• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1484-1486
• /
• 1998

Recently, extending the local broadcasting and increasing lots of informations, the low-loss communication cable is required in proportion as frequency. The reason of transportation loss causes to using the high frequencies like hundreds of MHz or decades of GHz. For the low transportation loss, it is required the developing-technology of foaming and the high foamed insulator with the dielectric ratio of the nearest to 1. Therefore, there is the purpose of developing the insulating materials for the low dielectric ratio. Also it is important to measure the attenuation, which is one of the important parameters, as the evaluation of transportation characteristic with frequency in the communication cable. In this paper, the result showed that the dielectric ratio(1.4) of the nearest to 1 and low attenuation with high frequency were very related to the transportation and reflection characteristics such as propagation velocity(82.27%), delay time and voltage standing wave ratio(VSWR).

• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.742-749
• /
• 2002

본 연구는 기포콘크리트내에 연속공극이 생성되는 과정을 밝히고, 연속공극을 갖는 기포콘크리트의 제조에 미치는 기포제의 영향을 검토한 것이다. 실험결과, 연속공극을 형성하는 기포콘크리트는 온도, 시멘트페이스트의 점성 및 유동성, 기포의 안정성 등의 영향을 받고, 기포의 응집력에 의해 형성되는 것으로 사료된다. 또한, 기포첨가량이 시멘트량 2% 이하에서 독립공극을 형성시키고, 9%를 초과할 경우 기포의 소포현상이 나타났다. 한편, 시멘트분말도 3000, 6000 및 8000$\textrm{cm}^2$/g에서 분말도가 높을수록 압축강도는 증가하였으며, 분말도 변화에 따른 연속공극율은 38% 52%, 22%로 나타나 분말도 6000$\textrm{cm}^2$/g에서 연속공극율이 가장 높게 나타났다. 더 나아가 기포콘크리트의 압축강도는 물시멘트비를 45%에서 25%로 감소시킬 경우 15 kgf/$\textrm{cm}^2$에서 20 kgf/$\textrm{cm}^2$로 높게 나타나 물시멘트비의 감소는 기포콘크리트의 비중 변화 없이 강도를 증진시키는데 효과적이었다.

• 한국건축시공학회지
• /
• 제9권4호
• /
• pp.63-73
• /
• 2009

최근 건설생산현장에서는 경제가 성장함과 동시에 사회적으로 급격하게 증가하는 건축물의 수요를 충족시키기 위해서 표준화, 대량 생산화가 가능한 건식 공법이 각광을 받고 있다. 이러한 현실에 부응하여 에너지 절감효과 및 공사기간 단축, 다양한 형태로 적용이 가능하고 경제성을 가지는 샌드위치 패널이 많이 사용되고 있다. 샌드위치 패널의 형태는 양면 도장 강판 사이에 유기계 및 무기계 단열재를 합성한 복합 자재이다. 유기계 단열재는 PUR(Poly-uretane foam) 및 EPS(Expanded poly-stylene foam) 등이 사용되며, 무기계 단열재는 Glass wool 및 Mineral wool 등이 사용된다. 유기계 단열재는 화재 시 불이 잘 붙어 대피할 수 있는 시간 부족과 유독가스의 발생으로 인명피해가 크게 발생할 수 있지만, 무기계보다 가격이 싸서 유기계 재료를 사용한 샌드위치 패널이 많이 사용되고 있다. 반면, 무기계 단열재 중 경량기포콘크리트는 단열성과 내화성, 경량성 등이 뛰어나기 때문에 샌드위치 패널에 적용하여 유기계의 단점을 해결하기 위한 많은 연구가 수행되어져 왔다. 단열성 및 내화성, 경량성이 뛰어난 경량기포콘크리트는 기포제를 활용하여 시멘트 경화체 내에 다량의 공극을 발생시켜 제조한 것으로서 역학적 특성은 사용되는 기포제와 발포제의 종류에 따라 많은 영향을 받게 된다. 기포제는 계면활성작용에 의해 물리적으로 기포를 도입하는 것으로써 공기량은 최고 85%까지 생성될 수 있으며, 크게 계면활성제계, 가수분해 단백질계로 구분될 수 있다. 계면활성제계 기포제는 수용액 상에서 기포시키면 안정되고, 점성이 높은 기포가 생기지만 시멘트 슬러리와 혼합 시 안정성이 저하되어 서로 연속된 형태의 기포를 형성한다. 가수분해 단백질계 기포제는 계면활성제계 기포제와는 달리 시멘트 슬러리와 혼합 시 안정되고 서로 독립적인 형태의 기포를 형성하게 된다. 발포제는 금속분말이 알칼리 용액과 접촉하여 수소가스를 발생시키는 원리를 이용하는 것으로써 현재 Autoclaved Light-Weight Concrete(ALC)의 제조에 사용되고 있다. 이와 같이 경량기포콘크리트 제조에 사용되는 기포제 및 발포제는 특성이 각기 다르기 때문에 내부 공극이 변화되고 이에 따라 경량기포콘크리트의 물리적, 단열특성이 변화될 것으로 예상된다. 따라서 본 연구에서는 기포제와 발포제를 사용한 경량기포콘크리트를 샌드위치 패널의 내부 단열재로 활용하는 기초적자료를 제공하기 위한 실험적 연구를 수행하였다. 즉, 경량기포콘크리트를 제조하는데 가장 일반적으로 사용하고 있는 기포제 및 발포제를 대상으로 하여 각각의 첨가량에 따른 경량기포콘크리트의 기포구조 및 열적특성을 검토함으로써 경량기포콘크리트의 높은 단열성능을 확보하기 위한 최적조건을 제시하기 위한 실험 실증적 연구를 수행하였다.

• 한국환경보건학회지
• /
• 제20권2호
• /
• pp.28-38
• /
• 1994

New problems have been recently posed on the abnormal foaming (Scum) in an aeration tank and the sludge flotation in a final sedimentation tank during the activated sludge process. However, the activities of the causing bacteria, Nocardia-amarae in an aeration tank have not been searched out at all. Therefore, in this article the activities of Nocardia-amarae in an aeration tank have been closely examined by means of the changes of (F/M) ratio, SRT and inflowing substrate using continuous type and fed-batch type. Summarized results of experiments are as follows. 1. Regrading continuous culture when synthetic wastewater was used substrate neither the increase in the number of Nocardia-amarae in the aeration tank nor the Occurrence of Scum was observed. 2. In the case of fed-batch culture, Nocardia-amarae in the aeration tank increased due to the partial change in substrate and the effect of SRT was significant. 3. Once the scum was formed and the quantity of added Nocardia-amarae and substrate were not changed, the effect of STR was not significant.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.144-149
• /
• 1993

The results of an experimental study on the manufacture and the mechanical properties of carbon fiber reinforced silica fume.cement composites and light weight fly ash.cement composites are presented in this paper. The CF reinforced silica fume.cement composites using silica fume early strength cement were prepared with Pan-derived or Pitch-derived CF, and Lt. Wt, fly ash.cement composites using fly ash, early strength cement, perlite and a small amount of foaming agent. As the test results show, the flexural strength, toughness and ductility of CF reinforced silica fume .cement composites were remarkably increased by fiber contents. Also, the manufacturing process technology of Lt. Wt. fly ash.cement composites was developed and its optimum mix proportions were proposed. And the compressive and flexural strength of the fly ash.cement composites by hot water cured were improved even more than by moist cured, but are decreased by increasing fly ash replaced ratio for cement.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.917-925
• /
• 1991

For the present experiment five Portland cement mortars are in order: mortars with two different water/ cement ratios (W/C=0.45 and 0.50, each having no chemical additive), and those with an additive such as superplasticizer, air-entraining agent or water-repelling agent. We fix the W/C ratio of mortars having additive so that their pastes can yield the same workability as that of the cement mortar of W/C=0.50 with no additive. It is shown that the freeze-thaw resistivity depends heavily on the characteristic of wide pores. Despite a good deal of wide pores, the air-entrained specimen shows a good freeze-thaw resistivity due to appropriate air-pores. And also the specimen with water-repelling agent, which proves to cause the microstructure to become hydrophobic, make good resistance to freeze-thaw cycles in spite of its high wide-porosity. Our suggestion is that the freeze-thaw durability of Portland cement mortar/concrete can be more effectively enhanced by using air-entraining agent or water-repelling agent, and simutaneously by taking proper measures against foaming and/or the increased tendency of wide-pore building due to additive.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.269-270
• /
• 2002

Oxygen is a key substrate in animal cell metabolism and its consumption is thus a parameter of great interest for monitoring and control in animal cell culture bioreactor. The use of a gas-permeable membrane offered the possibility to provide the required quantity of oxygen into the culture. while avoiding problems of foaming or shear damage generally linked to sparging. For determining the optimum DO control strategy of this gas-permeable membrane aeration bioreactor, the oxygen transfer rate coefficient was measured with varying $N_2$ ratio in inlet air. The results showed that an increasing mass flow rate of nitrogen reduced the $K_La$ value. and 5% nitrogen in air did not result in any oxygen limitation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.49-52
• /
• 2003

The objective of this study the mechanical characteristics of prefoamed lightweight foamed concrete using the mineral foam agent which has high lightness, and strength. The compressive strength of lightweight foamed concrete using mineral foam agent are about 2 times degree high those the of lightweight foamed concrete using vegetable foam agent. Lightweight foamed concrete was able to obtain the result of 50kg/㎠ or more compressive strength, when was unit weight 0.8t/㎡. In the case of the same unit weight of concrete, it is influenced by w/c of foam agent ratio. The paper present extensive data on characteristics of compressive strength of the concrete manufatured with the different factors in mix design and also present optimum mix proportion.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.49.1-52
• /
• 2003

The objective of this study the mechanical characteristics of preformed lightweight foamed concrete using the mineral foam agent which has high lightness, and strength. The compressive strength of lightweight foamed concrete using mineral foam agent are about 2 times degree high those the of lightweight foamed concrete using vegetable foam agent. Lightweight foamed concrete was able to obtain the result of 50kg/$\textrm{m}^3$ or more compressive strength, when was unit weight 0.8t/$\textrm{m}^3$. In the can of the same unit weight of concrete, it is influenced by w/c of loan agent ratio. The paper present extensive data on characteristics of compressive strength of the concrete manufactured with the different factors in mix design and also present optimum mix proportion.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.131-135
• /
• 2018

This study was aimed at improving the white index (WI) to prepare thermally expandable microspheres for wallpaper. In particular, thermally expandable microspheres were prepared for different colloidal silica particle sizes to study thermal properties, foaming ratio, and WI. The spheres obtained from tiny colloidal silica were the best in terms of WI and yellowing. Additionally, thermogravimetric analysis results show that small colloidal silica particles are more likely to be adsorbed physically or chemically to the microsphere surface, thereby improving WI at higher temperatures.