• 한국응용과학기술학회지
• /
• 제21권2호
• /
• pp.156-163
• /
• 2004

Low foaming scouring agents (LSSA) were prepared by blending of amine salt of dodecylbenzene sulfone, poly (PO-b-EO) glycol, Newpol PP-2000, MJU-100, ethylene glycol and organic solvent. As the results of several tests, LSSA-2 showed good scouring effect, penetrating ability and emulsifiability, and showed not much water pollution. The foaming power of LSSA-2 measured by Ross & Miles method was 11mm foam height immediately after foaming. And the foaming power of LSSA-2 measured by Ross & Clark method were less than 310mm foam height at $30^{\circ}C$, 17mm at $80^{\circ}C$. As a result, LSSA-2 was proved as a good foaming scouring agent.

• 한국응용과학기술학회지
• /
• 제23권1호
• /
• pp.37-44
• /
• 2006

Solvent-free low foaming scouring agents (LFSC) were prepared by blending of 2-ethylhexylaminoethyl sulfate (2-EHAS), POE(10) octadecylbenzyl- ammonium chloride (POBAC) and Sedlan FF-200 (FF-200). As the results of several tests, 2-EHAS/POBAC/FF-200/water (8g/12g/20g/60g) mixture (LFSC-5) showed good cleaning power, penetrating ability and stability to alkali, and gave less problem in water pollution. The foaming power of LFSC-5 measured by Ross and Miles method was 8mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 18mm at $80^{\circ}C$. As a result, LFSC-5 proved a good low foaming scouring agent for fiber.

• 공업화학
• /
• 제4권2호
• /
• pp.358-364
• /
• 1993

2-Ethylhexylaminoethyl sulfate, Na-dioctyl sulfosuccinate, Newpol PP-2000, MJU-100, 에틸렌글리콜 및 유기용제 등을 블렌딩하여 저기포성 정련제(SLFS)를 제조하였다. SLFS로서 여러가지 물성시험을 해 본 결과, SLFS-2는 정련효과, 침투력, 유화력, 내알칼리성 등이 양호하였으며, 수질오염에 대한 영향이 크지 않았다. 또한 SLFS-2는 Ross & Miles법에 의한 거품생성 직후의 기포력이 포고 8mm로 나타났고, Ross & Clark법에 의한 기포력이 $30^{\circ}C$에서는 포고 300mm 이하로, $80^{\circ}C$에서는 15mm를 각각 나타내어 양호한 저기포성 정련제임이 입증되었다.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.40-46
• /
• 2013

This paper describes the suggestion of the special seat with the auxiliary plastic member for movie theater chair. In the previous paper, we have reported on the development of foaming sponge seat with the auxiliary spring member. And we have confirmed that it was more effective on vibration transfer than the chair seat of foaming sponge only. In this study, we have examined the major design parameters needed in the development of a foaming sponge seat in which the mesh type plastic member are inserted to improve the vibration transfer effect of a chair seat. By applying experimentation to the prototype as well as the experimental modal analysis method, we made sure that the effect of the vibration transfer could be improved through the use of a mesh type plastic member as similar as the auxiliary spring member.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.45-50
• /
• 2014

In the previous paper, we have reported on the development of foaming sponge seat with the auxiliary spring member and suggested new possibility of the special seat with the auxiliary plastic member for movie theater chair. In this study, we have examined the major design parameters needed in the development of a foaming sponge seat in which the mesh type plastic member are inserted to improve the vibration transfer effect of a chair seat. Through analyzing several prototypes by applying experimentation as well as the experimental modal analysis method, it was confirmed that the effect of vibration transfer can be improved through the use of a mesh type plastic member and applied to the design of practical chair seat.

• 동력기계공학회지
• /
• 제16권1호
• /
• pp.24-29
• /
• 2012

Recently, in the movie theater, the special chair is installed to maximize the viewing effect of movies. It is structured to convey a vibrational stimulus to a specially-designated parts of human body by attaching a vibration transducer to a existing theater chair. This paper describes the analysis of the vibration transfer characteristic of a foaming sponge seat for the design of the special chair. We could not apply the structural analysis S/W because it is difficult to obtain the mechanical properties and damping coefficients of the various type sponges. And then we computed the transfer functions by the global curve fitting program based on experimental modal analysis. The experimental response results comparatively coincide with those by the global curve fitting program. We also could obtain the natural frequencies, the modal damping coefficient ratio, the modal vectors and the whole transfer functions. Therefore we could analyze the dynamic characteristic for design of foaming sponge seat.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.677-683
• /
• 2012

1-octanethiol and vinyl acetate telomers ($R_8S$-nVAc) were synthesized and hydrolyzed with sodium hydroxide subsequently, 1.2-epoxyhexane was then introduced to the telomers. In addition, we prepared cotelomers of multi-alkylated nonionic surfactants with a molecular structure of xRnMA-yVA (x; hydrophobic group, y; hydrophilic group, MA; methacrylic ester, VA; vinyl alcohol, R; and alkyl group) and cross-linked with sodium tetraborate decahydrate. Their active surface properties were investigated by several techniques such as surface tension, foaming property, and emulsification power measurements. The surface tension of $R_8S$-8.8VA decreased without the introduction of 1.2-Epoxy hexane, and the degree of emulsification and foaming abilities of $R_8S$-8.8VA increased without the introduction of 1.2-Epoxy hexane. However, the differences were insignificant. The epoxy groups were attached to a $R_8S$-8.8VA cotelomer with a limited variation of the active surface properties. The surface tension of $1.1R_6MA$-8.8VA decreased after cross-linking subsequently, the degree of emulsification and foaming abilities of $1.1R_6MA$-8.8VA increased after cross-linking. However, there was no clear difference between them. The B-O bonds were attached to a $1.1R_6MA$-8.8VA cotelomer with a limited variation of the active surface properties.

• 한국응용과학기술학회지
• /
• 제39권4호
• /
• pp.488-498
• /
• 2022

본 연구에서는 계면활성제 용액에서 1,3-Butanediol, 1,2-Pentanediol, 1,2 Hexanediol 들이 cmc, 표면장력, 기포력 및 유화력에 미치는 영향을 연구 하였다. 계면활성제 수용액에 diol의 첨가는 cmc와 표면장력 저하를 초래 하였으며 기포력 및 유화력은 향상 되었다. 이러한 경향은 diol의 사슬길이가 길수록 현저 하였다. 이러한 특성은 diol의 알킬사슬과 계면활성제 분자간에 소수성 상호작용이 물분자간의 응집력을 감소시키고, 계면에서 계면활성제 headgroup간 상호작용을 증진시키기 때문이다. 또한 각 diol의 방부력을 평가하기 위하여 MIC 측정을 수행 하였으며 방부력은 1,2-HDO > 1,2-PDO > 1,3-BDO 순서였다. 본 연구의 결과들은 diol들이 화장품에서 보조 계면활성제와 방부제로 이용될 수 있음을 확인 시켜 주웠다.

• 한국가정과학회지
• /
• 제4권1호
• /
• pp.62-67
• /
• 2001

달걀에 0.5∼3.0kGy의 방사선을 조사한 다음 난백을 분리하여 비조사 및 조사 난백의 물리적, 기능적 특성을 비교 $.$검토하였다. 방사선 조사 달걀을 30$\^{C}$에서 2시간 방치한 다음 난백을 분리하여 실험재료로 사용하였다. 점도는 방사선을 조사하지 않은 대조군 난백이 가장 높았다. 조사 난백의 점도는 조사선량이 가장 낮은 0.5kGy에서 급격히 감소하였으며 이 후 완만한 감소를 보였다. 달걀을 할란하여 난백의 상태를 비교한 결과, 대조군 난백은 농후난백과 수양난백의 구분이 뚜렷했으나, 조사 난백은 구별할 수 없었다. 난백의 pH는 방사선 조사의 영향을 받지 않았다. 한편 색도는 방사선 조사에 따라 명도와 녹색도가 낮아졌다(p<0.05). 난백의 기포형성력은 overrun으로 측정하였는데, 조사 난백은 대조군에 비해 overrun이 증가하였다(p<0.05). 조사선량 3kGy인 난백의 overrun은 대조군 난백에 비해 1.7배 정도 높았다. 난백의 기포 안정성은 기포를 30분 방치하는 동안 유리되는 액량으로 검토하였다. 유리액량은 대조군 난백이 가장 많았다(p<0.05). 조사 난백의 유리액량은 조사선량이 증가함에 따라 감소하였다

• 공업화학
• /
• 제29권6호
• /
• pp.753-758
• /
• 2018

미생물 발효 생계면활성제인 람노리피드의 계면활성(CMC, 표면장력, 기포력 등)을 측정하였다. 람노리피드는 우수한 표면활성을 나타내었다. 람노리피드가 처방된 세정제도 우수한 표면활성을 나타내었다. 액체세정제의 성능평가 결과 지방산 대비 람노리피드가 사용된 제품의 성능이 미세하게 우세하였다. 그렇지만 기포 프로화일에서는 람노리피드가 처방된 제품의 기포량이 아주 많았으며, 헹굼과정에서 지방산의 억포작용과 같은 헹굼성 보조 작용은 나타나지 않았다. 람노리피드는 생계면활성제로써 주계면활성제 또는 보조계면활성제로써 사용될 수 있을 것이다. 그러나 지방산과 같은 억포제 또는 헹굼 보조 기능은 가지지 않은 것으로 판단된다.