• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.270-276
• /
• 2018

Fifth-generation communications are approaching, and they will require broadband antennas that include the existing LTE frequency band (1.7 GHz to 2.7 GHz) and the newly allocated frequency band (3.4 GHz to 3.7 GHz). Many kinds of antennas satisfy the required broadband characteristics, including the dual-element folded dipole antenna proposed in this paper. A zigzag line was used to make the antenna more compact. This was accomplished by reducing the physical length while maintaining the electrical length. To validate the proposed antenna, a prototype was fabricated using PCB (${\epsilon}_r$:4.4, Height: 1.6 mm) and its performance was evaluated. Results obtained by simulation and experiment showed good agreement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.886-894
• /
• 2014

A wideband bow-tie antenna fed by wideband microstrip-coplanar stripline(CPS) balun and band notch structures that can be applied to bow-tie antenna are proposed in this paper. In order to increase bandwidth, bow-tie radiators are reshaped so that the surface current flows continuously, and wideband impedance matching is achieved by adjusting strip width and spacing of CPS feeding line. The VSWR is measured as 2:1 over the wide frequency range of 2.3~12 GHz. The fabricated antenna size is $60mm{\times}60mm$. In order to achieve the band-notch function at WLAN(5.8 GHz), ${\lambda}/4$ folded-slits located ${\lambda}/4$ away from feeding point are utilized. To minimize the slit size, folded-slit type is adopted. The measured VSWR is 7:1 and gain attenuation is 14 dB at 5.8 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1101-1110
• /
• 2011

This paper presents a printed, wideband folded monopole antenna for laptop and tablet computer applications. The proposed antenna is designed to cover bandwidth(2.3~10.6 GHz) of Bluetooth, WiMAX, and UWB system by using the printed folded monopole antenna having asymmetrical line width coupling with a parasitic inverted- L element. Also, wireless LAN band(5.15~5.85 GHz) which interferes with UWB system is rejected by inserting half-wavelength open stub in the folded monopole antenna. -10 dB bandwidth of the fabricated wideband antenna is 2.27~10.6 GHz (4.7:1) and -10 dB band-rejected bandwidth is measured as 700 MHz(5.15~5.85 GHz, 12.72 %). The gain and efficiency of the antenna except for the rejected band are higher than 3.93 dBi and 91.89 % and are measured as -2 dBi and 14.65 % at 5.5 GHz which is band-rejected frequency. The size of the antenna is suitable to install for small space of tablet and laptop computers as 12.75(1 ${\lambda}$/10)${\times}$12(1 ${\lambda}$/11) $mm^2$(${\lambda}$ is free space wavelength at 2.3 GHz). Therefore, we verified that the designed antenna is appropriate for wideband antenna of tablet and laptop PC applications.

• Journal of Fashion Business
• /
• v.24 no.5
• /
• pp.106-124
• /
• 2020

The purpose of this study was to analyze the three-dimensional (3D) characteristics and reproducibility of the effective expression of North American smocking pleats in the process of making clothes using a 3D virtual clothing system (CLO) and present a method of expression according to the types of North American smocking. In this study, lattice, lozenge, and flower smocking were produced as real smocking and 3D virtual content, and actual muslin properties were measured using a Fabric Kit and reflected using an emulator. The results of this study confirmed that a dense puckered design such as North American smocking could be expressed depending upon the internal line, fold angle, and reinforcement setting for 3D smocking. To partially apply pleats to flat fabrics, it was necessary to set fold lines. The fold line setting could be expressed by designing the internal line in horizontal, vertical, and diagonal directions according to the North American smocking design, and then setting the fold angle for each internal line. By setting fold angles of 0 degrees and 360 degrees according to the folding direction of the set internal line, the fabric was clearly folded and stable pleats were created. This study will contribute to the vitalization of the 3D virtual fashion content industry by analyzing and presenting the optimal expression method of sophisticated and complex pleats generated according to the North American smocking design pattern.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2773-2778
• /
• 2015

In this paper, the compact antenna with three folded patches for use in a number of bands of LTE, WCDMA, US-PCS, and WLAN at the same time is proposed. As the changes in widths of the 3 patches to widen the insufficient bandwidth are given, it is optimized for $S_{11}$<-6dB(VSWR<3). The CPW with a number of advantages is used in the proposed antenna. The proposed antenna is designed and fabricated with FR4 substrate to the size of $44.9{\times}35{\times}1mm^3$. Fabricated antenna has within $S_{11}$<-6dB under operating bands. And measured characteristics of radiation patterns and gains are shown under operating bands.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.5
• /
• pp.98-104
• /
• 2006

In this parer, proposed a Miniature inverted F Antenna for Bluetooth applications using folded structure and confirm it through producing and measurement. The proposed antenna as PIFA is optimized the impedance matching and the radiation pattern by positioning of feed line and short line. This antenna is designed with Microwave Studio presented CST and the optimized antenna structure is fabricated. The optimized miniature antenna size is 17.3 * 6 * 0.8 mm, the measured return loss bandwidth is 220MHz at 2.45GHz, the radiation pattern is quasi omni, and the gain is -1 dBi. these results are similar to the simulation data. It is comparatively appropriate for Bluetooth system.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.239-244
• /
• 2015

A simple planar heptaband antenna with a coupling feed for 4G mobile applications is proposed. This antenna consists of a folded monopole and a feed strip line on the top plane and an L-shaped line with a coupling plate on the bottom plane. The antenna provides a wide bandwidth to cover the LTE/GSM/UMTS heptaband operation. The measured 6-dB return loss bandwidth is 152 MHz (820-972 MHz) in the lowfrequency band and 1,150 MHz (1,600-2,750 MHz) in the high-frequency band. The overall dimensions of the proposed antenna are $60mm{\times}105mm{\times}1.2mm$.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.859-879
• /
• 2004

As a result of research, the characteristics of the general costumes from the king Young-Cho period to the king Jung-Cho period in Genre Paintings of Mung-Hyun Oho, Yong Yun, In-Sang Lee, Hee-Eon Kang follows. First, the typical man wore his hair in a topknot(sangtu), and put on 'Bung-gu-ji', 'Lip', or a scarf on his head. The length of the 'Jeogori'(Korean traditional jacket) was long enough to cover the waist. Dress for work had side slits, and had half length sleeve Jeogori, and short pants looked like 'Jam-bang-i'. They went barefoot and wore 'Jipsin'(Korean traditional straw shoes). Dress for outdoor was 'Po' that knot at front of chest by band. 'Baji'(slacks) were with knot below knee, worn 'Hang-jun'(ankle band) and the width of slacks was suitable. They were 'Beoseon'(Korean traditional socks) and shoes. Second those in the upperc1ass and those in the military put on 'Mang-geon', 'Gat', 'Sa-bang-gan', 'Tang-geon', 'Bok-geon' on their head on a topknot. Most of them wore 'So-chang-i', 'Jung-chi-mag' or 'Do-po'. The length of Jeogori covered the waist or the hip and were tied with 'Go-rum'(ribbon). Baji was tied with Hang-jun and 'Dae-nim'. The waist of the slacks were tied with a dark colored waist-band and folded down their waist of slacks. They wore white color Beoseon and 'Hye' or dark color leather shoes. They wore 'Sup'(assistant of arm) for bow. It showed the lifestyle of the 18C with fan, 'Be-ru', 'Mug', 'Yun-jug', teacup, pot, etc. Third, child's hair was short or knotted to the back of the head. The length of Jeogori reached waist line, Git of Jeogori was 'Dunggurai-Kit'(shape of round) and other style Jeogori, which reached the hip line, had side-slit. Baji was tied with Dae-nim, and the width of the slacks is suitable. They hang 'Yum-nang'(Pocket). Final, most women worked outdoors wearing their hair in a high twisted style, or covered it with scarf. They wore Jeogori and 'Chima'(Korean traditional skirts), Bagi. They folded up the sleeves of the Jeogori. And they folded the 'Jambang-i-styled' pants to just above the knees, fastening at the waist. When they wore skirts, they also wore underpants under the skirt that went down to the knees. Most of them went barefoot and wore straw shoes, Jipsin. Through genre paintings, we can understand the ways and forms of our ancestor's clothing. And with our understanding, interest, and passion, we can be familiar with Hanbok in our daily life by succeeding and creating its peculiar style. And then we can promote the globalization of Hanbok.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1662-1667
• /
• 2012

This paper describes the design of size-reduced ring hybrid couplers (RHC) using a common defected ground structure (CDGS). The proposed RHC consists of double-sided microstrip line and the CDGS patterns which are placed in the common ground plane of the double-sided microstrip line. The effects of DGS as a periodic structure are imposed on both microstrip lines, so the advantages of the existing DGS are doubled. The normal RHC is designed first and folded by the half reference plane with the CDGS realized on the common ground plane. So another trial for size-reduction is performed by folding the RHC and inserting CDGS besides to the conventional DGS. In order to show a design example, a 2GHz RHC is designed and miniaturized using CDGS. The size of the miniaturized RHS is around 50% of the normal one, while the performances are well preserved even after the size-reduction.

• Journal of the Korean Home Economics Association
• /
• v.40 no.10
• /
• pp.177-189
• /
• 2002

The purpose of this study was to develop a suitable jacket pattern for elderly women. The subjects were two women of the ages of 65-70, who had different bust size. To reflect the ready made pattern drafting systems, 4 industrial patterns were selected. After analyzing the problems of these patterns, a new jacket pattern was proposed. The results were as follows : 1) The amount of appropriate ease in fitted jacket for elderly women was about 10cm at the bust circumference, 10∼12cm at the hip circumference and the height of sleeve cap was AH/3+0.5cm. 2) Considering an enlargement of waist and abdomen, difference between front and back size was 2cm on the bust line, 6-8cm on the waist and hip line. 3) Because of the shape of concavity of back-waist, center back line in the pattern was folded by 0.5cm from center back waist toward side seam for manipulation. 4) The new jacket pattern was compared with the existing pattern through the wearing test by sensory evaluation. It showed that the fit and comfort of experimental pattern was superior to those of the existing pattern.