• Title/Summary/Keyword: folded

검색결과 673건 처리시간 0.027초

Mixed finite element formulation for folded plates

  • Eratli, Nihal;Akoz, A. Yalcin
    • Structural Engineering and Mechanics
    • /
    • 제13권2호
    • /
    • pp.155-170
    • /
    • 2002
  • In this study, a new functional is obtained for folded plates with geometric (kinematic) and dynamic (natural) boundary conditions. This functional is the combination of two different functionals. Both functionals are obtained for thick plates which carry in-plane and lateral forces. A new mixed finite element is developed with $4{\times}13$ nodal parameters for folded plates (REC52). Forces and moments which are the necessary unknowns in engineering problems are obtained directly using the technique suggested here. The use of the global co-ordinate system causes time consuming operations and therefore the Lagrange multiplier method is used to relate the components of the parameters on the fold line. Numerical results are presented for folded plates and compared with experimental results.

Folded 하이퍼큐브 연결망과 오드 연결망 사이의 임베딩 알고리즘 (Embedding Algorithms among Folded hypercube Network and Odd network)

  • 김종석;이형옥
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2007년도 추계학술발표대회
    • /
    • pp.663-666
    • /
    • 2007
  • 본 논문에서는 하이퍼큐브보다 망비용이 개선된 Folded 하이퍼큐브 연결망과 오드 연결망 사이의 임베딩을 분석한다. Folded 하이퍼큐브 $FQ_n$을 오드 연결망 $O_{2n+1}$에 연장율 2, 밀집율 1에 임베딩 가능함을 보이고, 오드 연결망 $O_d$을 Folded 하이퍼큐브 $FQ_{2d-1}$에 연장율 2, 밀집율 1에 임베딩 가능함을 보인다.

차량용 DMB 안테나를 위한 소형화 된 Folded PIFA 설계 (Design of The Miniaturized Folded PIFA for The Automobile DMB Antenna)

  • 김상중;우덕제;이택경;장원호
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.397-400
    • /
    • 2005
  • 본 논문에서는, PIFA 끝 부분을 접은 DMB 차량용 폴디드 PIFA를 제안한다. PIFA의 단락스트립 반대편 끝 부분을 접음으로써 1/4 파장이 아닌 1/10 파장에서 공진 주파수가 형성된다. 이는 PIFA에 비해 60 % 정도의 안테나 크기 축소 효과를 가진다. 또한 기생패치를 사용했을 때 폴디드 PIFA는 대역폭이 늘어난다. 따라서 제안된 안테나는 차량용 지상파 Digital Multimedia Broadcasting (DMB) 안테나로 응용이 가능하다.

  • PDF

광대역 이중 폴디드 마이크로스트립 안테나 설계 (A Design of Wide band Dual Folded Microstrip Antennas)

  • 이현진;임영석
    • 대한전자공학회논문지TC
    • /
    • 제41권7호
    • /
    • pp.75-79
    • /
    • 2004
  • 본 논문에서는 MMIC 및 LTCC등과 같이 집적화 회로에 이용할 수 있는 단일 평판 구조의 광 대역 안테나를 설계 및 제작하였다. 무지향 패턴의 광대역 마이크로스트립 안테나의 새로운 구조를 제안하였다. 안테나 구조는 다이폴 안테나구조를 응용한 폴디드(folded) 마이크로스트립 안테나이며 CPW급전 방식을 사용하였다. 이 때 단일 평판구조의 접지면의 유한성에 의한 안테나 특성의 안정성에 영향을 미치게 된다. 따라서 본 연구에서 접지면을 증가시키고자 마크로스트립 루프 안테나의 외곽에 폴디드 구조의 접지면을 확장하였다. FDTD방법을 이용하여 안테나의 특성을 해석하였다. 제안한 안테나는 PCS 대역(1.75∼1.87㎓)과 IMT2000(1.92∼2.17㎓) 대역 및 ISM 대역에 적합한 주파수 대역을 얻었다.

Design a Non-Slot Step Folded PIFA and Analyze the Characteristic for Dual-Band GSM and W-CDMA

  • 이비오;고현정;박상복;천창율;정용식
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.3-6
    • /
    • 2008
  • In this paper, we propose the folded PIFA with its made an alteration to a factor of resonance for L-slot PIFA. Proposed antenna maintain diminished size patch and improve each bandwidth of GSM(0.88$\sim$-0.96 GHz) and W-CDMA(1.92$\sim$2,17 GHz) for miniaturized repeater. The non-slot step folded PIFA's structure that design of essence was general L-slot PIFA for dual-band. It has no U-slot, multi band and the another slot. The parameters of proposed antenna were optimized for dual-band and compact size by folded singleness patch. Proposed antenna by using folded singleness patch take satisfaction main point, bandwidth of GSM and W-CDMA, compact patch size($39{\times}21{\times}13mm^3$). The antenna was designed by FDTD simulation tool and it was made from result of simulation. Measured data shown that the proposed non-slot step folded PIFA was strong possibility.

  • PDF

Disk-Loaded 다이폴과 Folded 다이폴로 동작하는 Reconfigurable 안테나 (A Reconfigurable Antenna for Alternative Operation between Disk-Loaded Dipole and Folded Dipole)

  • 박슬기;정근석;추호성;오이석
    • 한국전자파학회논문지
    • /
    • 제18권12호
    • /
    • pp.1327-1336
    • /
    • 2007
  • 본 논문에서는 PIN 다이오드를 사용하여 disk-loaded 다이폴 안테나와 folded 다이폴 안테나로 형상이 변화하는 새로운 구조의 소형 안테나를 개발하였다. 개발된 안테나는 PIN 다이오드의 RF on/off 특성을 이용하여 안테나의 전기적 길이를 변화시켜 이중 대역에서 동작하며, 저주파 대역에서는 높은 복사 저항 값을 가지는 folded 다이폴 안테나로 동작하고 고주파 대역에서는 수평 방향으로 무지향성의 복사 패턴과 수직 방향으로 도넛 형태의 복사 패턴을 가지는 disk-loaded 다이폴 안테나로 동작한다. 제안된 안테나는 $20{\sim}300$ MHz에서 30cm 다이폴 안테나에 비해 크기가 소형화 되었음에도 높은 이득을 가진다. 또한, $300{\sim}1,300$ MHz에서 $80^{\circ}$ 이상의 넓은 빔 폭을 가짐으로써 방향 탐지 안테나로 사용이 가능하다.

Closely Spaced Two-Element Folded-Dipole-Driven Quasi-Yagi Array

  • Ta, Son Xuat;Kang, Sang-Gu;Park, Ikmo
    • Journal of electromagnetic engineering and science
    • /
    • 제12권4호
    • /
    • pp.254-259
    • /
    • 2012
  • This paper presents a closely spaced two-element folded-dipole-driven quasi-Yagi array with low mutual coupling between adjacent elements. The antenna utilizes a T-junction power divider as the feeding network, with an input impedance of $50{\Omega}$. A microstrip-stub is added to the ground plane in the middle of the two elements to improve the mutual coupling characteristics. The folded dipole driver is connected to a $50{\Omega}$ microstrip line via a broadband microstrip-to-coplanar stripline transition with a quarter radial stub. A mutual coupling of less than -22 dB is measured between two folded-dipole-driven quasi-Yagi antennas with a center-to-center spacing of 30 mm ($0.55{\lambda}_0$ at 5.5 GHz). The proposed quasi-Yagi array yields a measured bandwidth of 4.75~6.43 GHz for the -10 dB reflection coefficient and a gain of 6.14~7.12 dBi within the bandwidth range.

인쇄회로형 폴디드 슬롯 안테나 설계.제작 (Design and fabrication of the Printed Type Folded Slot Antenna)

  • 송면규;한중호;이종녕;양규식
    • 한국정보통신학회논문지
    • /
    • 제3권2호
    • /
    • pp.267-272
    • /
    • 1999
  • 일반적인 인쇄회로형 안테나는 사용가능 주파수 대역폭이 협소하여 여러 가지 복잡한 과정을 거쳐 대역폭 확장을 위한 대책을 강구하고 있으나, 기존의 실린더형 폴디드 다이폴 안테나의 특성이 단일 다이폴 보다 우수함을 이용하여 이를 인쇄회로형 폴디드 안테나로 개량함으로서 기존의 일반적인 인쇄회로형 보다 넓은 대역폭을 간단한 구조에서 실현할 수 있었다. 급전선로로서는 최근 관심의 대상이 되고 있는 코플레나 도파관(CPW)의 장점을 활용하기 위하여 CPW 선로를 이용하여 급전하도록 하였으나, 인쇄회로형 폴디드 다이폴 안테나의 경우 CPW 선로를 이용할 경우 급전이 복잡하게 때문에, 폴디드 다이폴을 폴디드 슬롯 형태로 바꾸어 설계를 하고, 바비넷 원리를 이용하여 설계 데이타를 간단히 대치할 수 있는 방법을 활용하였다. 설계하고 제작된 CPW급전 폴디드 슬롯 안테나의 특성을 측정한 결과 주파수 대역폭은 약 20% 정도로 기존의 일반적인 형태의 인쇄회로형 안테나보다 현저히 개선됨을 확인할 수 있었다.

  • PDF

인쇄회로형 폴디드 슬롯 안테나 설계ㆍ제작 (Design and Fabrication of the Printed Type Folded Slot Antenna)

  • 송면규;양규식
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 1999년도 춘계종합학술대회
    • /
    • pp.301-304
    • /
    • 1999
  • 일반적인 인쇄회로형 안테나는 사용가능 주파수 대역폭이 협소하여 여러 가지 복잡한 과정을 거쳐 대역폭 확장을 위한 대책을 강구하고 있으나, 기존의 실린더형 폴디드 다이폴 안테나의 특성이 단일 다이폴 보다 우수함을 이용하여 이를 인쇄회로형 안테나로 개량해 보았다. 최근 관심의 대상이 되고 있는 코플레나 도파관(CPW)의 장점을 활용하기 위하여 CPW 선로를 이용하여 급전하도록 한다면, 인쇄회로형 폴디드 다이폴 안테나의 경우 급전이 용이하지 않기 때문에, 폴디드 다이폴을 폴디드 슬롯 형태로 바꾸어 설계를 하고, 바비넷 원리를 이용하여 설계 데이터를 간단히 대치할 수 있는 방법을 활용하였다. 설계하고 제작된 CPW 급전 폴디드 슬롯 안테나의 특성을 측정한 결과 주파수 대역폭은 약 20% 정도로 기존의 일반적인 형태의 인쇄회로형 안테나보다 현저히 개선됨을 확인할 수 있었다.

  • PDF

무선 DVI 동글장치를 위한 스파이럴 구조를 갖는 폴디드 모노폴 안테나에 관한 연구 (A Study on Folded Monopole Antenna with Spiral Shape for Wireless DVI Dongle Applications)

  • 이재춘;이윤민
    • 전기학회논문지P
    • /
    • 제65권1호
    • /
    • pp.72-75
    • /
    • 2016
  • In this paper, we proposes a internal antenna for wireless DVI dongle device using the folded monopole structure. The proposed antenna uses a basic structure of spiral and monopole. The antenna optimized for parameters length, gap, width, and rectangle of folded monopole antenna using the spiral structure. To confirm the characteristics of the antenna parameters, HFSS from ANSYS Inc. was used for the analysis. We used an FR4 dielectric substrate with a dielectric constant of 4.4. The DVI dongle size of the proposed antenna is $50{\times}40{\times}1.6mm$, and the size of the antenna area is $10{\times}40mm$. There is a value of return loss less then -10dB in 2.4GHz and 5.8GHz, band and the maximum antenna gain is -4.13dBi. The utilization possibility of the wireless DVI Dongle antenna have a folded monopole with spiral shape could be confirmed according to compare and analyze the simulation and measurement data.