevent career breaks, and the wages, working hours, and working style should be efficiently structured to maintain the tenure of employees. Second, a plan should be devised to make use of idle manpower, and a variety of necessary programs should be developed. With respect to regular working hours, the time conversion system should be used, which reduces the amount of time one would want to work while receiving a national subsidy. Third, dental hygienists working in different occupations for marriage, childbirth, childcare, school and personal hygiene should make a way to return to the dental system immediately when they want. Fourth, the government should take institutional measures and offer down-to-earth support and benefits for women consideration their social characteristics to guarantee a balance between work and childcare.

• Sleep Medicine and Psychophysiology
• /
• v.4 no.1
• /
• pp.57-65
• /
• 1997

As jet lag of modern travel continues to spread, there has been an exponential growth in popular explanations of jet lag and recommendations for curing it. Some of this attention are misdirected, and many of those suggested solutions are misinformed. The author reviewed the basic science of jet lag and its practical outcome. The jet lag symptoms stemed from several factors, including high-altitude flying, lag effect, and sleep loss before departure and on the aircraft, especially during night flight. Jet lag has three major components; including external de synchronization, internal desynchronization, and sleep loss. Although external de synchronization is the major culprit, it is not at all uncommon for travelers to experience difficulty falling asleep or remaining asleep because of gastrointestinal distress, uncooperative bladders, or nagging headaches. Such unwanted intrusions most likely to reflect the general influence of internal desynchronization. From the free-running subjects, the data has revealed that sleep tendency, sleepiness, the spontaneous duration of sleep, and REM sleep propensity, each varied markedly with the endogenous circadian phase of the temperature cycle, despite the facts that the average period of the sleep-wake cycle is different from that of the temperature cycle under these conditions. However, whereas the first ocurrence of slow wave sleep is usually associated with a fall in temperature, the amount of SWS is determined primarily by the length of prior wakefulness and not by circadian phase. Another factor to be considered for flight in either direction is the amount of prior sleep loss or time awake. An increase in sleep loss or time awake would be expected to reduce initial sleep latency and enhance the amount of SWS. By combining what we now know about the circadian characteristics of sleep and homeostatic process, many of the diverse findings about sleep after transmeridian flight can be explained. The severity of jet lag is directly related to two major variables that determine the reaction of the circadian system to any transmeridian flight, eg., the direction of flight, and the number of time zones crossed. Remaining factor is individual differences in resynchmization. After a long flight, the circadian timing system and homeostatic process can combine with each other to produce a considerable reduction in well-being. The author suggested that by being exposed to local zeit-gebers and by being awake sufficient to get sleep until the night, sleep improves rapidly with resynchronization following time zone change.

• Journal of the Korean Society of Safety
• /
• v.7 no.2
• /
• pp.63-70
• /
• 1992

The aim of this research is to obtain a basic quantitative understanding of the effect of a noncondensable gas on the absorption of water vapor by a $H_2O$ / LiBr combination with n-octanol as the surfactant. Nonflowing aqueous solutions of LiBr (40,45,50 mass％) were exposed to saturated water vapor following the addition of an n-octanol sufactant (0.01 and 0.6 mass％). A small amount of a noncondensable gas (air) was allowed into the absorber (0.03 volume％) and its effect was analyzed by measuring the amount of water vapor absorbed. This study will aid to predict the performance of heat pump and safety operating condition when the noncondensable gas is not allowed in the absorber The results indicate that, in the presence of small amounts of a noncondensable gas, vapor absorption enhancement ratios are less than half o( those obtained under the same experimental conditions when a noncondensable gas is not present (1). The presence of a noncondensable gas causes the partial vapor pressure of air to increase at the vapor / liquid interface, which results in an instability of vapor absorption rate nd. hence, in an inhibition of interfacial disturbance.

• Journal of Intelligence and Information Systems
• /
• v.20 no.2
• /
• pp.163-178
• /
• 2014

Following research proposes "Virtualization of Smart Cards (ViSCa)" which is a security system that aims to provide a multi-device platform for the deployment of services that require a strong security protocol, both for the access & authentication and execution of its applications and focuses on analyzing Virtualization of Smart Cards (ViSCa) platform-based mobile payment service by comparing with other similar cases. At the present day, the appearance of new ICT, the diffusion of new user devices (such as smartphones, tablet PC, and so on) and the growth of internet penetration rate are creating many world-shaking services yet in the most of these applications' private information has to be shared, which means that security breaches and illegal access to that information are real threats that have to be solved. Also mobile payment service is, one of the innovative services, has same issues which are real threats for users because mobile payment service sometimes requires user identification, an authentication procedure and confidential data sharing. Thus, an extra layer of security is needed in their communication and execution protocols. The Virtualization of Smart Cards (ViSCa), concept is a holistic approach and centralized management for a security system that pursues to provide a ubiquitous multi-device platform for the arrangement of mobile payment services that demand a powerful security protocol, both for the access & authentication and execution of its applications. In this sense, Virtualization of Smart Cards (ViSCa) offers full interoperability and full access from any user device without any loss of security. The concept prevents possible attacks by third parties, guaranteeing the confidentiality of personal data, bank accounts or private financial information. The Virtualization of Smart Cards (ViSCa) concept is split in two different phases: the execution of the user authentication protocol on the user device and the cloud architecture that executes the secure application. Thus, the secure service access is guaranteed at anytime, anywhere and through any device supporting previously required security mechanisms. The security level is improved by using virtualization technology in the cloud. This virtualization technology is used terminal virtualization to virtualize smart card hardware and thrive to manage virtualized smart cards as a whole, through mobile cloud technology in Virtualization of Smart Cards (ViSCa) platform-based mobile payment service. This entire process is referred to as Smart Card as a Service (SCaaS). Virtualization of Smart Cards (ViSCa) platform-based mobile payment service virtualizes smart card, which is used as payment mean, and loads it in to the mobile cloud. Authentication takes place through application and helps log on to mobile cloud and chooses one of virtualized smart card as a payment method. To decide the scope of the research, which is comparing Virtualization of Smart Cards (ViSCa) platform-based mobile payment service with other similar cases, we categorized the prior researches' mobile payment service groups into distinct feature and service type. Both groups store credit card's data in the mobile device and settle the payment process at the offline market. By the location where the electronic financial transaction information (data) is stored, the groups can be categorized into two main service types. First is "App Method" which loads the data in the server connected to the application. Second "Mobile Card Method" stores its data in the Integrated Circuit (IC) chip, which holds financial transaction data, which is inbuilt in the mobile device secure element (SE). Through prior researches on accept factors of mobile payment service and its market environment, we came up with six key factors of comparative analysis which are economic, generality, security, convenience(ease of use), applicability and efficiency. Within the chosen group, we compared and analyzed the selected cases and Virtualization of Smart Cards (ViSCa) platform-based mobile payment service.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.211-221
• /
• 2006

Purpose The aims of this study were to evaluate micro-tensile bond strength of composite resin bonded to dentin following high-speed rotary handpiece preparation or Er:YAG laser preparation with two different adhesive systems and to assess the influence of different Er:YAG laser energies on the micro-tensile bond strength. Materials and Methods In this study, 40 third morlars were used. Flat dentin specimans were obtained and randomly assigned to eight groups. Dentin surfaces were prepared with one of four cutting types: carbide bur, Er:YAG laser (2 W, 3 W and 4 W) and conditioned with two bonding systems, Scotchbond Multipurpose Plus (SM), Clearfil SE bond (SE) and composite resin-build ups were created. After storage for 24 hours, each specimen was serially sectioned perpendicular to the bonded surface to produce more than thirty slabs in each group. Micro-tensile bond strength test was performed at a crosshead speed of 1.0 mm/min. Micro-tensile bond strengths (${\mu}TBS$) were expressed as means$\pm$SD. Data were submitted to statistical analysis using two-way ANOVA, one-way ANOVA, Student-Newman-Keuls' multiple comparison test and t-test. Results and Conclusion 1. Regardless of bonding systems, the ${\mu}TBS$ according to cutting types were from highest to lowest : 3 W, 2 W, Bur, and 4 W. In addition, there was no significant difference between Bur and 4 W (p<0.001). 2. Regardless of cutting types, SM showed significantly higher ${\mu}TBS$ than SE (p<0.001). 3. Bonding to dentin conditioned with SM resulted in higher ${\mu}TBS$ for 3 W compared to Bur, 2 W, and 4 W. There was no significant difference between 2 W and Bur (p<0.001). 4. Bonding to dentin conditioned with SE resulted in higher ${\mu}TBS$ for 3 W compared to 2 W, 4 W, and Bur. Bur exhibited significant lower ${\mu}TBS$ than all other cutting types. There were no significant differences between 3 W, 2 W and between 4 W and Bur (p<0.001). 5. The ${\mu}TBS$ of laser cutting groups were shown in order from highest to lowest: 3 W, 2 W and 4 W in two bonding systems. There was no significant difference between 2 W and 3 W in SE (p<0.001). : The ${\mu}TBS$ of composite resin bonded dentin was significantly affected by interaction between the cutting type and bonding system. In the range of 2 W-3 W, cavity preparation of the Er:YAG laser seems to supply good adhesion of composite resin restoration no less than bur preparation. In particular, if you want to use the self-etching system, including Clearfil SE bond for the purpose of a simplification of the bonding procedures and prevention of adverse effects by excessive etching, an Er:YAG laser may offer better adhesion than a bur.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.2
• /
• pp.137-152
• /
• 2009

Present experiment was conducted at the field of Gyeongnam Agricultural Research and Extension Services in Jinju city for two continuous cropping seasons to develop several adaptable and valuable year-round forage-producing system for elevating self-sufficiency and dollar-saving by reduced importing of crude forage. Twenty cropping systems were tested in experiment using whole crop barley (WCB), oat, rye, Italian ryegrass (IRG), and triticale in winter season and com, sorghum, sorghum ${\times}$ sudangrass hybrid, and oat in summer time. Sorghum ${\times}$ sudangrass hybrid showed highest fresh forage yield among experimented summer season crops, and followed com. Com produced the most dry matter yield, and followed sorghum${\times}$sudangrass hybrid, sorghum and oat in order. There was no significant effect of former winter crops on fresh and dry matter production succeeding summer time crops. Among winter season forage crops tested, oat showed the highest fresh and dry matter when clipped on mid-May, and followed triticale, IRG, rye and WCB. Winter-time cultivated crops showed no clear effect on the growth and forage (fresh and dry matter) producing ability of following summer crops. There was the most protein content in oat plant among summer season planted crops, and in sorghum for acid detergent fiber (ADF) and in sorghum ${\times}$ sudangrass hybrid for neutral detergent fiber (NDF), respectively. While, com showed highest value of relative feed value (RFV) and total digestive nutrients (TDN) among those crops. Among winter crops, the highest crude protein was in oat plant showing no significant differences of ADF and NDF, while, relatively higher value of RFV was recognized with rye and triticale. Also, triticale contained more TDN as compare to other forage crops. The cropping combinations such as com followed by (fb) rye and maize fb triticale were regarded as promising systems having higher dry matter producing ability among tested combinations. Considering TDN producing potential, the combinations with sorghum ${\times}$ sudangrass hybrid fb triticale andlor rye were would be suitable ones, coincidently. There was a tendency which elevating pH, electric conductivity (EC) and organic matter (OM) contents in soil after experiment comparing to before planting. More crude protein content in plant was shown at mid-May clipping as compared to the forage at April cut in all winter season grown crops. ADF and NDF contents were increased by delayed clipping showing decreased tendency of RFV and TDN in plant. In conclusion, many cropping systems would be available using above mentioned forage crops according to farmer's conditions and scale, etc.

• Journal of the Korean association of regional geographers
• /
• v.6 no.2
• /
• pp.21-40
• /
• 2000

The retail trades in many countries have changed recently according to the high quality, diversification, and marked individuality of consumer needs. Under the continually competing system of the WTO agreement, corporations based in the USA and the EU try to raise their market share in other countries so it is inevitable for Korean retail enterprises to compete with them. This paper is aimed at contributing to the efficient growth for Korean retail trade from the analysis of the development process in retail trade and its changing locations comparing Korea and the USA. Retailers in the USA have practiced diversified marketing strategies considerably in order to survive in a rapidly changing retailing environment. American retailing, which has the most advanced marketing system in the world, has been of growing concern to marketing strategies in Korea. The following is a brief summary of this study. 1. Speedy and higher quality consumption is needed in accordance with the great increase in the single-family household and the female labor force participation both in Korea and in the USA. Senior citizens have become a new consumer group due to the aging population. In the future the retail trade will switch over to diversified retail formats and internet shopping as countries are transformed into information and communication societies. 2. In Korea, the former retail system characterized by markets and department stores has been greatly changed since the late 1980s with emphasis on high quality and convenience in consumption behaviors, with large domestic enterprises and foreign distribution corporations participating in Korean retailing. In the USA, retailing mergers and takeovers by major retails, bankruptcies, and extra-large shopping centers have emerged since the late 1980s. Recently, the USA retailing formats have been changed from the lower price-oriented discount types to the large scale theme parks. Much emphasis was put on entertainment, resorts, and convention centers. On the other hand, non-store types, such as the internet shopping, the CATV shopping, as well as catalog and mail-order sales are drastically increasing, although the proportion of their sales is low up to now. 3. In Korea, most of the retail facilities are concentrated in Seoul and the Metropolitan Region, and the distribution ratio of facilities came to 52% in 1997. The periodic markets, traditional markets which open on a periodic basis, are located mainly in Chollanam-do and Kyungsangbuk-do. The large-sized discount stores have expanded their locations to the over-crowded apartment complexes in new towns, located in the Metropolitan Region, and the large provincial cities, unlike the suburban locations in the USA. Therefore we needed to give attention to the locational relations in retail facilities between Seoul & the Metropolitan Region and rural settlement areas. In the USA, urban areas grew quickly with the development of the automobile in the 1920s, and the location of stores changed from a dispersed style centering around rural areas to a centralized one in urban areas. There is an accelerated growth for suburban areas, which have grown rapidly since 1950. As the membership warehouse clubs were introduced in the 1970s, the decentralization of location was more intensified. On the other hand, inner cities were revitalized by rearranging existing facilities to cope with suburban areas. And the location-free virtual retailing & TV shopping are also growing every year. 4. In view of the above, the continuous and desirable development devices in Korean retail trade are summarized as follows: First, the countermeasures against economies of scale, increase in retailing sales, and rise of a employment percentage in retailing are in need. Second, a scheme of lowering the proportion of food retail sales, and increasing a ratio of durable goods sales need to be worked out. Third, the original ideas are needed to apply positively information, communication and technology to retailing, to graft the traditional types on modem ones based on the social culture. Fourth, strategies are needed to strengthen the competitiveness of our retail trade through cooperation and chains of smaller retailers, the large enterprises participating in the distribution industry. Fifth, in order to realize the above, the retail industry, the administration, and the academic world should support the retail segment with concern and a practical strategy plan.