• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.5
• /
• pp.381-389
• /
• 2011

In this study, we are focusing our attention on lift characteristics of the low aspect wings for Wing-In Ground effect crafts (WIG). Experimental measurements at an open-type wind tunnel are carried out and results are comparatively presented. In order to simulate the realistic ground condition in where the WIG craft is flying, moving ground is implemented by a conveyor belt rotating with the same velocity of the inflow. We consider two different wings (NACA0012 and DHMTU section) which have four different aspect ratios (0.5, 1.0, 1.5 and 2.0). Forces acting on the wings are measured and lift characteristics are elaborately investigated for various different conditions. In addition, end-plate effects are estimated. Results are validated by comparing with theoretic solutions of the symmetric airfoil. Present results show that ground effects are differently generated in moving or fixed ground conditions, and hence left characteristics are affected by the ground condition. Consequently, accurate aerodynamic forces acting on the WIG craft are guaranteed in a realistic moving ground condition.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.95-100
• /
• 2002

The wing in ground effect (WIG) ship is an energy saying vessel that uses the lift from its air-wing along with the lift increase from the ground effect by flying low above the sea surface. The WIG Ship should consist of thin plate in order to float on the sea and to fly in the air. Therefore, the structure of WIG, Ship has very thin and light shell plate and stiffener like stringer and frame has comparatively large cross section area. This structure makes shell plate nearly pure shear field when shell plate is pressed by in-plane load. This complex thin plate structure of WIG Ship can he considered as a closed section beam which makes it possible to analyze structure response of WIG Ship affected by shear load and bending load. In this respect, the present study will show basic theory for analysing shear stress and focus on the analysis of structure strength of model WIC Ship's wing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.988-995
• /
• 2008

A consensus-based feedback linearization method is proposed to maintain a specified time-varying geometric configuration for formation flying of multiple autonomous vehicles. In this approach, there exists no explicit leader in the team, and the proposed control strategy requires only the local neighbor-to-neighbor information between vehicles. The information flow topology between the vehicles is defined by Graph Laplacian matrix, and the formation flying can be achieved by the proposed feedback linearization with consensus algorithm. The stability analysis of the proposed controller is also performed via eigenvalue analysis for the closed-looop system. Numerical simulation is performed for rotary-wing type micro aerial vehicles to validate the performance of the proposed controller.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.49-57
• /
• 2003

The flight trajectory of a boomerang is predicted with the momentum theory (actuating disk theory) and the blade element method generally used as tools to analyze in the rotary-wing aerodynamics. Boomerangs made by students are actually compared with the computational results, utilized to get the physical intuition. The transition from helicopter mode to autogyro mode with the gyroscopic precession is observed in numerical analysis and experiment like a 'flying rotor' after the boomerang taking off. The whole system is shown to be highly nonlinear and very sensitive to the initial conditions. Various flight loci may be obtained if we change the parameters.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.61-69
• /
• 2013

In an evaluation process of aircraft flying qualities, a clear and concise application interface is important since an evaluation process requires numerous repeated evaluation. This flight evaluation program have implemented efficient flight evaluation user interface along with changed trim condition interface and composed of comprehensive evaluation interface have mounted all automated FQ evaluation modules that was selected to be compose of 14 items in respect of an unmanned fixed-wing aircraft. Accordingly when it is necessary to design the flight control system as well as to develop a FQ considered aircraft, this S/W can be utilized as a tool that is a useful test evaluation S/W with scalability and enable to reduce the time and the cost of verification and evaluation process.

• The Korean Journal of Zoology
• /
• v.14 no.2
• /
• pp.75-84
• /
• 1971

Genetic analysis of a new wing mutant, Surf wings (Srf), was performed. Mutant flies were extracted from a wild population of Drosophila melanogaster at the vicinity of Atomic Energy Research Institute, Seoul in August-September 1969. 1. The distal half of wings of heterozygotes (Srf/+) turned upwards about 40 degree from body axis, but flying ability was not disturbed. They overlap Cy in low frequency when they are grown below $22^{\circ}C$. This resembles with Si or j series, but wing margins are not rolled and diversed. Postscutellars are erected slightly, but they, in general, are not crossed. Any other external pleiotropic effects were not observed. 2. Penetrance and expressivity of both sexes are not complete. Their extents are variable with sex and temperature. These characters show maximum tendencies when the development is made at $22^{\circ}C$ (female: P = 0.996, E = 0.932, male:P = 0.961, E = 0.698). 3. The preliminary locus of Srf was determined to be 66.8 on the right arm of second chromosome by using recessive maker gene cn bw. 4. The homozygous flies(Srf/Srf) have shown perfect lethality. The heterozygotes (Srf/+), on the other hand, have shown to be viable and fertile. Srf chromosomes are kept in a balanced lethal system with Pm chromosomes which are associated with inversions. Hence, it is partially reasonable to suppose that Srf may persist in a natural population by the same mechanism. 5. Allelism test with Cy was also conducted. The fact that combination with Cy in the trans-phase (+ Srf/Cy +) is viable in contrast to the lethality of Srf/Srf and Pm/Pm indicates that Srf and Cy are not functionally allelic.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.71-74
• /
• 1995

A numerical model capable of simulating a 2-D airfoil flying over in the vicinity of the waves is discussed. Instead of treating the problem as a heaving oscillation one above the rigid flat wall, sources are distributed on the prescribed wave profile. The wave deformation due to the airfoil is assumed to be negligible and treated as a rigid undulated wall. The source and vortex are distributed on the surface of the foil. It is found that the variation of $C_L$ with wave steepness in severe and that the lift variation due to waves decreases as the wing height above the water surface increases.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.2
• /
• pp.19-24
• /
• 2016

Positional stability analysis based on aerodynamic forces and induced moments of formation flight using two small aircraft models is presented. The aerodynamic force and moments of the trailing aircraft are analyzed in the aspect of flight stability. The induced moments with the change of local flow direction by wing-tip vortex from the leading aircraft can affect the flight positional stability of aircraft in closed formation flight. Aerodynamic forces and moments of trailing aircraft model are measured by 6-component internal balance at the 49 locations with vertical and lateral space between two aircraft models. Results are shown that the positional stability of trailing aircraft in formation flight can be analyzed by positional stability derivatives with vertical and lateral space. It is concluded that flying positions can be important factors for aircraft position stability due to induced aerodynamic force and moments with vertical and lateral spacing by the variation of flow pattern from the leading aircraft in formation flight.

• Journal of Institute of Convergence Technology
• /
• v.7 no.1
• /
• pp.23-29
• /
• 2017

A pterosarus is an ancient flying reptile and the first vertebrate with powered flight. The shapes of the pretosarus'airfoil in the published literature are reconstructed. The aerodynamics of the Pterosarus is obtained using a free software XFOIL. The steady aerodynamics of the Pterosarus' airfoil are investigated focusing on the gliding performance. The numerical results are validated by comparing the computed aerodynamic coefficients with the measured data. The secretes of the Pterosarus' highly camberred airfoil are elucidated by comparing the aerodynamics with that of the birds'.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.674-681
• /
• 2005

The unsteady evolution of trailing vortex sheets behind wings in close formation flight near the ground is simulated using a discrete vortex method. The ground effect is included by an image method. The method is validated by comparing computed results with other numerical results. For a lifting line with an elliptic loading, the ground has an effect of moving wingtip vortices laterally outward and suppressing the development of vortex evolution. The gap between wings in close formation flight has an effect of moving up wingtip vortices facing each other. For wings flying in parallel, the ground effect causes the wingtip vortices facing each other to move up, and it makes the opposite wing tip vortices to move laterally outward. When there is a relative height between the wings in ground effect, right-hand side wingtip vortices from a mothership move laterally inward.