• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.632-643
• /
• 2005

This paper presents a folded stripline-fed small broadband disk-loaded monopole antenna with vertical ground plane. The bandwidth of the proposed antenna can be enhanced by electromagnetic coupling between the shorted rectangular disk and the probe with folded strip line. The measured impedance bandwidth of the proposed antenna is $37.6\%$ for $VSWR\leq2$ with the center frequency at 2.313 GHz and has the physical dimensions of only $11mm\times11mm\times11mm$ which corresponds to the electrical length of $0.085\lambda_0\times0.085\lambda_0\times0.085\lambda_0$. For improving the radiation pattern characteristics, rectangular slits are inserted in the vertical ground plane. Rectangular slits affect the currents distribution on the ground plane, so that the antenna radiation in the direction of the ground plane is reduced more than 3 dBi. Gain of the antenna is approximately 2.6 dBi within the bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.660-669
• /
• 2010

In this paper, a multiple antenna system for next generation mobile applications is proposed. The proposed MIMO antenna consists of two parallel folded monopole antennas with the length of 100 mm and spacing of 6 mm and a decoupling network which locates at the top side of a mobile handset. In order to improve the isolation characteristic at the LTE band 13, a decoupling network was added between the two antenna elements placed close to each other. The decoupling network, consisting of two transmission lines, a shunt reactive component and common ground line, is simple and compact. To obtain the wide bandwidth characteristic, an wide folded patch structure generating the strong coupling between feeding and shorting lines through the slit is used at the bottom side of a mobile handset. Also, the performance of a multiple antenna system composed of three antenna elements is analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2443-2448
• /
• 2013

In this paper, a design of size-reduced microwave oscillator using common defected ground structure (common DGS) is described. At first, an oscillator is designed using the normal stub resonator, and the conventional DGS patterns are inserted for the first trial of size-reduction. Finally, the DGS resonator section is folded by half size in order to adopt the common DGS, and this produces the proposed size-reduced oscillator. Common DGS pattern is inserted for a better size-reduction than when conventional DGSs are used. The folded transmission line is connected using the 3-dimensional signal via-holes. For an example of design, a 2.1GHz oscillator is designed and fabricated using a small signal transistor and common DGS, which shows the size-reduction of 11 mm. The measurement shows 6.7dBm of output power and -133dBc/Hz@1MHz of phase noise. The measured performances are so similar to those of the oscillators before size-reduction and prove the proposed size-reduction method of oscillators using common DGS.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.368-372
• /
• 1998

A 16-views 3 dimensional imaging system is designed by spatially combinding two 8-views time multiplexed image channels. Each 8-views channel composed of 3 primary color CRTs and a dichroic beam splitter which combining the three CRTs as one channel. Each CRT displays 8-view images time sequentially. These images are projected to a holographic screen of a size 1$\times$0.8 $m^2$ through a projection optics. Characteristics of the three different configurations of projection optics are examined with the optics designing program "DEMOS" to select an optimized projection optics for the system. The configulation of the optimized projection optics is found like following; images from each channel combined by two-fold mirror are projected by a projection objective through a 16-strips LCD shutter. In this configuration, the shutter should be located at the entrance pupil of the objective, and the folded edge of the two-fold mirror should contact symmetrically to the center line of the shutter.e shutter.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.141-146
• /
• 2000

We introduce the algorithms of 3-D position estimation using a laser sensor for automatic die remodeling. First, a vision sensor based on the optical triangulation was used to collect the range data of die surface. Second, line vector equations were constructed by the measured range data, and an analytic algorithm was proposed for recognizing the die location with these vector equations. This algorithm could make the transformation matrix without any specific corresponding points. To ascertain this algorithm, folded SUS plate was measured by the laser vision sensor attached to a 3-axis cartesian manipulator and the transformation matrix was calculated.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1504-1512
• /
• 2016

This paper presents a new single-phase asymmetrical cascaded multilevel DC-link inverter. The proposed inverter comprises two stages. The main stage of the inverter consists of multiple similar cells, each of which is a half-bridge inverter consisting of two switches and a single DC source. All cells are connected in a cascaded manner with a fixed neutral point. The DC source values are not made equal to increase the performance of the inverter. The second circuit is a folded cascaded H-bridge circuit operating at a line frequency. One of the main advantages of this proposed topology is that it is a modular type and can thus be extended to high stages without changing the configuration of the main stage circuit. Two control schemes, namely, low switching with selective harmonic elimination and sinusoidal pulse width modulation, are employed to validate the proposed topology. The detailed approach of each control scheme and switching pulses are discussed in detail. A 150W prototype of the proposed system is implemented in the laboratory to verify the validity of the proposed topology.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.114-117
• /
• 2012

A small-sized ($15mm{\times}30mm$) planar monopole MIMO antenna that offers high-isolation performance is presented in this letter. The antenna is miniaturized using inductive coupling within a meander-line radiator and capacitive coupling between a radiator and an isolator. High isolation is achieved by a T-shaped stub attached to the ground plane between two radiators, which also contributes to the small size using a folded structure and the capacitive coupling with radiators. The proposed antenna operates for the WLAN band within 2.4 GHz to 2.483 GHz. The measured isolation (S21) is about -30 dB, and the envelope correlation coefficient is less than 0.1.

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.289-293
• /
• 1993

A Nd:YLF laser pumped by a CW GaAlAs laser diode(LD) at 792 nm has been designed and fabricated. The output power was investigated as a function of LD spectrum and pump power. A folded laser resonator was desinged to compensate for the astigmatism produced at the Brewster surface of Nd:YLF rod. We obtained output power of CW 1.1 Watt when the pumping power was 2.8 Watt and the output wavelength of LD was temperature tuned to the peak absorption line of Nd:YLF. The overall efficiency was 39 % and slope efficiency was 41 %.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.7
• /
• pp.620-628
• /
• 2010

Using the responses of deck plate, a new bridge weigh-in-motion system has been introduced. The approach includes not only a systematic algorithm for the extraction of moment influence sequence but also a sensitivity-based system identification technique. The algorithm indentifies the influence sequence, the axle loads, and axle location of moving vehicles on a bridge, simultaneously. The accuracy and practicability of the algorithm have been examined experimentally for a folded deck plate on Yongjong Grand suspension bridge. It turns out that the two-dimensional effects of the behavior of deck plate should be considered for further accuracy improvement.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.127-135
• /
• 2018

This paper was studied the tri-band folded monopole antenna design with Mu-negative metamaterial unit cell, which operates at 700 MHz UHD broadcast band and 2.45 GHz/5 GHz WiFi band. The MNR metamaterial is fabricated by forming a capacitor on the backside of the antenna substrate and connecting it to the ground plane through a strip line and a via hole so that a single cell can operate in the MZR (Mu zero resonator). Through this, the resonance point can be controlled to resonate in the zero mode in 700 MHz band, and the bandwidth is improved. Experimental results show that the 10dB bandwidth and gain are 309 MHz (41.2%) and 5.298 dB at the first resonance point, and the 10dB bandwidth and gain at the second resonance point are 821.9 MHz (33.5%) and 2.7840 dB respectively. At the third resonance point, the gain and bandwidth were 1.1314 GHz (20.6%) and 2.9484 dB respectively. We confirmed that the resonance point with theoretical value is in agreement with experimental value. And the radiation pattern is generally omnidirectional, and it has been confirmed that the radiation pattern is good in both forward and backward directions at 0.75 GHz and 2.45 GHz, and has a radiation pattern with multiple lobes at 5.5 GHz.