• Explosives and Blasting
• /
• v.24 no.2
• /
• pp.75-82
• /
• 2006

Most of limestone mines in Korea have been developed by a open-cut mining method in consideration of a deposited condition of ore, ore recovery, safety, economic efficiency, etc.. But it has produced environmental problems such as dust flying, blasting noise & vibration, and spoil of farmlands due to slope failure of waste rock mass caused by access road construction, fragmentation & crush of rocks, blasting, transportation, and mineral processing. In this study, it has been suggested for measures to reduce mine hazards caused by open- cut mining of limestone nines.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.111-114
• /
• 2013

Underground construction requires long construction duration and a variety of equipment, and environmental management and improvement of its activities are considered necessary. For the purpose of the environmental improvement of underground construction activities, the appropriate development of technologies to reduce generated pollutants is mandatory. However, the analysis of the needs of technology development and the evaluation of development priorities should take precedence. In this research, the needs for the improvement of each construction activity are analyzed as a preliminary study for a proposed technology development plan to improve the environmental performance of underground construction. Firstly, environmental problem factors caused by underground construction activities are determined while underground construction types, methods, and activities are classified. A questionnaire survey to determine the needs for the improvement of each activity is then carried out. The survey indicated that the most urgent activity to be improved is that of cutting excavation, which causes environmental problems associated with flying dust. This study could be used as a basis for a technology development plan for the environmental improvement of underground construction activities. The result of this study, the priority of improvement needs, contributes to the effective allocation of a limited Research and Development (R&D) budget.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.4
• /
• pp.100-108
• /
• 2010

With the rapid economic growth and improvement of living conditions in Korea, rebuilding and redevelopment of existing houses has also been rapidly increasing. As a result, considerable construction and demolition wastes have been produced. Demolition wastes, however, must be given special attention because of the various harmful substances in them. The construction waste has been produced most at demolition phase, but the research into that area has not being to make nearly within the country. The aim of this study was to evaluate and compare the contamination figures of the heavy metals and toxin organic substances in the soil and water caused by flying ashes generated and eventually accumulated in building demolition works. AB a result. most of the pollution levels were not worrisome, but some were increased after the demolition with the water used to prevent the dusty air and in the target buildings. However in the vicinity of the demolition sites with explosives there was no report of study in water and soil pollutions, so to minimize pollutions we need to make plans to select the harmful substance in the first place. Thus, this research is expected to be the important materials for future research into the construction waste area.

• Journal of Environmental Impact Assessment
• /
• v.13 no.4
• /
• pp.197-211
• /
• 2004

Visibility impairment was known as an indicator of the increased air pollution. In many previous studies, it is known that both directly emitted fine particles mainly from vehicles and secondary aerosols from photochemical reactions could contribute to this visibility impairment in addition to the meteorological condition. Furthermore, the visibility showed different change patterns according to the geographical condition. In order to research into the influence of these factors on visibility, this study analyzed the visibility at 15:00, observed from 1990 to 2001 in Seoul, Ganghwa, Susan, Gwangju, Jeju. As a result, the visibility was increased in Seoul except the rainfall period, but in Susan, Gwangju, Jeju, it decreased with the relative humidity (RH). Especially, in Seoul, the number of low visibility days was larger than other sites and variations of the visibility were sensitive to the concentration of air pollutants, such as TSP, $NO_2$, $O_3$. The visibility impairment was mainly observed in meteorological condition of RH<50% and relatively stationary front. Therefore it is inferred that photochemical smog could lead to the low visibility in Seoul. On the other hands, in Ganghwa and Susan, when RH was 60~70%, the low visibility observed under the influence of the transports of air pollutants from nearby cities as well as humid air mass from coastal region. And in Jeju, sea fog and humid air mass caused the visibility impairment when the RH was larger than 80%. Finally, during the observational period, some cases of low visibility phenomena were simultaneously observed in the vast region including Seoul, Susan, Ganghwa. It not only includes the visibility aggravation by Asian Dust, but also could be caused by the movement and diffusion of flying dust or secondary aerosols. Moreover, the result shows that these phenomena could be mainly influenced by meteorological factors covering the wide regions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.8
• /
• pp.992-1003
• /
• 2003

This study analyzes the actual state of the working uniforms worn by burning waste workers to protect their body from the hazardous environment. Directions for improvement of the clothing fabrics is also suggested. We visited and interviewed those persons who worked in the burning waste plant in Seoul and in Gyunggi Province. 245 workers were surveyed by questionnaires, and 211 workers out of 245 were statistically analyzed. Frequencies and percentages were calculated and $\chi$$^2$ test, ANOVA and Scheffe Post hoc comparison methods were utilized to test some hypothesis. The working uniforms were classified as four general types: separate type, disposable-coverall. overall, and winter clothes. At present, the working uniforms are not suitable for the conditions which they are used. There is a lack of ventilation and an inability to absorb perspiration limited elasticity, and the uniforms are prone to static shock. The degree of satisfaction varied significantly, based on the worker's educational background and main work. However, only a small percentage of workers interviewed were satisfied with the appearance and the fit of the present working uniforms. The working duration had a negative impact on the satisfaction of the worker. This results suggest that materials, colors, design and size of working clothes must be improved. The suggestions are as follows: Firstly. to use disposable non-woven fabrics finished to increase moisture regain. Secondly. to use the bad air permeability fabrics to protect the skin from absorbtion of harmful gases, flying dust, heavy metals, etc.

• Explosives and Blasting
• /
• v.21 no.3
• /
• pp.49-60
• /
• 2003

Nowadays it is tendency to make a remodelling or demolition of old structures with the rapid development of blasting technique. In this treatise it is arranged of improvement procedure of blasting demolition method in korea which was begun since August 1991. Recently, the blasting demolition method has much merits with 60-70% reduction effect of construction period than mechanical demolition method. and so that it has much economical points specially over than 5 storied high buildings. In order to maximalize economical effects of the blasting demolition method, environment safety and recycling, it must be needed. at first to develop the estimating programs against vibration, noise, flying stones, and dust. Also it is required to take a responsibility for using recycling materials after blasting demolition of old structures, and to be invested to advance the blasting demolition techniques.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.38-45
• /
• 2009

First of all, the properties imparted to PET fabrics are resistance to and recovery from creasing or wrinkling when wet or dry; high resistance to stretch in the filament yarns but not in the staple; high abrasion resistance; good texture and appearance; resistance to heat ageing; good chemical resistance and good resistance, behind glass, to sunlight. But, the low moisture regain of PET fabric conduces to static troubles in textile processing. Furthermore, garments made from PET may, during wear, develop electric charges which attract to the fabric particles of soil(dirt, swarf, dust) flying in the air, so that the cuffs of shirts, for example, become soiled quickly and are not easily laundered clean. The sericin constitutes 25$\sim$30％ of silk protein and surrounds the fibroin fiber with sticky layer that supports the formation of a cocoon. The useful biochemical properties of sericin protein are oxidation resistant, antibacterial, UV resistant, hydrophilic property, and good affinity with hydrophobic material. These properties can be used as an improving reagent or a coating agent for natural and synthetic fibers, fabrics, and other intermediate products. The sericin is also applied to cross-link, and can be blended with other materials. In this study, we modified the surface of PET fabric by mixture of sericin finishing agent; sericin, polyuretane binder and 1,2,3,4-butanetetracarboxylic acid (BTCA) cross-link agent. Also, we investigated the finshing effect; moisture regain, stiffness, handle, drape and electrostatic. The moisture regain of PET fabric treated with sericin finishing agent was higher than that of untreated PET fabric. As a result of evaluating influence about handle of PET fabrics treated with sericin finishing agent, it was confirmed that the sericin finishing agent could be use as a linen like finishing agent.