• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.6
• /
• pp.745-753
• /
• 2019

Recently, with the development of long-range / high-altitude guided weapon system for defense against ballistic missile, test range and firing altitude for guided weapons are increasing. Due to the increase in the test range and the intercepting altitude, it is expected to increase the range of safety area required for the firing test. Comparing to the foreign countries which have many desert or non-residence, in the domestic circumstances where the population is concentrated and distributed, it is more important to predict the falling area and to set the safety area for safely carry out the long-range / high-altitude intercept test. In this paper, we consider the following three points. The first is the booster fall trajectory modeling, the second is the shroud fall trajectory modeling, and finally, the debris dispersion modeling for the missile intercept. Especially, the AUTODYN model was used to predict debris falling area which produced in the high-speed guided missile intercepting test.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.479-484
• /
• 2003

In the case of the feeder bus route choice, it is more desirable to choose the route by treating as a single route linked from origin to destination than the whole network. This study is to establish a concept that frames the feeder bus route choice technique for the change of the existing single bus route or the creation of the new feeder bus route. The concept of the feeder bus route choice technique in this study is not to frame the whole bus network but to frame a single route to a unit O-D pair. So, this study has the assumption that does not consider the waiting and transfer time at the bus stop. This system technique consists of the following phases: I) limitation of the road network examined for the study, ii) enumeration of the appropriate candidate routes by the permissive route length, and iii) determination of the optimum bus route by the route evaluation value.

• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1247-1254
• /
• 2003

Currently. the north american symptomatic carotid endarterectomy trial, european carotid surgery trial, and common carotid method are used to measure the carotid stenosis for determining candidate for carotid endarterectomy using the projection angiography from different modalities such as digital subtraction angiography. rotational angiography, computed tomography angiography and magnetic resonance angiography. A new computerized carotid stenosis measuring system was developed using MR angiography axial image to overcome the drawbacks of conventional carotid stenosis measuring methods, to reduce the variability of inter-observer and intra-observer. The gray-level thresholding is one of the most popular and efficient method for image segmentation. We segmented the carotid artery and lumen from three-dimensional time-of-flight MRA axial image using gray-level thresholding technique. Using the measured intima-media thickness value of common carotid artery for each cases, we separated carotid artery wall from the segmented carotid artery region. After that, the regions of segmented carotid without artery wall were divided into region of blood flow and plaque. The calculation of carotid stenosis degree was performed as the following; carotid stenosis grading is(area measure of plaque/area measure of blood flow region and plaque) * 100%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.169-175
• /
• 2013

According to the increase of the remarried family, education programs are needed to help the adaptation of them. The purpose of this study is to analyze remarriage preparations and to present considerations for the development of remarriage educational program in the future. Through analysis of total nine existing remarriage programs, there are needs to consider the following factors when developing remarriage programs. There is a need to be developed and implemented various programs to adequately support the remarried family. Also need to have a system that help adaption. As a result of research, future remarried program shall be as follows. First, the educational content consists of differency depending on the type of remarriage. Second, we should develop program avoiding the problem-oriented perspective, focus on the enhancements remarried families and address the adaptive factors. Third, psychological support counseling programs should be included. Remarriage Preparation measurement Scale is utilized and children is included in programs.

• Journal of KIISE:Databases
• /
• v.32 no.1
• /
• pp.43-55
• /
• 2005

Spatiotemporal databases support methods of recording and querying for spatiotemporal data to user by offering both spatial management and historical information on various types of objects in the real world. We can answer to the following query in real world: 'What is the average of volume of pesticide sprayed for cach farm land from April to August on 2001, within some query window' Such aggregation queries have both temporal and spatial constraint. However, previous works for aggregation are attached only to temporal aggregation or spatial aggregation. So they have problems that are difficult to apply for spatiotemporal data directly which have both spatial and temporal constraint. Therefore, in this paper, we propose spatiotemporal aggregate functions for analysis of spatiotemporal data which have spatiotemporal characteristic, such as stCOUNT, stSUM, stAVG, stMAX, stMIN. We also show that our proposal resulted in the convenience and improvement of query in application systems, and facility of analysis on spatiotemporal data which the previous temporal or spatial aggregate functions are not able to analyze, by applying to the estate management system. Then, we show the validity of our algorithm performance through the evaluation of spatiotemporal aggregate functions.

• The KIPS Transactions:PartD
• /
• v.16D no.2
• /
• pp.201-212
• /
• 2009

There are various methods to trace output in software development to verify the consistency and completeness of requirements. Existing studies do present the trace meta-model or automated tools, but fail to list specifically traced output or traced items. Also, in regards to trace tables, which contain traced items, existing studies don‘t consider the whole software development process but merely its sub-process. Given this, the present study suggests an extended requirements tracetable that tracks output from the inception of the project through the architectural design phase to the application delivery, following up on the researcher’s previous study on a tracetable that considered only a sub-process of the whole development process. In addition, in order to address the problem of the tracking process becoming complicated with increased tracefields due to an extended trace table, the researcher suggests a method for normalizing a requirements tracetable that can integrate and separate by development process phase. Apply it to theH system development project of a D company, and this study caseverified application possibility of study, confirmed an effect of a chase to easily find out an error of requirements. Improve precision of a traceto verify consistency of requirements and completeness through this study, and will minimize failure of a software development.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3683-3693
• /
• 1999

Most recognition methods of car licence plate have difficulties concerning plate recognition rates and system stability in that restricted car images are used and good image capture environment is required. To overcome these difficulties, I proposed a new recognition method of car licence plates, in which both intensity variation and color information are used. For a captured car image, multiple candidate plate-bands are extracted based on the number of intensity variation. To have an equal performance on abnormally dark and bright Images. plate lightness is calculated and adjusted based on the brightness of plate background. Candidate plate regions are extracted using contour following on plate color pixels in oath plate band. A candidate region is decided as a real plate region after extracting character regions and then recognizing them. I recognize characters using template matching since total number of possible characters is small and they art machine printed. To show the efficiency of the proposed method, I tested it on 200 car images and found that the method shows good performance.

• Journal of Intelligence and Information Systems
• /
• v.11 no.2
• /
• pp.17-29
• /
• 2005

The purpose of the study was to explore the potential of the Social Network Analysis as an analytical tool for scientific investigation of learner-learner, or learner-tutor interaction within a Computer Supported Corporative Learning (CSCL) environment. Theoretical and methodological implication of the Social Network Analysis had been discussed. Following theoretical analysis, an exploratory empirical study was conducted to test statistical correlation between traditional performance measures such as achievement and team contribution index, and the centrality measure, one of the many quantitative measures the Social Network Analysis provides. Results indicate the centrality measure was correlated with the higher order teaming performance and the peer-evaluated contribution indices. An interpretation of the results and their implication to instructional design theory and practices were provided along with some suggestions for future research.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.486-490
• /
• 2011

To investigate the effect of two-emission-layer structure on the emission characteristics of the phosphorescent white organic light-emitting diodes (PHWOLEDs), the PHWOLEDs with two different emission layers, blue EML(29 nm, FIrpic-doped mCP) and red EML(1 nm, Ir(pq)$_2$acac-doped CBP)), following host-guest system were fabricated. The bi-layered blue EML was composed of mCP:FIrpic (20 nm, 7 vol.%) and mCP:FIrpic (9 nm, 7, 10, 15, 20, and 25 vol.%, respectively). When the concentration of FIrpic was increased from 7 to 15 vol.%, light emission luminance, current efficiency, and external quantum efficiency were increased. On the contrary, when the concentration of FIrpic was increased to more than 20 vol.%, light emission luminance, current efficiency, and external quantum efficiency were decreased. The PHWOLEDs with the bi-layered blue EML structure of mCP:FIrpic (20 nm, 7 vol.%) and mCP:FIrpic (9 nm, 15 vol.%) showed current efficiency of 29.7 cd/A and external quantum efficiency (EQE) of 16.6% at 1,000 $cd/cm^2$.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.2
• /
• pp.167-172
• /
• 2014

The purpose of this study was to investigate walking standard time and joint powers of the lower extremities on the changes of illuminations in the elderly women. Ten older women ($70.90{\pm}3.28$ years, $154.70{\pm}3.47$ cm, $53.80{\pm}5.39$ kg) with normal vision and no gait disabilities participated in this study. All the experiments were performed on a level walkway from low to high lighting (six conditions). A 3-dimensional motion capturing system, force-plate, and EMG were used to acquire and analyze walking motion, force, and muscle activity data; the sampling frequency was 100 Hz, 1000 Hz and 1000 Hz respectively. To test the differences on walking standard time and joint powers of the lower extremities between the six lighting conditions, one-way repeated ANOVAs were evaluated. The following results were drawn: First, mean standard time was about 1.3 sec/stride, and velocities were smaller with lighting increasing except 100 Lx. Second, the joint power patterns of ankle and knee were not consistent, but only hip joint power was a greatest in 6 Lx and a smallest in 400 Lx. Third, standard times(100 Lx<300 Lx, 400 Lx) were statistically significant, and hip joint max powers (100 Lx>others) were also statistically significant. But ankle and knee joint max power were not statistically significant. These results showed that standard times from low to high lighting were not consistent, and hip joint of 100 Lx has a greatest rotational torque. We suggested that gait strategies of them as to changing illuminations were not consistent and findings may represent a lack of adaptability in the elderly women.